• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fitting Position: Rear Axle Lower, outer
• Fabrication Number: ZTT-HY-534A

• Fitting Position: Rear Axle
• Fabrication Number: ZTT-HY-536D
• Manufacturer: NTY

• Fitting Position: Front Axle, Front, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Length [mm]: 32
• Width [mm]: 32
• Thickness [mm]: 35
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 32.2
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Lower, Rear, Rear Axle Right
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Diameter 4 [mm]: 17
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 16
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower Front Axle
• Fabrication Number: ZTP-HY-551A

• Fitting Position: Rear Axle Lower, inner, Lower
• Height [mm]: 35
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.3
• Manufacturer: GSP

• Length [mm]: 32.2
• Width [mm]: 32.2
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 32.2
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Lower, Rear, Rear Axle Right
• Manufacturer: SWAG
• Name: SW 50 10 4274

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS, 98-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS, 98-
(kvaliteediklass: PJ)"

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 32
• Length [mm]: 35
• paired article number: 271509
• Weight [kg]: 0.11
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Upper

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 54
• Manufacturer: DELPHI
• Name: DE TD1708W

• Length [mm]: 59
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 44
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JAPKO

• Production date from: 20150123
• Production date to: 20190530
• Fitting Position: Lower Front Axle
• Weight [kg]: 0.193
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Production date to: 201706
• Fitting Position: Rear Axle Lower
• Name: Puks
• Manufacturer: MAX

• Production date from: 201501
• Production date to: 201702
• Fitting Position: Lower Front Axle
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 545513X000
• paired article number: 2256130
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: JAPKO

• Fitting Position: Rear Axle, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 32
• Inner Diameter [mm]: 12
• Height [mm]: 35
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Production date to: 201706
• Fitting Position: Rear Axle
• Weight [kg]: 0.122
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Packaging length [cm]: 3.6
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Fabrication Number: ZTP-KA-329A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Production date to: 201501
• Weight [kg]: 0.13
• Packaging length [cm]: 9.9
• Packaging width [cm]: 2.8
• Packaging height [cm]: 2.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: JAPANPARTS

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Length [mm]: 45
• Length 1 [mm]: 28
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 41
• Name: Puks
• Manufacturer: JPA

• Production date to: 201706
• Fitting Position: inner, Rear Axle
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Front Axle both sides, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Height [mm]: 54
• Name: ALT 88585AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date to: 201501
• Fitting Position: Rear
• Weight [kg]: 0.187
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 41
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Required quantity: 2
• Fitting Position: Rear Axle Lower, inner, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks
• Manufacturer: TED

• Production date to: 201501
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.142
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Packaging length [cm]: 3.9
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Weight [g]: 181
• Fitting Position: Rear Axle Upper
• Manufacturer: CTR

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear Axle
• Manufacturer: GSP

• Thickness [mm]: 38
• Inner Diameter [mm]: 14.4
• Outer Diameter [mm]: 38
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Lower, outer, Rear Axle Right
• Weight [kg]: 0.135
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, behind the axle
• Fabrication Number: ZTT-HY-544G
• Manufacturer: NTY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI TUCSON 04-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI TUCSON 04-
(kvaliteediklass: PJ)"

• Weight [g]: 416
• Fitting Position: Front Axle, Lower
• Length [mm]: 60
• Manufacturer: CTR

• Fitting Position: Front Axle, both sides
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear, Upper, inner, outer, Rear Axle Left, Rear Axle Right SVHC: No information available, please contact the manufacturer!

• Fitting Position: both sides, Front, Centre, Rear Axle, Lower
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 59
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Fitting Position: Front Axle both sides, Rear, Lower
• Manufacturer: ASHIKA

• Production date from: 23.01.2015
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Fitting Position: outer, Rear, Rear Axle both sides, inner, Lower
• Required quantity: 4
• paired article number: VKDS 935025
• Name: SK VKDS935025
• Manufacturer: SKF

• Fitting Position: Front Axle
• Length [mm]: 53.8
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.7
• Manufacturer: ASHIKA

• Length [mm]: 59
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Fitting Position: Front Axle both sides, Rear, Lower
• Manufacturer: JPA

Name: Puks - K„„ndmik HYUNDAI P. I20/I40/PICANTO/RIO III 08-

• Fitting Position: Rear, Left, Right, Lower, Front Axle
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 383
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 60
• Length [mm]: 29
• Overall Length [mm]: 66.23
• Name: IM 7182
• Manufacturer: ORIGINAL IMPERIUM

• Thickness [mm]: 44.6
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Shape: slotted
• Weight [kg]: 0.185
• Name: Puks
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 53.8
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.7
• Name: Puks
• Manufacturer: JPA

• Fitting Position: Rear, Lower Front Axle, both sides
• Manufacturer: TEDGUM
• Name: TG 00285298

• Construction Year to: 01.2015
• Thickness [mm]: 60
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 66
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.43
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 20150123
• Production date to: 20190530
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.388
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Packaging height [cm]: 7
• Manufacturer: FEBEST

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66.6
• Length [mm]: 60
• paired article number: 270849
• Weight [kg]: 0.44
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle both sides, Lower, Rear
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Height [mm]: 60
• Name: ALT 92957AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear, Lower, Rear Axle Left, Rear Axle Right
• Construction Year to: 04.2012
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 01.2015
• Thickness [mm]: 60
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 66
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.43
• Name: SW 90 10 4453
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 40.8
• Length [mm]: 44.5
• paired article number: 271675
• Weight [kg]: 0.18
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, inner, outer, Upper

• Production date to: 201706
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.364
• Packaging length [cm]: 7
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: both sides, Upper, Rear Axle
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 49.1
• Inner Diameter [mm]: 14
• Overall Length [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Name: Puks
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Construction Year to: 05.2012
• Height 1 [mm]: 69.9
• Height 2 [mm]: 50
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 49
• Manufacturer: KAVO

• Production date to: 201501
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.383
• Outer Diameter [mm]: 66
• Packaging length [cm]: 6.7
• Packaging width [cm]: 6.7
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Lower, outer
• Required quantity: 2
• Name: Puks - K„„ndmik KIA T. CEED 06- ZEW
• Manufacturer: TED

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle Lower
• Outer Diameter 1 [mm]: 44
• Inner Diameter 1 [mm]: 14
• Thickness 1 [mm]: 59
• Manufacturer: BGA

• Fitting Position: Rear Axle, Lower
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 44
• Thickness 1 [mm]: 59
• Manufacturer: DELPHI
• Name: DE TD1656W

• Fitting Position: Rear, Front Axle, both sides
• Model Year to: 2015
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle both sides, Lower, outer, Rear
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 44
• Height [mm]: 59
• Name: ALT 90357AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.32
• Name: DY 37-23682
• Manufacturer: DYS

• Length [mm]: 59
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 44
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JAPANPARTS

• Production date to: 22.01.2015
• Fitting Position: inner, Rear, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 66
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• Quantity per axle: 2
• Replace in pairs only:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.

• Production date from: 20110401
• Production date to: 20190529
• Fitting Position: Rear Axle, behind the axle
• Weight [kg]: 0.299
• Packaging length [cm]: 6
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 59
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 44
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik KIA T. CEED/CARNIVAL 06-
• Manufacturer: MEY

• Production date from: 10.04.2012
• Fitting Position: inner, Rear Axle Left, Rear Axle Right
• Height [mm]: 70
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 49
• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• Quantity per axle: 2
• replacement in pairs recommended:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

• Fitting Position: Rear Axle Right, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for trailing arm
• paired article number: TED84877
• Material: Rubber/Metal
• Required quantity: 1
• Manufacturer: TEDGUM_TD

• Production date to: 201501
• Fitting Position: Rear Axle Upper, Front, Right
• Weight [kg]: 0.709
• Inner Diameter [mm]: 14
• Packaging length [cm]: 12.5
• Packaging width [cm]: 7.6
• Packaging height [cm]: 7.6
• Manufacturer: FEBEST

• Production date to: 201501
• Fitting Position: Left, Rear Axle Upper, Front
• Weight [kg]: 0.71
• Inner Diameter [mm]: 14
• Packaging length [cm]: 12.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST