• Engine Code: D4FB
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Thread Size: 3/8x18 NPT
• Manufacturer: VERNET

• Engine Code: D4FB
• Colour: black
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.195
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 3922038020
• Manufacturer: NRF

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: 3/8" x 18 NPTF
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spanner Size: 19 mm
• Number of pins: 3
• Connecting thread: 3/8'' x 18 NPTF
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Fitting Position: Exhaust Side
• Fabrication Number: ECP-HY-001
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 3
• Thread Size: R3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10326

• Engine Code: D4FB
• Vehicle Equipment: for vehicles without electric parking brake
• Thread Size: M10x1,25
• Spanner Size: 14
• Operating Mode: Mechanical
• Name: EP 1.810.289
• Manufacturer: EPS

• Engine Code: D4FB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: EP 1.830.367
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Fabrication Number: ECP-HY-024

• Number of pins: 3
• Mounting Type: mounting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309621
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• for OE number: 93840-2E010
• Number of pins: 2
• Fitting Position: Footwell
• Weight [kg]: 0.001
• Supplementary Article/Info 2: with cable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: D4FB
• Vehicle Equipment: for vehicles with electric parking brake
• Thread Size: M10x1,25
• Spanner Size: 14
• Operating Mode: Mechanical
• Name: EP 1.810.302
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11215

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with holder
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Engine Code: D4FB
• Name: EP 1.953.556
• Manufacturer: EPS

• Number of pins: 5
• Housing material: Plastic
• Manufacturer: KAMOKA

• Number of pins: 5
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Fabrication Number: ESL-HY-513
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: Front, before catalytic converter, after catalytic converter

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor, Heated
• Emission Standard: Euro 6
• Fitting Position: after catalytic converter
• Cable Length [mm]: 650
• Manufacturer: DELPHI

• Construction Year from: 12.2015
• Construction Year to: 06.2017
• Conductor Number: 5
• Length [mm]: 450
• Number of circuits: 5
• Cable Length [mm]: 450
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM177

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV411

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: D4FB
• Construction Year from: 07.2017
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.394
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: D4FB
• Construction Year to: 11.2015
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 11.2015
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter

• Engine Code: D4FB
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.372
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI
• Additional information: BRE30327
• Lisainfo: BRE30327

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Construction Year to: 11.2015
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 360
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0281004093

• Mounting Type: Bolted
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009149191
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Production date to: 15.08.2017
• Lambda Sensor: Diagnostic Probe
• Cable Length [mm]: 700
• Quality: IAM
• Manufacturer: METZGER

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005, 55564978, 5801529676, 82 00 420 670
• Manufacturer: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 5
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA