Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Sensor Type: Inductive Sensor
- Length [mm]: 820
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Transmission Type: Manual Transmission
- Fitting Position: Front Axle both sides
- Width [mm]: 18
- Number of Teeth, ABS ring: 29
- Inner Diameter [mm]: 85.8
- Outer Diameter [mm]: 89.9
- Weight [kg]: 0.048
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Brake Type: Disc Brake
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
CT- 020 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
062 -
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of pins: 2
- Cable Length [mm]: 805
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
CT- 012 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Inner Diameter [mm]: 85.8
- Width [mm]: 18
- Outer Diameter [mm]: 89.9
- Number of Teeth, ABS ring: 29
- Manufacturer: TRISCAN
- Lisainfo: PSA
- Additional information: PSA
- Brake Type: Disc Brake
- Construction Year to: 08.2000
- Fitting Position: Front Axle
-
Sensor Type: Inductive Sensor,
Passive sensor -
Overall Length [mm]: 1,
015 - Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Brake Type: Drum Brake
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
CT- 013 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 2
- Cable Length [mm]: 959.5
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Fitting Position: Front Axle
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU358218001
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Front Axle
-
Resistor [Ohm]: 1,
700 -
Cable Length [mm]: 1,
015 - for OE number: 4545.7
- Number of pins: 2
- Number of mounting bores: 1
- Name: MM MWSS105
- Manufacturer: MAGNETI MARELLI
- Sensor Type: Passive sensor
- Number of pins: 2
- Cable Length [mm]: 962
-
Fitting Position: Front Axle Right,
Front Axle Left - Name: SE DS0075
- Manufacturer: AUTOFREN SEINSA
- Number of pins: 2
- Cable Length [mm]: 750
- Sensor Type: Passive sensor
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: AUTOFREN SEINSA
- Name: SE DS0114
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- Brake Type: Disc Brake
- Fitting Position: Front
- Length [mm]: 970
- Number of pins: 2
- Plug Type: Male
- Connector Shape: rectangular
- Voltage [V]: 12
- Weight [kg]: 0.16
- Colour: grey
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 06SKV096
- Manufacturer: ESEN SKV
- Fitting Position: Rear
- Length [mm]: 710
- Number of pins: 2
- Plug Type: Male
- Connector Shape: rectangular
- Voltage [V]: 12
- Weight [kg]: 0.14
- Colour: grey
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Fitting Position: Rear Axle
- Overall Length [mm]: 880
- Length [mm]: 42
- Sensor Type: Passive sensor
- Socket colour: grey
- Cable Length [mm]: 800
- paired article number: 30051
- Weight [kg]: 0.13
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
-
Overall Length [mm]: 1,
070 - Length [mm]: 30
- Sensor Type: Passive sensor
- Socket colour: grey
- Cable Length [mm]: 960
- paired article number: 30136
- Weight [kg]: 0.19
- Manufacturer: A.B.S.
- Number of pins: 2
- Cable Length [mm]: 800
- Sensor Type: Passive sensor
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Name: SE DS0138
- Manufacturer: AUTOFREN SEINSA
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Cable Length [mm]: 705
- Sensor Type: Passive sensor
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 765
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20179
- Fitting Position: Rear Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 865
- Manufacturer: DELPHI
- Name: DE SS20049
- Quality class: PJ
- Required quantity: 2
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
025 - Manufacturer: DELPHI
- Name: DE SS20170
- Fitting Position: Rear Axle
- Overall Length [mm]: 840
- Length [mm]: 30
- Sensor Type: Passive sensor
- Socket colour: grey
- Cable Length [mm]: 760
- paired article number: 30458
- Weight [kg]: 0.18
- Manufacturer: A.B.S.
-
Length [mm]: 1,
062 - Number of connectors: 2
- Colour: grey
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.13
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Left, Rear Axle - Cable Length [mm]: 885
- Name: SN ASB159.18
-
Manufacturer: NTN-
SNR
-
Fitting Position: Right,
Left, Rear Axle - Cable Length [mm]: 887
- Name: SN ASB166.04
-
Manufacturer: NTN-
SNR
- Construction Year to: 08.2000
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Block Separation:
- Construction Year from: 09.2000
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
-
Overall Length [mm]: 1,
015 -
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH
- Inner Diameter [mm]: 85.8
- Number of Teeth, ABS ring: 48
- Width [mm]: 18
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 89.9
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 85.8
- Width [mm]: 18
- Outer Diameter [mm]: 89.9
- Number of Teeth, ABS ring: 48
- Manufacturer: TRISCAN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks