• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Thread Size: 3/8"x18 NPTF
• Spanner Size: 19 mm
• for OE number: 39220 38030
• Manufacturer: MEAT&DORIA

• Fitting Position: Intake Side, Exhaust Side
• Sensor Type: Hall Sensor
• Connector Shape: oval
• Number of pins: 3
• Fabrication Number: ECP-KA-002
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring, without cable
• Fabrication Number: ECP-KA-005
• Manufacturer: NTY

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV503

• Fabrication Number: ECM-HY-500
• Manufacturer: NTY

• Colour: black
• Supplementary Article/Supplementary Info: with gaskets
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Length [mm]: 45
• Weight [kg]: 0.047
• Material: Plastic
• Warranty: 3 years warranty
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: G4FC
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ESS-HY-503
• Manufacturer: NTY

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: G4FC
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Name: Ohusurveandur,
• Manufacturer: MAX

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11216

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 318
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ESL-HY-509
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Fabrication Number: ESL-HY-508
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 120
• Measuring Range from [V]: 0.374
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Cable Length [mm]: 260
• Number of pins: 2
• Manufacturer: ERA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Connector Shape: oval
• Alternative Repair Kit: 550520
• Manufacturer: ERA

• Engine Code: G4FC
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring

• Check OE number:
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: G4FC
• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Cable Length [mm]: 280
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10205

• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year from: 03.2008
• Construction Year to: 07.2010
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Heated
• Name: MM OSM206
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: Front
• Exhaust System: before catalytic converter
• Number of connectors: 4
• Length [mm]: 700
• Manufacturer: VERNET

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.13
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV432

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW), for vehicles with mechanical accelerator pedal Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Diagnostic Probe, Heated
• Length [mm]: 350
• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 350
• Manufacturer: MAGNETI MARELLI

• Number of pins: 4
• Pressure from [kPA]: 14
• Manufacturer: DELPHI

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Name: DE ES21125-12B1
• Manufacturer: DELPHI

• Number of pins: 4
• Colour: black
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Engine Code: G4FC
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Output Voltage, from [V]: 0.374
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Length [mm]: 700
• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 700
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Lambda Sensor
• Thread Size: M18x1,5
• Overall Length [mm]: 500
• Cable Length [mm]: 450
• Number of pins: 4
• Manufacturer: ERA

• Engine Code: G4FC
• Number of pins: 2
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 470
• Number of pins: 4
• Manufacturer: ERA

• Engine Code: G4FC
• Length [mm]: 300
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Length [mm]: 420
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 420
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 09.2009
• Lambda Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 572
• Weight [kg]: 0.093
• Name: SW 33 10 6799
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Heated
• Cable Length [mm]: 352
• Number of circuits: 4
• Total Length [mm]: 380
• Manufacturer: ERA

• Block Separation:
• Cable Length [mm]: 703
• Name: DE ES20519-12B1
• Manufacturer: DELPHI
• Lisainfo: ES20519-12B1
• Additional information: ES20519-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2009
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 704
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

Manufacturer: BOSCH

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW), for vehicles with mechanical accelerator pedal

Manufacturer: MAGNETI MARELLI

• Engine Code: G4FC
• Fitting Position: after catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: G4FC
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: G4FC
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Cable Length [mm]: 720
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.345
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: G4FC
• Fitting Position: before catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 09.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 630
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW)

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 09.2009
• Fitting Position: after catalytic converter
• Length [mm]: 600
• Manufacturer: FAE

• Construction Year from: 03.2008
• Construction Year to: 07.2010
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.14
• Manufacturer: VALEO
• Name: VA 368017

• Construction Year from: 03.2008
• Construction Year to: 11.2009
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.09
• Name: VA 368037
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 07.2009
• Exhaust System: for pre-catalytic converter
• for OE number: 3921002900
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-2065
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 380
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103551
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2009
• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 655
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103561
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.