• Fitting Position: Rear Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-HD-024A

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, inner
• Height [mm]: 44
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 40.1
• Manufacturer: GSP

• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,09
• Name: DY 37-26105
• Manufacturer: DYS

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Diameter 4 [mm]: 14
• Installatsiooni pool: Tagasild
• Siseläbimõõt [mm]: 16
• Manufacturer: ACKOJA

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Fabrication Number: ZTP-KA-330G
• Manufacturer: NTY

Fitting Position: Front Axle, inner, behind the axle, Left, Right, Lower, in front of axle

• Fitting Position: Left
• for OE number: 54551-2S000
• Manufacturer: GSP

• Fitting Position: Rear Axle, inner
• Length [mm]: 43
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 34
• Manufacturer: ASHIKA

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Height [mm]: 55
• Height 1 [mm]: 54.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Outer Diameter 1 [mm]: 44.5
• Inner Diameter 1 [mm]: 12.3
• Manufacturer: GSP

• Installatsiooni pool: Tagasild, sees
• Pikkus (mm): 43
• Siseläbimõõt [mm]: 14,5
• Välisläbimõõt [mm]: 34
• Manufacturer: JAPKO

• Fitting Position: Rear Axle, inner
• Length [mm]: 43
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 34
• Name: Puks - K„„ndmik KIA T. TUSCON/SPORTAGE 04-
• Manufacturer: JPA

• Fitting Position: Rear Axle, inner, outer, Left, Right, Upper
• Fabrication Number: ZTT-KA-337A
• Manufacturer: NTY

• Installatsiooni pool: Esisild, Tagasild
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 32
• Kõrgus (mm): 35
• Name: ALT 91242AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower, Lower Front Axle
• for OE number: 54551-1D000
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 42
• Inner Diameter [mm]: 14
• Name: Puks
• Manufacturer: MAX

• pikkus üle kõige (mm): 44,5
• Siseläbimõõt [mm]: 14,1
• Välisläbimõõt [mm]: 40,1
• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Tagasild all
• Manufacturer: JAPKO

• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,1
• Name: DY 37-26872
• Manufacturer: DYS

• Installatsiooni pool: esisild vasakul, esisild paremal, all, taga
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 60
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 70
• Manufacturer: MERTZ

• Fabrication Number: ZTP-KA-340B

Fitting Position: Front Axle, inner, behind the axle, Left, Right, Lower

• Production date to: 201505
• Weight [kg]: 0.13
• Packaging length [cm]: 9.9
• Packaging width [cm]: 2.8
• Packaging height [cm]: 2.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Front, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Production date from: 201504
• Fitting Position: inner, Rear Axle
• Name: Puks
• Manufacturer: MAX

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Required quantity: 2
• Fitting Position: Rear Axle Lower, inner, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks
• Manufacturer: TED

• Production date to: 201505
• Fitting Position: Rear Axle
• Weight [kg]: 0.191
• Packaging length [cm]: 4.8
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Production date to: 201505
• Fitting Position: Rear, Lower Front Axle, Front
• Weight [kg]: 0.22
• Packaging length [cm]: 6
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, both sides, Upper, Front, inner, outer
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Name: Puks
• Manufacturer: TED

• Fitting Position: Rear Axle Lower, inner, Rear, outer, both sides
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Required quantity: 4
• Name: Puks
• Manufacturer: TED

• Overall Length [mm]: 44.5
• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 40.1
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle Lower
• Manufacturer: JPA

Name: Puks - K„„ndmik HYUNDAI T. IX35/TUSCON/SORENTO/SPORTAGE 05- !!!POPRZECZNY!!!

• Fitting Position: Lower
• for OE number: 54584-2S000
• Manufacturer: GSP

• Thickness [mm]: 34
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 33.7
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, inner, Rear, Rear Axle Right
• Weight [kg]: 0.123
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 201505
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.199
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Name: Puks
• Manufacturer: MAX

• Installatsiooni pool: esisild mõlemapoolselt, ees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 38
• Kõrgus (mm): 55
• Name: ALT 90645AL
• Manufacturer: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild mõlemapoolselt, all, väljas
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 38
• Kõrgus (mm): 38
• Name: ALT 95609AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: inner, Rear Axle Left, Rear Axle Right, Lower
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Fabrication Number: ZTT-KA-329

• Thickness [mm]: 60.3
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 70.3
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.43
• Name:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Vehicle Identification Number (VIN): KMH**************, TMA**************
• Block Separation:
• Thickness [mm]: 45
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 40.3
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper, Rear
• Weight [kg]: 0.147
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): KMH**************, TMA**************
• Block Separation:
• Thickness [mm]: 60
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: Lower, inner, Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.251
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 60
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.43
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kaal (kg): 0,19
• Installatsiooni pool: esisild mõlemapoolselt, all, ees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,2
• Välisläbimõõt [mm]: 38,5
• Pikkus (mm): 54
• Manufacturer: RTS

• Outer Diameter 1 [mm]: 38
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 55
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, Lower Front Axle

• Thickness [mm]: 60.3
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 70.3
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.43
• Manufacturer: SWAG
• Name: SW 90 10 1933

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 201505
• Fitting Position: inner, Rear
• Weight [kg]: 0.438
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Production date to: 201505
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.3
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 46
• Packaging length [cm]: 6
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Installatsiooni pool: Esisild, all, taga
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 70
• Kõrgus (mm): 60
• Name: ALT 90646AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear, Upper, inner, outer, Rear Axle, both sides
• not for vehicle production country: Czech Republic, Slovakia
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, inner, behind the axle, Lower
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD1379W

• Production date to: 201505
• Fitting Position: Rear Axle
• Weight [kg]: 0.259
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 42
• Packaging length [cm]: 6
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN): KMH**************, TMA**************
• Block Separation:
• Length [mm]: 60
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 45.8
• Material: Rubber/Metal
• Weight [kg]: 0.264
• Name: Puks
• Manufacturer: FEB

Fitting Position: outer, Rear, Rear Axle Left, Lower, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Rear, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Production date to: 201505
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.364
• Packaging length [cm]: 7
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, both sides, Rear, Lower
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Kaal (kg): 0,43
• Installatsiooni pool: esisild mõlemapoolselt, all, taga
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 14,2
• Välisläbimõõt [mm]: 70,3
• Pikkus (mm): 60
• Manufacturer: RTS

• Fitting Position: Rear Axle, outer, in front of axle, Right, Lower
• Fabrication Number: ZTT-KA-337D
• Manufacturer: NTY

• Fitting Position: Rear Axle, outer, in front of axle, Left, Lower
• Fabrication Number: ZTT-KA-337C
• Manufacturer: NTY

• Production date to: 201505
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.461
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Packaging length [cm]: 7.1
• Packaging width [cm]: 7.1
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Fitting Position: inner, behind the axle, Front Axle, Lower
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Inner Diameter [mm]: 14.3
• Outer Diameter [mm]: 70
• Height [mm]: 60
• Mounting Type: Rubber-Metal Mount
• Name: Puks
• Manufacturer: TRI

• Fitting Position: Rear Axle Upper, Front
• Name: Puks
• Manufacturer: MAX

• Vehicle Identification Number (VIN): KMH
• Fitting Position: Rear Axle Right
• Mounting bores distance [mm]: 97
• Width [mm]: 37
• Diameter [mm]: 83
• Name: Puks - K„„ndmik HYUNDAI T. IX35 10- PR
• Manufacturer: JPA

• Vehicle Identification Number (VIN): KMH
• Installatsiooni pool: Tagasild vasakul
• Kinnitusaukude vahe (mm): 97
• Laius (mm): 37
• Läbimõõt [mm]: 83
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN): KMH
• Installatsiooni pool: Tagasild paremal
• Kinnitusaukude vahe (mm): 97
• Laius (mm): 37
• Läbimõõt [mm]: 83
• Manufacturer: JAPKO

• Production date from: 201505
• Fitting Position: Centre, Rear Axle Lower
• Weight [kg]: 0.23
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN): KMH
• Fitting Position: Rear Axle Left
• Mounting bores distance [mm]: 97
• Width [mm]: 37
• Diameter [mm]: 83
• Name: Puks - K„„ndmik HYUNDAI T. IX35 10- LE
• Manufacturer: JPA

• Vehicle Identification Number (VIN): KMH**************, TMA**************
• Block Separation:
• Thickness [mm]: 125
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Rear Axle Right, Front
• Weight [kg]: 0.85
• Name: Kinnitus,sillatala
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): KMH**************, TMA**************
• Block Separation:
• Thickness [mm]: 125
• Inner Diameter [mm]: 13.2
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Front
• Weight [kg]: 0.85
• Name: Kinnitus,sillatala
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Upper
• Weight [kg]: 0.931
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.4
• Packaging height [cm]: 8.4
• Manufacturer: FEBEST