• Engine Code: 128 AC.000, 128 A1.000
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Engine Code: 128 A1.000, 128 AC.000
• Required quantity: 4
• Quantity per packing unit: 10
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• for OE number: 21013707001
• Connector type: Removable SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Gross Weight [g]: 59
• alternative item: W20TT
• Manufacturer: DENSO
• Name: DN W20EPRU

• for OE number: 59622A
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• for OE number: 09482-00299
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Engine Code: 128 AC.000, 128 A1.000
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.7
• Diameter [mm]: 21
• Length [mm]: 73.5
• Thread Size: M14 x 1,25
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1975
• Required quantity: 4
• Block Separation:
• Construction Year from: 06.1975
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Manufacturer: BOSCH
• Name: BS 0242235663

• Quantity per packing unit: 4
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK
• Name: NG V-LINE 2
• Additional information: V-LINE 2
• Lisainfo: V-LINE 2

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Construction Year to: 12.1975
• Block Separation:
• Construction Year from: 06.1975
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Packing Type: Carton
• Thread Length [mm]: 19
• Technical Information Number: RN9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE006/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK - NTK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK
• Name: NG BPR6E

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Engine Code: 128 A1.000, 128 AC.000
• Required quantity: 4
• Quantity per packing unit: 4
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• Connector type: Crimped SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Gross Weight [g]: 61
• alternative item: IW20TT, IW20
• Manufacturer: DENSO
• Name: DN W20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Carton
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1,25
• Spanner Size: 21 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Manufacturer: BERU

• Required quantity: 4
• Quantity Unit: Kit
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Manufacturer: BOSCH
• Name: BS 0242235909

• Engine Code: 128 A1.000, 128 AC.000
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• Connector type: Solid SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Gross Weight [g]: 61
• alternative item: IW20TT
• Name: DN IW20TT
• Manufacturer: DENSO
• Quality class: Q

Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Carton
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode