• Construction Year to: 06.2009
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 06.2009
• Fabrication Number: ESL-HY-508
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year to: 06.2009
• Fabrication Number: ESL-HY-509
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Cable Length [mm]: 305
• Conductor Number: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA

• Cable Length [mm]: 630
• Conductor Number: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA

• Cable Length [mm]: 630
• Conductor Number: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV119

• Construction Year from: 02.2008
• Construction Year to: 08.2009
• Oxygen Sensor: Regulating Probe, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 405
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe
• Emission Standard: Euro 5
• Number of connectors: 4
• Length [mm]: 700
• Manufacturer: VERNET

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV432

• Construction Year from: 02.2008
• Oxygen Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW), for vehicles with mechanical accelerator pedal Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 07.2009
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: not for dusty operating conditions
• Cable Length [mm]: 400
• Manufacturer: DELPHI ELEKTRONIKA

• Length [mm]: 700
• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 700
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe, Heated
• Conductor Number: 4
• Length [mm]: 350
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 350
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 700
• Manufacturer: FAE ELEKTRYKA

• Oxygen Sensor: Oxygen Sensor
• Thread Size: M18x1,5
• Overall Length [mm]: 500
• Cable Length [mm]: 450
• Number of pins: 4
• Manufacturer: ERA

• Length [mm]: 420
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 420
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Manufacturer: FAE ELEKTRYKA

• Construction Year from: 09.2009
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 572
• Weight [kg]: 0.093
• Name: SW 33 10 6799
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Oxygen Sensor: Heated
• Cable Length [mm]: 352
• Number of circuits: 4
• Total Length [mm]: 380
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 703
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Lisainfo: ES20519-12B1
• Additional information: ES20519-12B1

• Construction Year from: 09.2009, 02.2008
• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW), for vehicles with mechanical accelerator pedal

• Construction Year to: 07.2009
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: G4FC
• Fitting Position: after catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: G4FC
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Cable Length [mm]: 630
• Conductor Number: 4
• Oxygen Sensor: Regulating Probe
• Name: LAMBDA ANDUR
• Manufacturer: JPA

• Required quantity: 1
• Emission Standard: Euro 5
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Name: VA 368015
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: G4FC
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Cable Length [mm]: 720
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: G4FC
• Fitting Position: before catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 08.2009
• Construction Year to: 12.2011
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Manufacturer: VALEO

• Construction Year from: 09.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 630
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW)

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Construction Year from: 09.2009
• Length [mm]: 600
• Manufacturer: FAE

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW)

• Construction Year to: 07.2009
• Exhaust System: for pre-catalytic converter
• for OE number: 3921002900
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-2065
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor

• Required quantity: 1
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Manufacturer: VALEO
• Name: VA 368017

Oxygen Sensor: Regulating Probe, Planar probe, Thread pre-greased, Heated

• Construction Year from: 02.2008
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Equipment: for vehicles with mechanical accelerator pedal
• Number of circuits: 4
• Overall Length [mm]: 675
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 02.2008
• Oxygen Sensor: Regulating Probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 380
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358103551

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2009
• Oxygen Sensor: Regulating Probe, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 655
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103561
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.