• Engine Code: 156 A2.246
• Construction Year to: 03.1997
• for OE number: 7619303, 053906265
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 986
• Number of pins: 3
• Weight [g]: 121
• Gross Weight [g]: 151
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
80 (89, 89Q, 8A, B3)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
80 (89, 89Q, 8A, B3)
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: 141 C2.000
• Construction Year from: 01.1995
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 156 A2.246
• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 3
• Cable Length [mm]: 230
• for article number: 81014E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: 156 A2.246, 141 C2.000
• Construction Year from: 07.1990, 01.1995
• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe, Heated
• Fuel Mixture Formation: Petrol Injection
• Manufacturer Restriction: WEBER
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 05.1991
• Engine Code: 156A2.146
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 710
• Number of circuits: 3
• Weight [kg]: 0.16
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV547

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Length [mm]: 1,215
• Number of circuits: 3
• Resistor [Ohm]: 4.5
• Conductor Number: 3
• Cable Length [mm]: 1,215
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Engine Code: 156 A2.246
• Construction Year to: 03.1997
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 05.1991
• Voltage [V]: 12
• Length [mm]: 670
• Number of circuits: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV063
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Construction Year from: 07.1990
• Construction Year to: 03.1997
• Voltage [V]: 12
• Length [mm]: 880
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV022
• Manufacturer: ESEN SKV

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Lambda Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Regulating Probe
• Construction Year to: 03.1997
• Voltage [V]: 12
• Length [mm]: 1,215
• Number of circuits: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV066
• Manufacturer: ESEN SKV

• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Engine Code: 141 C2.000
• Construction Year from: 01.1995
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• for OE number: 000 540 3917
• Cable Length [mm]: 750
• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 1,000
• for article number: 81027
• Manufacturer: MEAT&DORIA

• Construction Year from: 01.1995
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,175
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV617

• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 156 A2.246, 141 C2.000
• Manufacturer Restriction: BOSCH INJECTION
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Engine Code: 156 A2.246
• Manufacturer Restriction: BOSCH SPI
• Line insulation design: with silicone-coated woven-fibre insulation
• Diameter [mm]: 23.7
• Length [mm]: 995
• Cable Length [mm]: 950
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 3
• Weight [kg]: 0.166
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 156 A2.246
• Construction Year from: 07.1990
• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: WEBER
• Fuel Mixture Formation: Petrol Injection
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 141 C2.000
• Construction Year from: 01.1995
• Exhaust System: for pre-catalytic converter
• for OE number: 60814386
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,175
• Number of pins: 4
• Weight [g]: 136
• Gross Weight [g]: 166
• Manufacturer: DENSO
• Name: DN DOX-1545
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 07.1992
• Construction Year to: 06.1994
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 156 A2.246
• Engine Number to: 4233955
• VET Number to: 4434756
• Cable Length [mm]: 985
• Manufacturer: DELPHI

• Construction Year from: 07.1992
• Construction Year to: 07.1995
• Engine Code: 141 C2.000
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 03.1997
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: BOSCH
• Fuel Mixture Formation: Petrol Injection
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 01.1995
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 156 A2.246, 141 C2.000
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Engine Code: 156 A2.246
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,000
• Number of pins: 4
• Technical Information Number: Universal 77008
• Manufacturer: FAE