Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Number of pins: 2
- Manufacturer: OYODO
-
External Thread [mm]: M12x1,
5 - Spanner Size: 19 MM
- Manufacturer: OYODO
-
Thread Size: 1/
8x27 NPTF - Number of pins: 1
- Manufacturer: OYODO
- Colour Coding: green
-
Thread Size: M 12x1,
5 - Spanner Size: 19
- Connector Shape: oval
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 15326388
- Manufacturer: DELLO AUTOMEGA
- Engine Code: A15MF
- Thread Size: M12 x 1.5
- Number of pins: 2
- Manufacturer: KAVO PARTS
Manufacturer: FAE
- Cable Length [mm]: 22
- Number of pins: 1
-
Connecting thread: 1/
8'' x 27 NPT - Manufacturer: ERA
-
Thread Size: M12 x 1,
5 - Number of pins: 2
- Manufacturer: ERA
- Pressure [bar]: 0.5
-
Thread Size: M14x1,
5 - Spanner Size: 27 MM
- Manufacturer: JPN
-
Thread Size: M12x1,
5 - Colour: black
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Weight [kg]: 0.03
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: A15MF
- Housing Colour: black
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: white
- Manufacturer: FACET
- Engine Code: A15MF
- Housing Colour: black
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: white
- Name: EP 1.830.098
- Manufacturer: EPS
- Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S19
-
Thread Size: M12*1,
5 - Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: oval
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 55199579
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.026
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.026
- Supplementary Article/Info 2: with seal ring
- Name: SW 33 10 2242
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Housing Colour: black
- Number of pins: 2
-
Thread Size: M12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10254
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
700, 311 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: M12x1,
5 - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 3
- Weight [kg]: 0.058
- Manufacturer: BLUE PRINT ELEKTRYKA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 10.1996
-
Oxygen Sensor: Regulating Probe,
Finger probe, Unheated - Alternatively:
- Cable Length [mm]: 320
- Manufacturer: DELPHI
-
Name: DE ES10966-
12B1
- Oxygen Sensor: Regulating Probe
- Engine Code: A15MF
- Voltage [V]: 12
- Length [mm]: 320
- Guarantee: 3 years guarantee
- Number of circuits: 1
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV069
- Manufacturer: ESEN SKV
- Oxygen Sensor: Unheated
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Oxygen Sensor: Regulating Probe
- Number of circuits: 1
- Manufacturer: KAMOKA
- Conductor Number: 1
- Length [mm]: 370
- Number of circuits: 1
- Cable Length [mm]: 370
- Oxygen Sensor: Unheated
- Name: MM OSM005
- Manufacturer: MAGNETI MARELLI
- Cable Length [mm]: 330
- Conductor Number: 1
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO
- Oxygen Sensor: Unheated
- Length [mm]: 360
- Number of pins: 1
- Technical Information Number: Universal 77001
- Manufacturer: FAE
- Construction Year to: 10.1996
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 1
- Overall Length [mm]: 422
- Available as universal article as well, see article no.: 0258986501
-
Recommended change interval [km]: 100,
000 - Manufacturer: BOSCH
- Name: BS F00HL00311
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 300
- Number of pins: 1
- Weight [g]: 74
- Gross Weight [g]: 118
- Manufacturer: DENSO
Oxygen Sensor: Regulating Probe, Unheated, Finger probe, Oxygen Sensor
- Construction Year to: 10.1996
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 1
-
Recommended change interval [km]: 80,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986501
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 460
- Number of circuits: 1
- Manufacturer: VDO
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 13
-
Thread Size: 1/
8 NPT - for OE number: 93290234
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks