• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: OYODO

• Alternatively:
• Number of pins: 2
• Housing Colour: black
• Alternative Repair Kit: 550718
• Manufacturer: ERA

• Fitting Position: Intake Manifold
• Thread Size: M14x1.5
• Manufacturer: VERNET

• Fabrication Number: ECP-DW-003
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Manufacturer: NRF

• Outer Diameter [mm]: 1
• Number of connectors: 3
• Weight [kg]: 0.1
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.1
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168581
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Air Filter Housing
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Additional information: 253824 VALEO
• Lisainfo: 253824 VALEO

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: rectangular
• Alternative Repair Kit: 550405
• Manufacturer: ERA

• Construction Year from: 10.1999
• Oxygen Sensor: Regulating Probe, Unheated
• Vehicle Identification Number (VIN) from: 580669
• Number of circuits: 1
• Overall Length [mm]: 422
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 1
• Cable Length [mm]: 410
• Weight [kg]: 0.083
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe
• Number of circuits: 1
• Manufacturer: KAMOKA

• Engine Code: A16DMS
• Oxygen Sensor: Regulating Probe, Unheated
• Fitting Position: Front, before catalytic converter
• Number of circuits: 2
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Regulating Probe
• Number of circuits: 2
• Manufacturer: KAMOKA

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 1
• Cable Length [mm]: 410
• Weight [kg]: 0.083
• Name: SW 40 91 7536
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.5
• Measuring Range to [V]: 4.5
• Number of connectors: 3
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) to: 580669
• Manufacturer Restriction: Delphi
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.06
• for OE number: 62 38 927
• Name: SW 40 93 3629
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1999
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 580669
• Number of circuits: 1
• Overall Length [mm]: 422
• Available as universal article as well, see article no.: 0258986501
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: 580670
• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 270
• Socket colour: black
• Number of circuits: 4
• Connector Shape: angular
• Number of pins: 4
• Thread Size: M18 x 1,5
• for OE number: 96 253 546
• Length [mm]: 370
• Number of connectors: 2
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Pressure from [kPA]: 19
• Name: DE PS10222
• Manufacturer: DELPHI

• Fitting Position: Front
• Oxygen Sensor: Regulating Probe
• Length [mm]: 375
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 290
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 10.1999
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 580669
• Number of circuits: 1
• Recommended change interval [km]: 80,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1999
• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Alternatively:
• Cable Length [mm]: 375
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 280
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 10.1999
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1999
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 580670
• Number of circuits: 2
• Recommended change interval [km]: 100,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 4
• Cable Length [mm]: 250
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter