• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Manufacturer: OYODO

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 13
• Thread Size: 1/8 NPT
• for OE number: 93290234
• Manufacturer: NRF KLIMATYZACJA

Manufacturer: FAST

• Engine Code: T20SED
• Keermemõõt: M12 x 1.5
• Pistikkontaktide arv: 2
• Manufacturer: KAVO PARTS

• Engine Code: T20SED
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Manufacturer: FACET

• Number of pins: 2
• Socket colour: black
• Connector Shape: oval
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 96182634
• Manufacturer: MEAT & DORIA

• Engine Code: T20SED
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0225
• Additional information: 21-0225

• Pistikkontaktide arv: 2
• Manufacturer: OYODO

• Engine Code: T20SED
• Keermemõõt: 1/8-27NPT
• Võtmekaugus: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Keermemõõt: M12 x 1,5
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Engine Code: T20SED
• Pistikkontaktide arv: 2
• Manufacturer: KAVO PARTS

• OE-numbri jaoks: 12614970, 77 00 106 644
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 100
• Seerianumber: ECM-PL-004
• Manufacturer: NTY

• Number of pins: 2
• Colour: black
• Socket colour: blue
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• for OE number: 3934024755
• Manufacturer: MEAT&DORIA

Manufacturer: JPN

• Thread Size: M12x1,5
• Colour: black
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55199579
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• for OE number: 8-10456-515-0
• Cable Length [mm]: 840
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Engine Code: T20SED
• Sensor Type: NTC Sensor
• Thread Size: 1/8"X27 NPTF
• Number of pins: 1
• Thread Type: with tapered thread
• Manufacturer: MEYLE

• Engine Code: T20SED
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white
• Manufacturer: FACET

• Seerianumber: ECP-CH-026
• Manufacturer: NTY

• Engine Code: T20SED
• Housing Colour: black
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Vastab originaalosa värvile: valge
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Pistikkontaktide arv: 3
• Seerianumber: ESS-CH-001
• Manufacturer: NTY

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 1235547, 96418393
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Seerianumber: ECP-DW-001
• Manufacturer: NTY

• Installatsiooni pool: esisild paremal
• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: T20SED
• Manufacturer: FACET

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: T20SED
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Name: SW 33 10 2242
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: T20SED
• Mounting Type: Plugged
• Number of connectors: 2
• Weight [kg]: 0.012
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: T20SED
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL
• Manufacturer: BRM

• Number of pins: 3
• Connector Shape: rectangular
• Colour: grey
• Cable Length [mm]: 325
• for OE number: 96253545
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,700, 311
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107271

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 400
• for OE number: 6238370
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle Right
• pikkus üle kõige (mm): 460
• Pikkus (mm): 40
• Anduritüüp: passiivne andur
• Pistiku värv: valge
• Kaablipikkus (mm): 335
• paaris tootenumbrid: 30751
• Kaal (kg): 0,07
• Manufacturer: A.B.S.

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Manufacturer: BREMI

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. CHEVROLET CAPTIVA 2,4I 11-

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAG

Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 920
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Fitting Position: Front Axle Left
• Quantity: 1
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 550
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20214

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Quantity: 1
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 490
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253836

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 1
• Cable Length [mm]: 410
• Weight [kg]: 0.083
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• for OE number: 71739292
• Manufacturer: MEAT&DORIA

• Construction Year to: 06.2003
• Oxygen Sensor: Regulating Probe, Unheated
• Emission Standard: Euro 2
• Vehicle Identification Number (VIN) to: 642920
• Fitting Position: before catalytic converter
• Number of circuits: 1
• Overall Length [mm]: 422
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Oxygen Sensor: Regulating Probe
• Number of circuits: 1
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Quantity: 1
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 393
• Name: DE SS20287
• Manufacturer: DELPHI

• Engine Code: T20SED
• Sensor Type: Piezoelectric Sensor
• Number of pins: 3
• Manufacturer: MEY

Name: CZUJNIK SPALANIA STUKOWEGO DAEWOO LANOS, CHERVROLET AVEO 97-

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 1
• Cable Length [mm]: 410
• Weight [kg]: 0.083
• Name: SW 40 91 7536
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.525
• Measuring Range to [V]: 4.775
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Name: HE 6PU009121971
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: T20SED
• Length [mm]: 350
• Manufacturer: FACET

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 1
• Weight [g]: 74
• Gross Weight [g]: 118
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Unheated, Finger probe, Oxygen Sensor

• Engine Code: T20SED
• Pikkus (mm): 1 000
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: T20SED
• Pikkus (mm): 350
• Name: EP 1.957.052
• Manufacturer: EPS

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,13
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Engine Code: T20SED
• Fitting Position: Rear
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.171
• Socket colour: black
• Number of circuits: 4
• Connector Shape: oval
• Number of pins: 4
• Thread Size: M18 x 1,5
• for OE number: 25 312 192
• Cable Length [mm]: 750
• Length [mm]: 870
• Number of connectors: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Manufacturer: METZGER

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Construction Year to: 06.2003
• Length [mm]: 400
• Number of pins: 2
• Manufacturer: FAE

• Engine Code: T20SED
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.516
• Output Voltage, up to [V]: 4.775
• Manufacturer: FACET

• Engine Code: T20SED
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 100
• Väljundpinge alates [V]: 0,516
• Väljundpinge kuni [V]: 4,775
• Name: EP 1.993.011
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3