• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Thread Size: 3/8"x18 NPTF
• Spanner Size: 19 mm
• for OE number: 39220 38030
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Anduritüüp: Hallsensor
• Pinge [V]: 12
• Piirangutega toode/piirangu info 2: ilma kaablita
• Installatsiooni pool: Väljalaskepool
• Seerianumber: ECP-HY-001
• Manufacturer: NTY

• OE-numbri jaoks: 3 930 084 400
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos integreeritud õhutemp.anduriga
• Surve alates [kPA]: 25
• Surve kuni [kPA]: 95
• Seerianumber: ECM-HY-502
• Manufacturer: NTY

• Engine Code: D4FB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. KIA CARENS 1,7CRDI 13-

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 3
• Kaal (kg): 0,04
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: D4FB
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MAX

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Manufacturer: ERA

• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Installatsiooni pool: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Ühenduste arv: 2
• Seerianumber: ECS-HY-000
• Manufacturer: NTY

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Installatsiooni pool: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV802

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Construction Year to: 12.2011
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Engine Code: D4FB
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of connectors: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Construction Year to: 03.2011
• Korpusetüüp: koos korpusega
• Seerianumber: EPP-KA-301
• Manufacturer: NTY

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• valikuliselt:
• Pistikkontaktide arv: 4
• alternatiivne remondikomplekt: 551110
• Manufacturer: ERA

• Construction Year from: 10.2009
• OE-numbri jaoks: 22771 1AT0A, 39210 2A800
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Kaal (kg): 0,05
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 2
• Kinnitusaukude hulk: 1
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

• Engine Code: D4FB
• Pressure from [kPA]: 18
• Pressure to [kPA]: 300
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Seerianumber: EFP-HY-001
• Manufacturer: NTY
• Name: NTY EFP-HY-001

• Number of pins: 4
• Pressure from [kPA]: 34
• Manufacturer: DELPHI

• Pinge [V]: 12
• Pikkus (mm): 96
• Pistikkontaktide arv: 5
• Seerianumber: EPP-HY-508
• Manufacturer: NTY

• Number of pins: 5
• Housing material: Plastic
• Manufacturer: KAMOKA

• Seerianumber: EGT-HY-000
• Kaablipikkus (mm): 210
• Manufacturer: NTY

• Installatsiooni pool: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Construction Year to: 03.2011
• Pistikkontaktide arv: 5
• Pistikute teostus: Male
• Pinge [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 4
• Pressure from [kPA]: 25
• Pressure to [kPA]: 95
• Manufacturer: FAE

• Engine Code: D4FB
• Number of pins: 2
• Overall Length [mm]: 340
• Connector Shape: oval
• for OE number: 39220 27450
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAX

Manufacturer: ERA

• Construction Year from: 10.2009
• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 2
• for OE number: 39210 2A800, 22771 1AT0A
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Lambda andur: Sond, Diagnoosisond, Keere eelmääritud
• Installatsiooni pool: ees, katalüsaatori ees, pärast katalüsaatorit
• Seerianumber: ESL-HY-513
• Manufacturer: NTY

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Colour: black
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Installatsiooni pool: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Construction Year to: 07.2009
• Engine Code: D4FB
• Exhaust System: before catalytic converter
• Pinge [V]: 12
• Kaablipikkus (mm): 340
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 30SKV241
• Manufacturer: ESEN SKV

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Construction Year from: 09.2008
• Transmission Type: 6-Speed Manual Transmission
• Pinge [V]: 12
• Kaablipikkus (mm): 160
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,07
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 30SKV247
• Manufacturer: ESEN SKV

• Fitting Position: Exhaust Manifold
• Production date from: 13.07.2009
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Spanner Size: 14
• Thread Pitch [mm]: 1.25
• Thread Size: M 12
• Overall Length [mm]: 290
• Cable Length [mm]: 160
• Supplementary Article/Info 2: with cable
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: JAPKO

• Number of pins: 4
• Weight [kg]: 0.023
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before soot particulate filter
• Production date from: 13.07.2009
• Kuju: otse
• Pistikukatte kuju: ristkülik
• Kaablipikkus (mm): 255
• Pistiku värv: must
• Pistikkontaktide arv: 2
• Manufacturer: METZGER

• Fitting Position: Charge Air Cooler
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 2
• Surve alates (Pa): 25 000
• Surve (Pa) kuni: 95 000
• Manufacturer: METZGER

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Production date from: 01.09.2009
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Engine Code: D4FB
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 03.2011
• Block Separation:
• Construction Year from: 04.2011
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter

• Engine Code: D4FB
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: OHUHULGAMOOTJA
• Manufacturer: EPS

• Required quantity: 1
• Construction Year to: 03.2011
• Voltage [V]: 12
• Number of pins: 5
• Name: Ohumassimootja
• Manufacturer: BRM
• Additional information: BRE30327
• Lisainfo: BRE30327

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Vehicle Equipment: for vehicles without start-stop function
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Kaal (kg): 0,15
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tehniline informatsioon: Universal
• Manufacturer: SKV GERMANY

• Engine Code: D4FB
• Number of pins: 2
• Overall Length [mm]: 340
• Connector Shape: oval
• for OE number: 39220 27450
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MD

• Construction Year from: 03.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 360
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 715
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year to: 03.2011
• Mounting Type: Bolted
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 10
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Number of pins: 6
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: black
• for OE number: 39220-27450
• Weight [kg]: 0.06
• Shape: straight
• Connector Shape: oval
• Number of pins: 2
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 255
• Sensor Type: NTC Sensor
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2009
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Kaablipikkus (mm): 220
• Versioon: AM
• Manufacturer: METZGER

Installatsiooni pool: pärast heitgaaside turbokompressorit, katalüsaatori ees

• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HITACHI

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Kaablipikkus (mm): 160
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 29
• Manufacturer: ERA

• Engine Code: D4FB
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HITACHI

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005, 55564978, 5801529676, 82 00 420 670
• Manufacturer: MEAT&DORIA

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Sisend-Ø (mm): 70
• Väljalase-Ø (mm): 70
• Manufacturer: ERA

• Weight [kg]: 0.046
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without start-stop function
• Pistikkontaktide arv: 5
• Manufacturer: METZGER