Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Housing Colour: black
- Spanner Size: 19
- Manufacturer: KAMOKA
- Engine Code: D4FD
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
-
Vehicle Equipment: for vehicles without start-
stop function -
External Thread Size: 1/
8" - Spanner Size: 24
- Number of connectors: 1
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.051
- Name: SW 33 10 6813
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Equipment: for vehicles without start-
stop function -
External Thread Size: 1/
8" - Spanner Size: 24
- Number of connectors: 1
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.051
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: 3/
8x18 NPT - Manufacturer: VERNET
- Engine Code: D4FD
- Colour: black
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Manufacturer: FACET
- Engine Code: D4FD
- Colour: black
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: EP 1.800.195
- Manufacturer: EPS
- Engine Code: D4FD
- Colour: black
- Switch Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: Olisurvellitus
- Manufacturer: MAX
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 3
- Socket colour: black
- Spanner Size: 19
-
Thread Size: 3/
8 - for OE number: 3922038020
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Colour: black
- Number of pins: 3
-
Name: ANDUR,
KTUSETEMPERATUUR - Manufacturer: MAX
- Connector Shape: round
- Operating Mode: Hydraulic
-
Thread Size: 1/
8" x 28 BSPT - Number of pins: 1
- Shifting Points [bar]: 0.3
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 3
- Colour: black
- Weight [kg]: 0.05
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: 1/
8x28h'' BSP - Housing Colour: black
- Number of pins: 1
- Pressure [bar]: 0.3
- Manufacturer: FAE ELEKTRYKA
- Number of pins: 1
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Version: AM
- Manufacturer: METZGER
- Sensor Type: Passive sensor
- for OE number: 9118368
- Manufacturer: KAMOKA
- Sensor Type: Hall Sensor
- Voltage [V]: 12
- Supplementary Article/Info 2: without cable
- Fitting Position: Exhaust Side
-
Fabrication Number: ECP-
HY- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 3
- Colour: black
- Weight [kg]: 0.05
- Name: SW 33 10 6727
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
-
Thread Size: 3/
8" x 18 NPTF - Number of pins: 3
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 3
- Colour: black
- Weight [kg]: 0.05
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Switch Pressure [bar]: 0.3
-
Thread Size: 1/
8x27 NPTF -
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
- Spanner Size: 19 mm
- Number of pins: 3
-
Connecting thread: 3/
8'' x 18 NPTF - Manufacturer: ERA
- Sensor Type: Hall Sensor
- Number of pins: 3
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Length [mm]: 79
- Cable Length [mm]: 340
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Connector Shape: oval
-
Fabrication Number: ECP-
KA- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing Colour: black
- Number of pins: 3
-
Thread Size: R3/
8 - Spanner Size: 19
- Manufacturer: DELPHI ELEKTRONIKA
Manufacturer: ASHIKA
- Engine Code: D4FD
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Thread Size: M10x1,
25 - Spanner Size: 14
- Operating Mode: Mechanical
- Manufacturer: FACET
- Engine Code: D4FD
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Thread Size: M10x1,
25 - Spanner Size: 14
- Operating Mode: Mechanical
-
Name: LLITI,
SIDURDAMINE (GRA) - Manufacturer: EPS
- Engine Code: D4FD
-
Thread Size: 3/
8 GAS - Spanner Size: 19
- Manufacturer: FACET
- Engine Code: D4FD
-
Thread Size: 3/
8 GAS - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BRM
Name: CZUJNIK POO½ENIA WAKA ROZRZ. KIA CARENS 1,7CRDI 13-
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Manufacturer: MEAT&DORIA
- Pressure [bar]: 0.3
- Combi Switch Function: Normally Open Contact
-
Thread Size: 1/
8GAS - Spanner Size: 24
- Number of pins: 1
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Cable Length [mm]: 275
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: DLP
Manufacturer: MAGNETI MARELLI
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX
Manufacturer: MAGNETI MARELLI
- Number of pins: 3
- Mounting Type: mounting
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PT009309621
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Connector Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: D4FD
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Thread Size: M10x1,
25 - Spanner Size: 14
- Operating Mode: Mechanical
- Manufacturer: FACET
- Height [mm]: 24
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Engine Code: D4FD
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Thread Size: M10x1,
25 - Spanner Size: 14
- Operating Mode: Mechanical
-
Name: LLITI,
SIDURDAMINE (GRA) - Manufacturer: EPS
-
for OE number: 93840-
2E010 - Number of pins: 2
- Fitting Position: Footwell
- Weight [kg]: 0.001
- Supplementary Article/Info 2: with cable
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Footwell,
Upper - Number of pins: 2
- Housing Colour: black
- Transmission Type: Manual Transmission
- Supplementary Article/Info 2: without cable
- Manufacturer: METZGER
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: DLP
- Supplementary Article/Info 2: with cable
- Length [mm]: 340
- Height [mm]: 24.2
- Resistor [Ohm]: 900
- Number of connectors: 3
- Manufacturer: VERNET
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 24
- Manufacturer: ERA
- Engine Code: D4FD
- Manufacturer: FACET
- Sensor Type: Hall Sensor
- Number of pins: 3
- Housing Colour: black
- Supplementary Article/Info 2: without cable
- Manufacturer: FAE
- Number of connectors: 3
- Cable Length [mm]: 280
- Weight [kg]: 0.062
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: D4FD
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
- Number of connectors: 3
- Cable Length [mm]: 280
- Weight [kg]: 0.062
-
Name: ANDUR,
VNTVOLL - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: D4FD
- Length [mm]: 340
- Manufacturer: FACET
- Engine Code: D4FD
- Length [mm]: 340
- Name: EP 1.953.753
- Manufacturer: EPS
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 900
- Manufacturer: VALEO
- Construction Year to: 12.2018
- Manufacturer: BOSCH
- Number of pins: 5
- Housing material: Plastic
- Manufacturer: KAMOKA
- Number of pins: 5
- Plug Type: Male
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
- Lambda Sensor: Lambda Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV411
- Construction Year from: 07.2016
- Construction Year to: 02.2017
- Length [mm]: 450
- Number of circuits: 5
- Conductor Number: 5
- Cable Length [mm]: 450
- Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM177
- Engine Code: D4FD
- Construction Year from: 07.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 400
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Engine Code: D4FD
- Construction Year from: 07.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 400
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.394
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: D4FD
- Construction Year to: 06.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 350
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Engine Code: D4FD
- Construction Year to: 06.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 350
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.389
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Fitting Position: before catalytic converter
-
Lambda Sensor: Regulating Probe,
Heated - Model Year to: 2016
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Name: SW 33 10 4087
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 360
- Manufacturer: DELPHI ELEKTRONIKA
- Engine Code: D4FD
- Required quantity: 1
- Housing Type: with housing
- Length [mm]: 96
- Inner Diameter [mm]: 70
- Outer Diameter [mm]: 70
- Name: OHUHULGAMOOTJA
- Manufacturer: EPS
- Quantity: 1
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Additional information: DE AF10395-
12B1 -
Lisainfo: DE AF10395-
12B1
- Construction Year from: 07.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Lambda Sensor: Regulating Probe
- Cable Length [mm]: 292
- Supplementary Article/Supplementary Info: with attachment material
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Fitting Position: Front
- Number of connectors: 5
- Manufacturer: VERNET
- Construction Year to: 06.2016
- Fitting Position: before catalytic converter
- Required quantity: 1
- Lambda Sensor: Broadband lambda sensor
- Cable Length [mm]: 400
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166801
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: Ohumassimootja
- Manufacturer: BRM
- Additional information: BRE30327
- Lisainfo: BRE30327
- Construction Year from: 09.2015
- Construction Year to: 12.2018
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 5
- Manufacturer: BOSCH
- Lambda Sensor: Lambda Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Manufacturer: SKV GERMANY
- Name: CE 09SKV915
- Construction Year to: 06.2016
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 360
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 07.2016
- Construction Year to: 02.2017
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 450
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 5
- Suction pipe connector diameter [mm]: 70
- Assy./disassy. by qualified personnel required!:
- Name: OHUMASSIMOOTJA
- Manufacturer: HEL
SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 400
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 400
- Number of pins: 6
- Manufacturer: FAE
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: after catalytic converter
- Number of pins: 5
- Cable Length [mm]: 410
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Construction Year to: 03.2015
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 715
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 650
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Production date from: 13.08.2015
- Production date to: 01.12.2017
- Lambda Sensor: Diagnostic Probe
- Cable Length [mm]: 700
- Quality: IAM
- Manufacturer: METZGER
- Engine Code: D4FD
- Operating Mode: Electric
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- Lambda Sensor: Broadband lambda sensor
- Number of pins: 5
- Cable Length [mm]: 410
-
for OE number: 55204005,
55564978, 5801529676, 82 00 420 670 - Manufacturer: MEAT&DORIA
- Housing Type: with housing
- Number of pins: 5
- Inlet Ø [mm]: 70
- Outlet Ø [mm]: 70
- Manufacturer: ERA
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring