• Production date to: 14.04.2015
• Fitting Position: Front Axle
• Quantity per axle: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 5033A6
• Manufacturer: SASIC

• Length [mm]: 203
• Inner Diameter [mm]: 84
• Material: Thermoplast
• Fitting Position: Front Axle Right, Front Axle Left
• Weight [kg]: 0.09
• Name: SW 64 10 3957
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 203
• Inner Diameter [mm]: 84
• Material: Thermoplast
• Fitting Position: Front Axle Right, Front Axle Left
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 207
• SVHC: No SVHC present!
• Name: LU 810013310
• Manufacturer: FAG

• for OE number: 50705790
• Fitting Position: Front Axle
• Material: Plastic
• Weight [g]: 74
• Name: IM 27999
• Manufacturer: ORIGINAL IMPERIUM

• Production date to: 14.04.2015
• Length [mm]: 207
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.23
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle type: Jumper
• Fitting Position: Front Axle
• Height [mm]: 205
• Weight [kg]: 0.16
• Packaging length [cm]: 20.5
• Packaging width [cm]: 10.6
• Packaging height [cm]: 10.6
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Spring Type: for vehicles without air suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• for OE number: 5206 KG
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle Left, Rear Axle Right
• Max. Length [mm]: 476
• Min. Length [mm]: 315
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Spring Type: for vehicles without air suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye
• Manufacturer: JAPKO

for OE number: 5206TR, 5206TT, 5206TX, 5206LW, 5206VC, 5206VF, 5206PA, 5206VG, 5206VH, 5206PG, 5206TY, 5206NA

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle Left, Rear Axle Right
• Max. Length [mm]: 444
• Min. Length [mm]: 293
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Vehicle type: Relay
• Fitting Position: Rear Axle
• Min. Length [mm]: 283
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Max. Length [mm]: 418
• Shock Absorber Design: Suspension Strut
• Name: CFD 560924
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• for OE number: 5206 KP, 5206 KQ, 5206 KV, 5206 TV, 5206 TZ
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Spring Type: for vehicles without air suspension
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

for OE number: 5206TS, 5206TW, 5206LT, 5206VA, 5206VS, 5206VT, 5206LY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

for OE number: 5206 KG, 5206 KH, 5206 LT, 5206 LX, 5206 LY, 5206 TS, 5206 TW, 5206 VA, 5206 VS, 5206 VT

• Vehicle type: Light 11-15 Q, Light 17-18 Q
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Length [mm]: 463
• Length 1 [mm]: 283
• Length 2 [mm]: 418
• Spring Type: for vehicles with leaf spring suspension
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Max. Length [mm]: 445
• Manufacturer: FAST

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Max. Length [mm]: 421
• Manufacturer: FAST

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Max. Length [mm]: 472
• Manufacturer: FAST

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with heavy duty suspension
• Spring Type: for vehicles without air suspension
• Payload to [kg]: 3,500
• Check OE number:
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Vehicle type: Relay
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 2.2
• Bore Ø [mm]: 35
• Observe technical data:
• Length 1 [mm]: 282
• Length 2 [mm]: 419
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: PK457
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Vehicle type: Relay
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 2.5
• Bore Ø [mm]: 35
• Observe technical data:
• Length 1 [mm]: 315
• Length 2 [mm]: 476
• Piston Rod Diameter [mm]: 15.8
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Spring Type: for vehicles without air suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• for OE number: 5202XG
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Spring Type: for vehicles without air suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• for OE number: 5202ZK
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Spring Type: for vehicles without air suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Diameter [mm]: 25
• Manufacturer: KAMOKA

• Vehicle type: Light 11-15 Q
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 1 [mm]: 501
• Length 2 [mm]: 687
• Piston Rod Diameter [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
FIAT DUCATO 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FIAT DUCATO 06-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

for OE number: 5202 XG, 5202 XH, 5202 ZH, 5202 ZJ, 5208 53, 5208 54, 5208 L2, 5208 L3, 5208 L6

• Climate Zones: not for hot climate zones
• Special Purpose Vehicle: not for motor home
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Diameter [mm]: 50.5
• Max. Length [mm]: 465
• Manufacturer: KAYABA
• Name: KY 345700

General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles with heavy duty suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Shock Absorber System: Twin-Tube
• Piston Rod Diameter [mm]: 28
• Shock Absorber Design: Suspension Strut
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Spring Type: for vehicles without air suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Diameter [mm]: 25
• Article number of recommended accessories: SMJ0161, SMJ0162, SMJ0247
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Suspension: for vehicles with heavy duty suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Shock Absorber System: Twin-Tube
• Piston Rod Diameter [mm]: 25
• Shock Absorber Design: Suspension Strut
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Vehicle type: Relay
• Fitting Position: Front Axle
• Article number of recommended accessories: PK285
• Pin Diameter [mm]: 28
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 451962
• Manufacturer: DACO

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• for OE number: 5202 ZK, 5202 ZL, 5208 56, 5208 L4, 5208 L5
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Climate Zones: not for hot climate zones
• Special Purpose Vehicle: not for motor home
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Diameter [mm]: 50.5
• Max. Length [mm]: 438
• Manufacturer: KAYABA
• Name: KY 345701

General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 522
• Spring Type: for vehicles with leaf spring suspension
• Length 1 [mm]: 315
• Length 2 [mm]: 476
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

for OE number: 1355822080, 1355823080, 1355824080, 1355826080, 1355828080, 1356866080, 1356966080, 1357402080, 1357763080, 1361278080, 1362551080, 1362557080, 1362578080, 1362579080, 1369848080, 1369851080 Additional information: "Tootja: BILSTEIN
JUMPER/DUCATO
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
JUMPER/DUCATO
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• for OE number: 5206 KP, 5206 KQ, 5206 KV, 5206 TV, 5206 TZ
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SE32/15X138A
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Vehicle type: Light 11-15 Q, Light 17-18 Q
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 463
• Spring Type: for vehicles with leaf spring suspension
• Length 1 [mm]: 282
• Length 2 [mm]: 417
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-183398
• Quality class: Q

for OE number: 1355825080, 1355831080, 1357468080, 1357470080, 1359217080, 1359219080, 1362550080, 1362552080, 1362559080, 1362561080, 1362880080 Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: Light 17-18 Q
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 1 [mm]: 495
• Length 2 [mm]: 662
• Piston Rod Diameter [mm]: 28
• Spring Type: for vehicles with coil spring suspension
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
FIAT DUCATO (250) 06
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FIAT DUCATO (250) 06
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SE32/15X163A
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: SACHS

for OE number: 5206 KG, 5206 KH, 5206 LT, 5206 LX, 5206 LY, 5206 TS, 5206 TW, 5206 VA, 5206 VS, 5206 VT SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Vehicle type: Relay
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 2.3
• Bore Ø [mm]: 35
• Observe technical data:
• Length 1 [mm]: 293
• Length 2 [mm]: 444
• Piston Rod Diameter [mm]: 15.8
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SE32/15X150A
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: SACHS
• Lisainfo: 314 715
• Additional information: 314 715

for OE number: 5206 JL, 5206 JN, 5206 KJ, 5206 KK, 5206 KN, 5206 KZ, 5206 LA, 5206 LS, 5206 LV, 5206 LW, 5206 NA, 5206 NZ, 5206 PA, 5206 PE, 5206 PF, 5206 PG, 5206 TR, 5206 TT, 5206 TX, 5206 TY, 5206 VC, 5206 VF, 5206 VG, 5206 VH SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Plate
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Version: LIGHT
• Max. Length [mm]: 687
• Manufacturer: FAST

• Fitting Position: Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Plate
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Version: HEAVY
• Max. Length [mm]: 661
• Manufacturer: FAST

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-691900
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles with standard suspension
• Spring Type: for vehicles without air suspension
• Payload to [kg]: 4,000
• Check OE number:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length 1 [mm]: 444
• Length 2 [mm]: 293
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with heavy duty suspension
• Spring Type: for vehicles without air suspension
• Payload to [kg]: 4,000
• Check OE number:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length 1 [mm]: 476
• Length 2 [mm]: 315
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Vehicle type: Relay
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 7.7
• Bore Ø [mm]: 35
• Observe technical data:
• Piston Rod Diameter [mm]: 25
• Article number of recommended accessories: MK308R, MK309L, PK285
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Climate Zones: not for hot climate zones
• Special Purpose Vehicle: not for motor home
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Diameter [mm]: 25
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA
• Name: KY 335827
• Additional information: KYB335827
• Lisainfo: KYB335827

Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Vehicle type: Relay
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 8.1
• Bore Ø [mm]: 35
• Observe technical data:
• Piston Rod Diameter [mm]: 28
• Article number of recommended accessories: MK308R, MK309L, PK285
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Vehicle type: Camper
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 522
• Spring Type: for vehicles with leaf spring suspension
• Length 1 [mm]: 315
• Length 2 [mm]: 476
• Suitable for vehicle type: Motor home
• Shock Absorber System: Twin-Tube
• Name: BI 19-326986
• Manufacturer: BILSTEIN

for OE number: 1355822080, 1355823080, 1355824080, 1355826080, 1355828080, 1356866080, 1356966080, 1357402080, 1357763080, 1361278080, 1362551080, 1362557080, 1362578080, 1362579080, 1369848080, 1369851080 Vehicle Equipment 2: for vehicles without ALKO low frame chassis, for vehicles with works ladder frame

• Vehicle type: Camper
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 463
• Spring Type: for vehicles with leaf spring suspension
• Length 1 [mm]: 283
• Length 2 [mm]: 418
• Suitable for vehicle type: Motor home
• Shock Absorber System: Twin-Tube
• Name: BI 19-325491
• Manufacturer: BILSTEIN

for OE number: 1355825080, 1355831080, 1357468080, 1357470080, 1359217080, 1359219080, 1362550080, 1362552080, 1362559080, 1362561080, 1362880080 Vehicle Equipment 2: for vehicles without ALKO low frame chassis, for vehicles with works ladder frame

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• Parameter: SFE36/28X165
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• for OE number: 5202 ZK, 5202 ZL, 5208 56, 5208 L4, 5208 L5
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE40/22X170
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS
• Name: SHS 319656

SVHC: No information available, please contact the manufacturer!

• Vehicle type: Light 11-15 Q
• Suspension: for vehicles with standard suspension
• for OE number: 50707000, 50707078, 50708386
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Spring Type: for vehicles with coil spring suspension
• Length 1 [mm]: 501
• Length 2 [mm]: 687
• Piston Rod Diameter [mm]: 25
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: Light 17-18 Q
• Suspension: for vehicles with standard suspension
• for OE number: 50707867, 50707946, 50708439, 507086609
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length [mm]: 751
• Spring Type: for vehicles with coil spring suspension
• Length 1 [mm]: 495
• Length 2 [mm]: 662
• Piston Rod Diameter [mm]: 28
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-196682
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Check OE number:
• Spring Type: for vehicles without air suspension
• Parameter: SFE36/25X185
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

for OE number: 5202 XG, 5202 XH, 5202 ZH, 5202 ZJ, 5208 53, 5208 54, 5208 L2, 5208 L3, 5208 L6 SVHC: No information available, please contact the manufacturer!