• Engine Code: D4EB
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• External Thread Size: 1/8"
• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.3
• Weight [kg]: 0.051
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: 1/8"
• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.3
• Weight [kg]: 0.051
• Name: SW 33 10 6813
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 3/8x18 NPT
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: D4EB
• Colour: black
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.195
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 3922038020
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: D4EB
• Colour: black
• Switch Pressure [bar]: 0.3
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: Olisurvellitus
• Manufacturer: MAX

• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-CH-005
• Manufacturer: NTY

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: 3/8" x 18 NPTF
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor, Active sensor
• Manufacturer: KAMOKA

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x27 NPTF
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Thread Size: 1/8x28h'' BSP
• Housing Colour: black
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: FAE

• Spanner Size: 19 mm
• Number of pins: 3
• Connecting thread: 3/8'' x 18 NPTF
• Manufacturer: ERA

Manufacturer: ASHIKA

• Construction Year from: 09.2006
• Thread Size: 3/8x18 NPTF
• Number of pins: 3
• Weight [kg]: 0.043
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Fabrication Number: ECP-HY-015
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 3
• Thread Size: R3/8
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Engine Code: D4EB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year from: 09.2006
• Cable Length [mm]: 535
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: D4EB
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.2
• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

Manufacturer: FAST

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. HYUNDAI SANTA FE 2,2CRDI 05-

• Cable Length [mm]: 400
• Alternatively:
• Number of pins: 3
• Resistor [Ohm]: 900
• Alternative Repair Kit: 550408
• Fitting Depth [mm]: 36.5
• Manufacturer: ERA

• for OE number: 93840-2E010
• Number of pins: 2
• Fitting Position: Footwell
• Weight [kg]: 0.001
• Supplementary Article/Info 2: with cable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 535
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Engine Code: D4EB
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: D4EB
• Length [mm]: 615
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Construction Year to: 09.2009
• Engine Code: D4-EB
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 09.2009
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Housing Type: with housing
• Fabrication Number: EPP-HY-503
• Manufacturer: NTY

• Construction Year to: 11.2009
• Manufacturer: BOSCH

• Construction Year to: 11.2009
• Weight [kg]: 0.29
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• for OE number: 28164-27800
• Manufacturer: KAMOKA

• Fabrication Number: ESL-HY-507
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI
• Lisainfo: 30354 NRF
• Additional information: 30354 NRF

• for article number: 86239E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Name: DE ES21318-12B1
• Manufacturer: DELPHI

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10391-12B1

• Engine Code: D4EB
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.393
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: D4EB
• Construction Year from: 09.2006
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 800
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: before catalytic converter
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Engine Code: D4EB
• for OE number: 1 701 766
• Connector Shape: D Shape
• Number of pins: 6
• Socket colour: black
• Thread Size: M18 x 1,5
• Weight [kg]: 0.134
• Number of circuits: 5
• Conductor Number: 5
• Length [mm]: 270
• Overall Length [mm]: 410
• Exhaust System: before catalytic converter
• Cable Length [mm]: 270
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Mounting Type: Bolted
• Number of pins: 5
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009149201
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 11.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 400
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: D4EB
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.376
• Manufacturer: EPS

• Construction Year to: 11.2009
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS