• for OE number: 13 62 2 242 184
• Spanner Size: 19
• Housing Colour: green
• Manufacturer: KAMOKA

• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

Manufacturer: FAST

• Number of pins: 2
• Socket colour: light blue
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 60800167
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Housing Colour: green
• Colour Coding: yellow
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 19
• Colour Coding: green
• Number of pins: 2
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Engine Code: AR 67106
• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: M14x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of connectors: 3
• Manufacturer: JPN

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 6081220
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Operating voltage [V]: 12
• Sensor Type: Slider
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Switch for throttle valve
• Additional information: Switch for throttle valve

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA104

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Name: SW 62 91 8991
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.1996
• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS10992-12B1

• Construction Year to: 10.1997
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 8945205010
• Manufacturer: MEAT & DORIA

• Engine Code: AR 67106
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Construction Year to: 10.1997
• Voltage [V]: 12
• Weight [kg]: 0.04
• Operating Mode: Electric
• Number of pins: 3
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV005
• Manufacturer: ESEN SKV

• Fitting Position: outer, inner
• for OE number: 40555010
• New Part:

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 405
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Rated Voltage [V]: 12
• Manufacturer: JPN

• Colour: black
• Manufacturer: METZGER
• Lisainfo: 0905071 METZGER
• Additional information: 0905071 METZGER

• Engine Code: AR 67106
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

for article number: 7.8117, 7.8119, 7.8120, 7.8121, 7.8122, 7.8142, 7.8149, 7.8150, 7.8158, 7.8193

• Engine Code: AR 67106
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.117, 1.880.119, 1.880.120, 1.880.121, 1.880.122, 1.880.142, 1.880.149, 1.880.150, 1.880.158, 1.880.193

• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Thread Size: M16 x 1,5
• Number of pins: 2
• Temperature range to [°C]: 120
• Manufacturer: ERA

• Switch Point [°C]: 120
• Weight [kg]: 0.052
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Construction Year to: 08.1997
• Spanner Size: 19
• Thread Size: 12x1.5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Name: VA 700022
• Manufacturer: VALEO

• Engine Code: AR 67106
• Warn Temperature [°C]: 120
• Thread Size: M16x1,5
• Spanner Size: 22
• for article number: 1.880.116, 1.880.156
• Name: EP 1.830.509
• Manufacturer: EPS

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,000
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 08.1997
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Sensor Type: Passive sensor
• Cable Length [mm]: 1,000
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Length [mm]: 360
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.08
• Alternative Repair Kit: 550113
• Manufacturer: ERA

• Colour: black
• Cable Length [mm]: 630
• Number of pins: 3
• Fitting Depth [mm]: 34
• Weight [kg]: 0.072
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Engine Code: AR 67106
• Length [mm]: 640
• Name: EP 1.953.155
• Manufacturer: EPS

• Engine Code: AR 67106
• Length [mm]: 450
• Name: EP 1.957.023
• Manufacturer: EPS

• Engine Code: AR 67106
• Construction Year to: 10.1997
• Oxygen Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Cable Length [mm]: 450
• Number of pins: 3
• Housing Colour: white
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Quality class: PJ
• Name: Air flow sensor

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Construction Year to: 10.1997
• Number of pins: 4
• Housing material: Plastic
• Manufacturer: KAMOKA

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year to: 10.1997
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,175
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV617

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Engine Code: AR 67106
• Length [mm]: 405
• Manufacturer: EPS

• Length [mm]: 420
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3