• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 9635978280
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2001

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"

• Transmission Type: Manual Transmission
• for OE number: 4571477
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,640
• Number of pins: 4
• Weight [g]: 110
• Gross Weight [g]: 143
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"

• for OE number: 9636777180
• Manufacturer: SASIC

• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: ECT-RE-000
• Manufacturer: NTY
• Name: NTY ECT-RE-000

• Number of pins: 2
• Socket colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 9636777180, 89422 02020
• Manufacturer: MEAT&DORIA

• for RPO number up to: 08827, 09278, 09274
• Block Separation:
• for RPO number from: 08828
• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW), for vehicles with mechanical accelerator pedal General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: RFN (EW10J4)
• Required quantity: 1
• Vehicle Equipment: for vehicles with e-throttle
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Fabrication Number: ECM-PE-001

• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• for OE number: 1920 AN
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: RFN (EW10J4)
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

• Fabrication Number: ECM-CT-012
• Manufacturer: NTY

• Fabrication Number: ESS-CT-001
• Manufacturer: NTY

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Suction Pipe
• for RPO number up to: 08827
• Block Separation:
• Vehicle Equipment: for vehicles with mechanical accelerator pedal
• for RPO number from: 08828
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Engine Code: RFN (EW10J4), EW10J4
• Required quantity: 1
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: FAE

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 105
• Measuring Range from [V]: 0.39
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA CITROEN BERLINGO 94-
• Manufacturer: BRM

• Number of pins: 2
• Connector Shape: rectangular
• for OE number: 5946 23, 55353316, 003 153 89 28, 6235703
• Manufacturer: MEAT&DORIA

Supplementary Article/Info 2: for mechanically actuated throttle valve, without cable

• Height [mm]: 20.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• for RPO number up to: 08827
• Block Separation:
• for RPO number from: 08828
• Number of connectors: 3
• Required quantity: 1
• Resistor [Ohm]: 35
• Colour: grey
• Sensor Type: Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Colour Coding: black
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: for mechanically actuated throttle valve, for throttle valve with electrical actuator, for camshaft, without cable General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: BOSCH

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Alternative Repair Kit: 550010
• Manufacturer: ERA

• Alternatively:
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 105
• Weight [kg]: 0.022
• Alternative Repair Kit: 550130
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Supplementary Article/Info 2: for mechanically actuated throttle valve
• Number of pins: 3
• Pressure from [kPA]: 23
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Supplementary Article/Info 2: for mechanically actuated throttle valve
• Length [mm]: 45
• Thickness [mm]: 18
• Inner Diameter [mm]: 8
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RFN (EW10J4), EW10J4
• Required quantity: 1
• Manufacturer Restriction: SAGEM
• Housing Colour: white
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• for article number: 87295E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 3
• Rotation Direction: Clockwise rotation
• Number of mounting bores: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: RFN (EW10J4)
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: EW10J4
• Diameter [mm]: 12
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 255602

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Manufacturer Restriction: Citroen, Peugeot, Renault
• Number of pins: 4
• Cable Length [mm]: 200
• Supplementary Article/Supplementary Info: with socket housing
• Supplementary Article/Info 2: with pipe
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 1.5
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• for OE number: 9639381480
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Lambda Sensor: Diagnostic Probe
• Length [mm]: 1,500
• Fabrication Number: ESL-CT-018
• Manufacturer: NTY

• Supplementary Article/Info 2: for throttle valve with electrical actuator
• Number of pins: 2
• Name: DE AS10174
• Manufacturer: DELPHI

• Engine Code: RFN (EW10J4), EW10J4
• Required quantity: 1
• Manufacturer Restriction: BOSCH
• Pressure from [kPA]: 20
• Pressure to [kPA]: 105
• Output Voltage, from [V]: 0.391
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.005
• Manufacturer: EPS

• for RPO number up to: 08827
• Block Separation:
• for RPO number from: 08828
• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.02
• Name: SW 62 93 1239
• Manufacturer: SWAG

Supplementary Article/Info 2: for mechanically actuated throttle valve, for throttle valve with electrical actuator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 1628HN
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with accelerator pedal sensor
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gaskets/seals
• Mounting Type: Bolted
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152671
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for RPO number up to: 08827
• Block Separation:
• for RPO number from: 08828
• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN
• Additional information: 31239 NRF
• Lisainfo: 31239 NRF

Supplementary Article/Info 2: for mechanically actuated throttle valve, for throttle valve with electrical actuator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: BOSCH

• Engine Code: RFN (EW10J4)
• Number of pins: 3
• Socket colour: grey
• Manufacturer: FAE

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Colour: black
• Manufacturer: FAE

• Cable Length [mm]: 1,235
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: for mechanically actuated throttle valve
• Number of pins: 2
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Planar probe
• Exhaust System: before catalytic converter
• Number of pins: 4
• Length [mm]: 610
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: RFN (EW10J4)
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 1,230
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: RFN (EW10J4)
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Manufacturer: ERA

• Engine Code: RFN (EW10J4)
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Supplementary Article/Info 2: for throttle valve with electrical actuator
• Number of pins: 3
• Pressure from [kPA]: 13
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Engine Code: RFN (EW10J4), EW10J4
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.789
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.056
• Manufacturer: EPS

• Number of pins: 3
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: RFN (EW10J4)
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Vehicle Equipment: for vehicles with accelerator pedal sensor
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.187
• Socket colour: blue
• Connector Shape: rectangular
• Number of pins: 4
• Thread Size: M18 x 1,5
• for OE number: 1628 HV
• Cable Length [mm]: 1,320
• Length [mm]: 1,490
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: EW10J4
• Voltage [V]: 12
• Length [mm]: 540
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS