Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
-
Lisainfo: Bush,
stabilizer -
Additional information: Bush,
stabilizer
- Fitting Position: Rear Axle
- Thickness [mm]: 46
- Length [mm]: 46
- Width [mm]: 48
- Inner Diameter [mm]: 14
- Manufacturer: MERTZ
- Fitting Position: Rear Axle
- Material: Rubber
- Thickness [mm]: 46
- Length [mm]: 47
- Width [mm]: 48
- Inner Diameter [mm]: 12
- Manufacturer: MERTZ
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 46
- Length [mm]: 46
- Width [mm]: 48
- Inner Diameter [mm]: 14
- Manufacturer: MERTZ
- Fitting Position: Rear
- Inner Diameter [mm]: 13
- Fitting Position: Front Axle both sides
- Thickness [mm]: 57
- Length [mm]: 55
- Width [mm]: 60
- Inner Diameter [mm]: 27
- Manufacturer: MERTZ
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year to: 07.2008
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 79
- Inner Diameter [mm]: 13
- Manufacturer: GATES PASKI PRZEWODY
- Suspension: for vehicles with M technology
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 13
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 12
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 26.5
- Inner Diameter [mm]: 25
- Length [mm]: 60
- Width [mm]: 70
- Height [mm]: 70
- for OE number: 31356765574
- Manufacturer: SASIC
-
for SA code: L807A,
S226A, S704A - Fitting Position: Rear Axle
- Weight [kg]: 0.11
- Inner Diameter [mm]: 11
- Packaging length [cm]: 4.8
- Packaging width [cm]: 4.6
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST
-
for SA code: S226A,
S402A, S704A - Fitting Position: Rear Axle
- Weight [kg]: 0.107
- Inner Diameter [mm]: 13
- Packaging length [cm]: 4.8
- Packaging width [cm]: 4.6
- Packaging height [cm]: 4.6
- Manufacturer: FEBEST
- Stabiliser Bar Diameter [mm]: 13
- Length [mm]: 46.5
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 12.5
- Fitting Position: Rear Axle
- Weight [kg]: 0.079
-
Name: Paigutus -
Kndmik BMW T. E81/ 90/ 91/ 60 03- LE/ PR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 14
- Length [mm]: 46
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 14
- Fitting Position: Rear Axle
- Weight [kg]: 0.078
-
Name: Paigutus -
Kndmik BMW T. E90/ E60 Q: 14MM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 13
- Length [mm]: 46.5
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 12.5
- Fitting Position: Rear Axle
- Weight [kg]: 0.079
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 12
- Length [mm]: 46.5
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.08
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.14
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 14
- Length [mm]: 46
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 14
- Fitting Position: Rear Axle
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 12
- Length [mm]: 46.5
- Width [mm]: 48
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
- Material: Rubber
- Fitting Position: Rear Axle
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [kg]: 0.167
- Inner Diameter [mm]: 26
- Packaging length [cm]: 6
- Packaging width [cm]: 5.7
- Packaging height [cm]: 5.5
- Manufacturer: FEBEST
- Length [mm]: 55
- Width [mm]: 60
- Thickness [mm]: 57
- Inner Diameter [mm]: 26.5
- Fitting Position: Front Axle
- Weight [kg]: 0.14
-
Name: Paigutus -
Kndmik BMW P. E81/ 82/ 87/ 90 - Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Observe dimensions:
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 12.5
- Required quantity: 2
-
Name: Paigutus -
Kndmik BMW T. E81/ 90/ 91/ 60 03- LE/ PR - Manufacturer: MEY
- Observe dimensions:
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 13
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik BMW T. 1 (E81, E82, E87, E88) (11/03-09/12), 3 (E90, E91, E92, E93) (01/05-05/12), 5 (E60, E61) (07/03-08/10)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
- Required quantity: 2
-
Name: Paigutus -
Kndmik BMW P. E81/ 82/ 87/ 90 - Manufacturer: MEY
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 26.5
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 55
- Width [mm]: 60
- Thickness [mm]: 57
- Inner Diameter [mm]: 26.5
- Fitting Position: Front Axle
- Weight [kg]: 0.14
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 07.2008
- Quality: OE Performance
- Fitting Position: Rear
- Colour: silver
- Weight [g]: 114
- Manufacturer: GATES PASKI PRZEWODY
- Stabiliser Bar Diameter [mm]: 12
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 12
- Mounting Type: Rubber Mount
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- for SA code: 0704
- Suspension: for vehicles with sports suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 12.5
- Mounting Type: Rubber Mount
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
-
Material: PU
(Polyurethane) - Required quantity: 2
- Stabiliser Bar Diameter [mm]: 13
- Supplementary Article/Info 2: with grease cap
- Manufacturer: TEDGUM
- Name: TG TED38545
-
Material: PU
(Polyurethane) -
Fitting Position: Front Axle,
inner - Inner Diameter [mm]: 26
- Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG TED58261
- Fitting Position: Front Axle Left
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Right
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
-
Material: PU
(Polyurethane) - Required quantity: 2
- Stabiliser Bar Diameter [mm]: 11
- Supplementary Article/Info 2: with grease cap
- Manufacturer: TEDGUM
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks