• Engine Number from: 8247895
• Switch Pressure [bar]: 0.3
• Housing Colour: black
• Number of pins: 1
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Thread Size: M 14x1,5
• Colour: black
• Number of pins: 1
• Switch Pressure [bar]: 0.35
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with seal
• for OE number: 1535416
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 1
• Thread Size: M16x1,5
• Spanner Size: 19 mm
• for OE number: 60813687
• Manufacturer: KAMOKA

• Engine Code: 160 A1.046
• Engine Number to: 8247895
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Number to: 8247895
• Thread Size: M14x1,5
• Pressure [bar]: 0.6
• Manufacturer: FAE

• Engine Code: 836 A4.000
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Engine Code: 160 A1.046
• Quantity: 2
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: M16 x 1,5
• Number of pins: 1
• Manufacturer: ERA

• Engine Number from: 8247895
• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Engine Number from: 8247895
• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: MAG

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: blue
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 160 A1.046
• Quantity: 2
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.099, 1.880.116, 1.880.141, 1.880.142, 1.880.156, 1.880.170, 1.880.193

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M16x1,50
• Spanner Size: 19
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA101

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 1
• Switch Pressure [bar]: 0.35
• Thread Size: M 14x1,5
• Colour: black
• Supplementary Article/Supplementary Info: with gaskets/seals
• for article number: 2324051
• Version: AM
• Manufacturer: METZGER

• Thread Size: M 16x1,5 con.
• Manufacturer: FAE

• Engine Code: 160 A1.046, 836 A4.000
• Engine Number from: 8247895
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 1
• Switch pressure from [bar]: 0.2
• Switch pressure to [bar]: 0.5
• Thread Size: M 14x1,5
• Housing Type: without housing
• Colour: black
• Supplementary Article/Supplementary Info: with gaskets/seals
• Quality: IAM
• Manufacturer: METZGER

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: 836 A4.000
• Thread Size: M18x1.5 con
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Sensor Type: Passive sensor
• for OE number: 10456604
• Manufacturer: KAMOKA

• Thread Size: M18 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Cable Length [mm]: 430
• Alternatively:
• Number of pins: 2
• Weight [kg]: 0.06
• Resistor [Ohm]: 800
• Alternative Repair Kit: 550056
• Fitting Depth [mm]: 13.5
• Manufacturer: ERA

• Engine Code: 160 A1.046
• Number of pins: 2
• Connector Shape: rectangular
• Cable Length [mm]: 470
• Sensor Type: Inductive Sensor
• Number of mounting bores: 2
• Resistor [Ohm]: 780
• Fitting Depth [mm]: 13.5
• for OE number: 7564592
• Manufacturer: MEAT&DORIA

• Sensor Type: Active sensor
• for OE number: 10456585
• Manufacturer: KAMOKA

• Engine Code: 160 A1.046, 836 A4.000
• Construction Year to: 03.1993
• Block Separation:
• Construction Year from: 03.1995
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Engine Code: 836 A4.000
• Thread Size: M18x1,5
• Spanner Size: 19
• Name: EP 1.830.262
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Engine Code: 160 A1.046
• Length [mm]: 470
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• VET Number from: 6073159/7559354
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Engine Code: 836 A4.000
• Vehicle Equipment: for vehicles without air conditioning
• Length [mm]: 735
• Name: EP 1.953.074
• Manufacturer: EPS

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Engine Code: 836 A4.000
• Construction Year from: 03.1995
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 836 A4.000
• Construction Year from: 03.1995
• Lambda Sensor: Regulating Probe, Heated
• RICAMBI no. up to: 7559353
• Block Separation:
• RICAMBI Number from: 7559354
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 836 A4.000
• Vehicle Equipment: for vehicles with air conditioning
• Length [mm]: 640
• Manufacturer: FACET

• Engine Code: 836 A4.000
• Construction Year from: 03.1995
• Vehicle Equipment: for vehicles without air conditioning
• Cable Length [mm]: 750
• Manufacturer: FAE

• Engine Code: 836 A4.000
• Number of pins: 3
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 160 A1.046
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Length [mm]: 1,215
• Number of circuits: 3
• Resistor [Ohm]: 4.5
• Conductor Number: 3
• Cable Length [mm]: 1,215
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Engine Code: 160 A1.046
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,250
• Number of circuits: 3
• Manufacturer: ERA

• Construction Year to: 03.1995
• Engine Code: 160A1.046 SPI-Bosch
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 985
• Number of circuits: 3
• Weight [kg]: 0.18
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV545
• Manufacturer: ESEN SKV

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Lambda Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 03.1995
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Lambda Sensor: Regulating Probe
• Construction Year from: 03.1995
• Voltage [V]: 12
• Length [mm]: 880
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV022
• Manufacturer: ESEN SKV

• Engine Code: 836 A4.000
• Vehicle Identification Number (VIN) from: 6073158
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 03.1995
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,175
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV617

• Engine Code: 160 A1.046
• Line insulation design: with silicone-coated woven-fibre insulation
• Diameter [mm]: 23.7
• Length [mm]: 995
• Cable Length [mm]: 950
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 3
• Weight [kg]: 0.166
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 836 A4.000
• Vehicle Identification Number (VIN) from: 6073158
• for OE number: 60810814, 60814386
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,175
• Number of pins: 4
• Weight [g]: 136
• Gross Weight [g]: 166
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year to: 03.1995
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: 160 A1.046
• Cable Length [mm]: 985
• Manufacturer: DELPHI

• Engine Code: 836 A4.000
• Construction Year from: 03.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• RICAMBI no. up to: 7559353
• Block Separation:
• RICAMBI Number from: 7559354
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 160 A1.046
• Construction Year to: 03.1993
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 04.1994
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 01.1995
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,000
• Number of pins: 4
• Technical Information Number: Universal 77008
• Manufacturer: FAE

• Engine Code: 836 A4.000
• Construction Year from: 03.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• RICAMBI Number from: 7559354
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS