• for OE number: 1628HR, 9635978280
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2001

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"

• for OE number: 9636777180
• Manufacturer: SASIC

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Manufacturer Restriction: für Heizkörper, für Verdampfer
• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV695
• Manufacturer: ESEN SKV

• Number of pins: 2
• Socket colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 9636777180, 89422 02020
• Manufacturer: MEAT&DORIA

• for OE number: 9639381480
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Fabrication Number: ECM-PE-000
• Manufacturer: NTY
• Name: NTY ECM-PE-000

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-BM-002

• Engine Code: NFU (TU5JP4)
• Construction Year from: 06.2005
• for RPO number from: 10437
• Colour: green
• Corresponds to the original part in colour: brown
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.671, 1.880.863, 1.880.866, 1.880.867, 1.880.927

• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Sensor Type: NTC Sensor
• for OE number: 13 62 7 535 068
• Manufacturer: MEAT&DORIA

• Construction Year to: 10.2010
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Engine Code: NFU (TU5JP4)
• Construction Year to: 05.2005
• for RPO number up to: 10436
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

Manufacturer: FAST

• for RPO number up to: 10436
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2008
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Housing Colour: green
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Housing Colour: brown
• Number of pins: 2
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Engine Code: NFU (TU5JP4)
• Required quantity: 1
• Name: EP 1.957.165
• Manufacturer: EPS

• Construction Year to: 10.2010
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Required quantity: 1
• Manufacturer: BREMI

• Fitting Position: Suction Pipe
• Connector Shape: rectangular
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• for OE number: 9639381480
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Manufacturer: FAST

• Alternatively:
• Number of pins: 4
• Weight [kg]: 0.022
• Alternative Repair Kit: 550133
• Manufacturer: ERA

• Construction Year to: 06.2005
• for RPO number up to: 10436
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Length [mm]: 550
• Fitting Position: Front, after catalytic converter
• Transmission Type: Automatic Transmission
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-CT-000
• Manufacturer: NTY
• Name: NTY ESL-CT-000

• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Manufacturer Restriction: Citroen, Peugeot, Renault
• Number of pins: 4
• Cable Length [mm]: 200
• Supplementary Article/Supplementary Info: with socket housing
• Supplementary Article/Info 2: with pipe
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 1.5
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• for OE number: 9639381480
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Number of pins: 4
• Pressure from [kPA]: 14
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP
• Additional information: PS10128 DEL
• Lisainfo: PS10128 DEL

• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY
• Lisainfo: 11-148120004
• Additional information: 11-148120004

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 96 393 814 80
• Name: SW 62 93 7880
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 1628HN
• Manufacturer: DELLO AUTOMEGA

• Colour: black
• Number of pins: 4
• Weight [kg]: 0.05
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: FAE

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• for OE number: 96 393 814 80
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Emission Standard: CEE 2000, FL5/L5, L5
• Number of pins: 4
• Length [mm]: 580
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle type:
• Construction Year from: 11.2010
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,220
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 10.2010
• Manufacturer: BOSCH

• Engine Code: NFU (TU5JP4)
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: NFU (TU5JP4)
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Manufacturer: EPS

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Country Specific Design: Brazil
• Block Separation:
• Number of pins: 4
• Length [mm]: 455
• Manufacturer: TOPRAN

Emission Standard: CEE 2000, FL5/L5, Technical pollution reduction K, L4, L5, US 94 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 10.2010
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Required quantity: 1
• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400301
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: TU5JP4
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Length [mm]: 536
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV062
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 07.2008
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV689

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: NFU (TU5JP4)
• Voltage [V]: 12
• Length [mm]: 540
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 10.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 570
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Emission Standard: EEC 2000, Euro 4
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2008
• Lambda Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV696
• Manufacturer: ESEN SKV

• Engine Code: NFU
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.137
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Planar probe
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 10.2010
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 10.2010
• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• for OE number: 1628KY, 55353148
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Engine Code: NFU (TU5JP4)
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Length [mm]: 600
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE