• Fitting Position: Lower, inner, Rear Axle Left, Rear Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 165
• Inner Diameter [mm]: 12
• Name: ALT 91693AL
• Manufacturer: ALTE AUTOMOTIVE

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.61
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.619
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Suspension Rod
• Packaging length [cm]: 23
• Packaging width [cm]: 6
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Control/Trailing Arm Type: Control Arm
• Length [mm]: 165
• Fitting Position: Rear Axle both sides
• Manufacturer: ASHIKA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Fabrication Number: ZWD-MS-102
• paired article number: ZWD-MS-103
• Manufacturer: NTY
• Name: NTY ZWD-MS-102

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Fabrication Number: ZWD-MS-103
• paired article number: ZWD-MS-102
• Manufacturer: NTY
• Name: NTY ZWD-MS-103

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 316
• Inner Diameter [mm]: 12
• Name: ALT 95820AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, outer, Rear, Left, Upper, Right
• Material: Sheet Steel
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 375
• Width [mm]: 125
• Height [mm]: 50
• Manufacturer: DELPHI
• Name: DE TC3272

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 20
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
MITS. LANCER 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MITS. LANCER 07-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 20
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm left

Lisainfo: "Tootja: SRL
MITS. LANCER 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MITS. LANCER 07-
(kvaliteediklass: PJ)"

• Inner Diameter [mm]: 12
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm, Four-Point Link (CV)
• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.719
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEBI
• Additional information: FE175413
• Lisainfo: FE175413

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 20
• paired article number: 9050288
• Manufacturer: KAMOKA

• Construction Year to: 12.2012
• Fitting Position: Rear Axle, outer, Upper
• Control/Trailing Arm Type: Trailing Arm
• Manufacturer: KAVO

• Inner Diameter [mm]: 12
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm, Four-Point Link (CV)
• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.719
• Supplementary Article/Supplementary Info: with rubber mounts
• Manufacturer: BLUE PRINT ZAWIESZENIE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm, Four-Point Link (CV)
• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.719
• Supplementary Article/Supplementary Info: with rubber mounts
• Name: SW 33 10 2891
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Lower
• paired article number: S060887
• Cone Size [mm]: 20
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: Front Axle Right, Lower
• paired article number: S060886
• Cone Size [mm]: 20
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Right Front
• Weight [kg]: 3.59
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 38
• Packaging width [cm]: 35
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JPN

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JPN

• Fitting Position: Front Axle, Lower Right
• Length [mm]: 341
• Supplementary Article/Supplementary Info: with bush
• Control/Trailing Arm Type: Control Arm
• General Information: Control_Arm_Includes_Hardware:YES
• Manufacturer: CTR

• Fitting Position: Front Axle, Lower Left
• Length [mm]: 341
• Supplementary Article/Supplementary Info: with bush
• Control/Trailing Arm Type: Control Arm
• General Information: Control_Arm_Includes_Hardware:YES
• Manufacturer: CTR

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-20897
• Weight [kg]: 3.5
• Name: DY 20-20898
• Manufacturer: DYS

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-20898
• Weight [kg]: 3.5
• Name: DY 20-20897
• Manufacturer: DYS

• Fitting Position: Front Axle Right
• Required quantity: 1
• paired article number: VKDS 323106 B
• Hole Spacing 1/Hole Spacing 2: 340,7
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Manufacturer: SKF
• Name: SK VKDS323107B

• Fitting Position: Front Axle Left
• Required quantity: 1
• paired article number: VKDS 323107 B
• Inner Diameter [mm]: 14.2
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Name: SK VKDS323106B
• Manufacturer: SKF

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Cone Size [mm]: 20
• Inner Diameter [mm]: 14
• paired article number: 88961AL
• Name: ALT 88960AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Left Front
• Weight [kg]: 3.59
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 38
• Packaging width [cm]: 35
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right, outer, Right, Lower
• Material: Sheet Steel
• paired article number: TC2344
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 400
• Width [mm]: 390
• Height [mm]: 80
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, outer, Left, Lower
• Material: Sheet Steel
• paired article number: TC2345
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 400
• Width [mm]: 390
• Height [mm]: 80
• Manufacturer: DELPHI ZAWIESZENIE

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• paired article number: 49398837
• Name: COC 49398838
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• paired article number: 49398838
• Name: COC 49398837
• Manufacturer: CORTECO

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, outer
• Length [mm]: 353
• Cone Size [mm]: 20
• Material: Sheet Steel
• paired article number: JTC2227
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, outer
• Length [mm]: 353
• Cone Size [mm]: 20
• Material: Sheet Steel
• paired article number: JTC2228
• Manufacturer: TRW ZAWIESZENIE

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Semi-Trailing Arm
• Fabrication Number: ZWT-MS-008
• Manufacturer: NTY
• Name: NTY ZWT-MS-008

Fitting Position: Rear Axle Left, Rear Axle, outer, Left, Lower, Rear

• Control/Trailing Arm Type: Semi-Trailing Arm
• Fabrication Number: ZWT-MS-009
• Name: NTY ZWT-MS-009
• Manufacturer: NTY

Fitting Position: Rear Axle Right, Rear Axle, outer, Right, Lower, Rear

• paired article number: 38171
• Cone Size [mm]: 20
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 3.5
• Supplementary Article/Supplementary Info: with rubber mounts
• Supplementary Article/Info 2: with ball joint
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer, Lower, Lower Front Axle, Left
• Construction Year to: 12.2012
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• paired article number: V37-0110
• Weight [kg]: 3.47
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, outer
• Length [mm]: 353
• Cone Size [mm]: 20
• Material: Sheet Steel
• paired article number: 38538 01
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower, outer
• Length [mm]: 353
• Cone Size [mm]: 20
• Material: Sheet Steel
• paired article number: 38539 01
• Manufacturer: LEMFORDER
• Name: LMI 3853801

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Bolt Head Diameter [mm]: 20
• paired article number: 821 0887 10
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Bolt Head Diameter [mm]: 20
• paired article number: 821 0888 10
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA