• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Trailing Arm
• Material: Aluminium
• Net weight [kg]: 1.27

• Fitting Position: Front Axle Right, Front
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Track control arm, front, right
• Additional information: Track control arm, front, right

• Fitting Position: Front Axle Left, Front
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Track control arm, front, left
• Additional information: Track control arm, front, left

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Right
• Material: Cast Steel
• paired article number: 500 118
• Control/Trailing Arm Design: Single Link
• Supplementary Article/Info 2: with nut, with rubber mount, with ball joint
• Surface: Black-painted, Cathodic Painting
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Material: Cast Steel
• paired article number: 500 119
• Control/Trailing Arm Design: Single Link
• Supplementary Article/Info 2: with ball joint, with nut, with rubber mount
• Surface: Black-painted, Cathodic Painting
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Material: Steel
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Material: Steel
• Quality class: PJ
• Name: Control arm left

Lisainfo: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)"

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 5 E34 88-
(kvaliteediklass: PJ)"

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 5 E34 88-
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, Right
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Warranty: 3 years warranty
• paired article number: 04SKV933
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Lower Front Axle, Left
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Warranty: 3 years warranty
• paired article number: 04SKV934
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right, Rear
• Control/Trailing Arm Type: Control Arm
• Lisainfo: Track control arm, front, right
• Additional information: Track control arm, front, right

• Fitting Position: Front Axle Left, Rear
• Control/Trailing Arm Type: Control Arm
• Lisainfo: Track control arm, front, left
• Additional information: Track control arm, front, left

• Fitting Position: Front Axle, Left, Lower
• Control/Trailing Arm Type: Control Arm
• Thread Size: M14X1.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Right, Lower
• Control/Trailing Arm Type: Control Arm
• Thread Size: M14X1.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 324
• Thread Size 2: M14x1.5
• Material: Cast Steel
• paired article number: 26-09635-1
• Weight [kg]: 1.52
• Name: DY 26-09635-2
• Manufacturer: DYS

• Fitting Position: Lower, Front, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• paired article number: V20-7033-1
• Weight [kg]: 2.128
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Lower
• Thread Size 1: M14x1.5
• Thread Size 2: M14x1.5
• Material: Steel
• paired article number: TC285
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 375
• Width [mm]: 70
• Height [mm]: 82.7
• Manufacturer: DELPHI

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Material: Aluminium
• paired article number: 500 117
• Control/Trailing Arm Design: Single Link
• Supplementary Article/Info 2: with ball joint, with nut, with rubber mount
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• paired article number: 07512
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 2
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front Axle Right
• Material: Steel
• Rod/Strut: Pressure Rod
• Supplementary Article/Supplementary Info: without attachment material
• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW7 E32 -94
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW7 E32 -94
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Lisainfo: Track control arm, front, left
• Additional information: Track control arm, front, left

• Fitting Position: Front Axle Right, Front
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Lisainfo: Track control arm, front, right
• Additional information: Track control arm, front, right

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, Front
• External Thread 2 [mm]: M14x1,5
• Length [mm]: 324.3
• Weight [kg]: 1.66
• Manufacturer: RTS

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front
• External Thread 2 [mm]: M14x1,5
• Length [mm]: 324.3
• Weight [kg]: 1.66
• Manufacturer: RTS

• Fitting Position: Front Axle Right, Lower
• Thread Size 1: M14x1.5
• Thread Size 2: M14x1.5
• Material: Steel
• paired article number: TC286
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 375
• Width [mm]: 70
• Height [mm]: 82.7
• Manufacturer: DELPHI

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front Axle Left
• Material: Steel
• Rod/Strut: Pressure Rod
• Supplementary Article/Supplementary Info: without attachment material
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW7 E32 -94
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW7 E32 -94
(kvaliteediklass: PJ)"

• paired article number: 20 73 0015
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 2
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 20 73 0009
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 2
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Left, outer, Lower
• Weight [kg]: 1.6
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: L1157
• Packaging length [cm]: 41
• Packaging width [cm]: 10
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Right
• Material: Aluminium
• paired article number: 500 116
• Control/Trailing Arm Design: Single Link
• Supplementary Article/Info 2: with rubber mount, with nut, with ball joint
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Material: Aluminium
• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Material: Aluminium
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 E34 88- / 93-
(kvaliteediklass: PJ)"

• Fitting Position: behind the axle, Front Axle Left, outer, Lower
• Cone Size [mm]: 16.5
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 325
• Control/Trailing Arm Type: Trailing Arm
• as standard:
• paired article number: 210059
• Weight [kg]: 1.111
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: behind the axle, Front Axle Right, outer, Lower
• Cone Size [mm]: 16.5
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Aluminium
• Length [mm]: 325
• Control/Trailing Arm Type: Trailing Arm
• as standard:
• paired article number: 210058
• Weight [kg]: 1.08
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Length [mm]: 324
• Thread Size: M14 x 1,5
• Cone Size [mm]: 16.5, 18.3
• Inner Diameter [mm]: 12
• paired article number: 78966AL
• Name: ALT 78965AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Length [mm]: 324
• Thread Size: M14 x 1,5
• Cone Size [mm]: 16.5, 18.3
• Inner Diameter [mm]: 12
• paired article number: 78965AL
• Name: ALT 78966AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Material: Cast Aluminium
• Fitting Position: Front Axle Left
• Axle alignment required after fitting:
• paired article number: V20-7046
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 1.288
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• paired article number: 26-82219
• Weight [kg]: 1.06
• Name: DY 26-82218
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Front, Lower
• paired article number: VKDS 328586 B
• Length [mm]: 325
• Bore Ø [mm]: 12.2
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Name: SK VKDS328585B
• Manufacturer: SKF

• Fitting Position: Front Axle Right, Front, Lower
• paired article number: VKDS 328585 B
• Length [mm]: 325
• Bore Ø [mm]: 12.2
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Name: SK VKDS328586B
• Manufacturer: SKF

• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 5 E34 '88-95
(kvaliteediklass: PJ)"

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 5 E34 '88-95
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, Right Front, outer
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with accessories
• Material: Steel
• paired article number: JTC258
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle, Left Front, outer
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with accessories
• Material: Steel
• paired article number: JTC259
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Lower
• Thread Size 1: M14x1.5
• Thread Size 2: Bush 12.2
• Material: Aluminium
• paired article number: TC804
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 375
• Width [mm]: 80
• Manufacturer: DELPHI

• Required quantity: 1
• Engine Code: M30 B30 (306KA)
• Fitting Position: Upper Front Axle, Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49399061
• Name: COC 49399060
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• paired article number: 49399060
• Name: COC 49399061
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, Lower
• Thread Size 1: M14x1.5
• Thread Size 2: Bush 12.2
• Material: Aluminium
• paired article number: TC805
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 375
• Width [mm]: 80
• Name: DE TC804
• Manufacturer: DELPHI

• paired article number: 01078
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 1.16
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 01071
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 1.16
• Supplementary Article/Supplementary Info: with lock nuts
• Supplementary Article/Info 2: with ball joint, with bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle alignment required after fitting:
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• paired article number: V20-7045
• Material: Cast Aluminium
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 1.288
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Upper Front Axle, Left, outer
• Control/Trailing Arm Type: Control Arm
• paired article number: JTC125
• Manufacturer: TRW
• Additional information: JTC124
• Lisainfo: JTC124

SVHC: No information available, please contact the manufacturer!

• paired article number: 20 73 0026
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 1.16
• Supplementary Article/Supplementary Info: with lock nuts
• Supplementary Article/Info 2: with ball joint, with bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 20 73 0027
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 1.16
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Engine Code: M 30B30D
• Fitting Position: Upper Front Axle, Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right, Lower, Front
• Length [mm]: 324
• Bore Ø [mm]: 12.1
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Name: SK VKDS328577B
• Manufacturer: SKF

• Fitting Position: Lower, Front, Front Axle Left
• paired article number: VKDS 328577 B
• Length [mm]: 324
• Bore Ø [mm]: 12.1
• Material: Aluminium
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Name: SK VKDS328578B
• Manufacturer: SKF

• Fitting Position: Lower Front Axle, Right Front, outer
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with accessories
• Material: Aluminium
• paired article number: JTC142
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle, Left Front, outer
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with accessories
• Material: Aluminium
• paired article number: JTC143
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Left, Front
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Supplementary Article/Info 2: with rubber mount
• paired article number: 10498 01
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Right, Front
• Control/Trailing Arm Type: Control Arm
• Material: Aluminium
• Supplementary Article/Info 2: with rubber mount
• paired article number: 10497 01
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!