• Installatsiooni pool: katalüsaatori ees
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 295
• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Lambda andur: Sond
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Installatsiooni pool: pärast katalüsaatorit
• Ülekandeliinide arv: 4
• Lülituspunkt [°C]: 98
• Kaablipikkus (mm): 1 000
• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Lambda andur: soojendatud
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 370
• Fabrication Number: ESL-BM-003
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 955
• Fabrication Number: ESL-BM-004
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: before catalytic converter, after catalytic converter

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistikukatte kuju: ümar
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 905
• Ühendushulk: 4
• Pikkus (mm): 1 020
• Ülekandeliinide arv: 4
• Kaal (kg): 0,174
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M73 B54
• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Pikkus (mm): 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda andur: Sond, Titaanandur
• Pikkus (mm): 320
• Pistikkontaktide arv: 4
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Takistus [oom]: 2,1
• Pikkus (mm): 350
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Kaablipikkus (mm): 350
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Engine Code: M73 B54 (54121)
• Quantity: 2
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Ühendushulk: 4
• Pistikukatte kuju: ümar
• Pikkus (mm): 570
• Ülekandeliinide arv: 4
• Kaal (kg): 0,142
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: M73 B54
• Voltage [V]: 12
• Length [mm]: 430
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV080

• Takistus [oom]: 2,1
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Pikkus (mm): 300
• Kaablipikkus (mm): 300
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 350
• Kaal (kg): 0,088
• Name: SW 33 10 3193
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 740
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV667

• Construction Year to: 09.1998
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV678

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Kaablipikkus (mm): 300
• Lambda andur: Sõrmesensor, soojendatud
• Manufacturer: DELPHI
• Name: DE ES10983-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Engine Code: M73 B54 (54121)
• Quantity: 2
• Length [mm]: 800
• Cable Length [mm]: 800
• Conductor Number: 4
• Lambda Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• Cable Length [mm]: 295
• Number of pins: 4
• Lambda Sensor: Heated
• Voltage [V]: 12
• Thread Size: M18 x 1,5
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 2
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: before catalytic converter, after catalytic converter

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Pistikukatte kuju: ümar
• Ühendushulk: 4
• Pikkus (mm): 300
• Ülekandeliinide arv: 4
• Kaal (kg): 0,123
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Pikkus (mm): 350
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Fitting Position: for cylinder 1-6, for cylinder 7-12
• Lambda andur: Sõrmesensor
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 350
• Pistikkontaktide arv: 4
• Installatsiooni pool: katalüsaatori ees
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: M73 B54 (54121)
• Quantity: 2
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ühendushulk: 4
• Pistikukatte kuju: ümar
• Kaablipikkus (mm): 675
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 800
• Ülekandeliinide arv: 4
• Kaal (kg): 0,161
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe
• Pikkus (mm): 800
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77004
• Manufacturer: FAE

• Fitting Position: left cylinder row, right cylinder row
• Production date from: 01.09.1998
• Lambda andur: Sõrmesensor
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 4
• Installatsiooni pool: pärast katalüsaatorit
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 800
• Number of circuits: 4
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 320
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 08.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 370
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 765
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS
• Lisainfo: 0258003561 BOSCH
• Additional information: 0258003561 BOSCH

• Construction Year to: 09.1998
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 580
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Transmission Type: Automatic Transmission
• Fitting Position: Left, before catalytic converter, Right
• Lambda Sensor: Regulating Probe
• Block Separation:
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO