• Engine Code: 187 A1.000
• Construction Year from: 12.2000
• Exhaust System: for pre-catalytic converter
• for OE number: 46760867
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 260
• Number of pins: 4
• Weight [g]: 81
• Gross Weight [g]: 111
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
PANDA (141A/), 03.80
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PANDA (141A/), 03.80
(kvaliteediklass: Q)"

• Connector Shape: rectangular
• Supplementary Article/Info 2: with seal ring
• Colour Coding: blue
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Switch Point [°C]: 140
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 46477022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: blue
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 46764212
• Cable Length [mm]: 960
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Fabrication Number: ECP-FT-000
• Manufacturer: NTY

• Engine Code: 176 B2.000
• Cable Length [mm]: 900
• Sensor Type: Passive sensor
• for OE number: 46417650
• Manufacturer: KAMOKA

• Cable Length [mm]: 780
• Sensor Type: Passive sensor
• for OE number: 46778331
• Manufacturer: KAMOKA

• Cable Length [mm]: 560
• Sensor Type: Passive sensor
• for OE number: 46774532
• Manufacturer: KAMOKA

• Fabrication Number: ECP-FT-003
• Manufacturer: NTY

• Thread Size: M 16x1,5 con.
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: 176 B2.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.143
• Manufacturer: EPS

for article number: 1.880.100, 1.880.108, 1.880.141, 1.880.152, 1.880.153, 1.880.193

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Housing Colour: blue
• Thread Size: M12x1,5
• Manufacturer: FAE

• Thread Size: M16 x 1,5
• Spanner Size: 22
• Number of pins: 1
• Temperature range to [°C]: 115
• Manufacturer: ERA

• Voltage [V]: 12
• Fabrication Number: ECM-FT-001
• Lisainfo: FIAT MAREA WEEKEND 1.6 99-, PALIO 1.2 98-
• Additional information: FIAT MAREA WEEKEND 1.6 99-, PALIO 1.2 98-

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-HD-011
• Manufacturer: NTY

• Spanner Size: 21 mm
• Number of pins: 4
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Switch Point [°C]: 115
• Thread Size: M16x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 3
• Colour: black
• for OE number: 1563 J4
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 12.2000
• Engine Code: 187 A1.000
• Voltage [V]: 12
• Length [mm]: 600
• Number of pins: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV226

• Supplementary Article/Supplementary Info: with seal
• Voltage [V]: 12
• Resistor [Ohm]: 2,055, 327
• Number of pins: 2
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Temperature range [°C]: 25, 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009309291
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: Automatic Transmission
• Voltage [V]: 12
• Weight [kg]: 0.03
• Operating Mode: Electric
• Number of pins: 3
• Warranty: 3 years warranty
• Name: CE 17SKV004
• Manufacturer: ESEN SKV

• Sensor Type: Active sensor
• for OE number: 13 62 7 791 127
• Manufacturer: KAMOKA

• Engine Code: 176 B2.000
• Voltage [V]: 12
• Length [mm]: 950
• Number of pins: 3
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV298
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 1
• Cable Length [mm]: 960
• Sensor Type: Inductive Sensor
• Resistor [kOhm]: 1.1
• for OE number: 46764212
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Cable Length [mm]: 845
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,350
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV100

• Cable Length [mm]: 560
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.066
• Operating Mode: Electric
• Alternative Repair Kit: 550064
• Fitting Depth [mm]: 34.5
• Resistor [kOhm]: 1.1
• Manufacturer: ERA

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Cable Length [mm]: 780
• Number of pins: 3
• Weight [kg]: 0.074
• Fitting Depth [mm]: 34.5
• Resistor [kOhm]: 1.1
• Manufacturer: ERA

• Cable Length [mm]: 950
• Manufacturer: FAST

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV107

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV108

• Engine Code: 176 B2.000
• Construction Year to: 09.2003
• Manufacturer Restriction: WEBER
• Fuel Mixture Formation: Petrol Injection
• Manufacturer: BOSCH
• Name: BS 0280130026

Manufacturer: FAST

• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Manufacturer: FAST

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 24
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Number of Holes: 2
• Mounting bores distance [mm]: 43
• Manufacturer: ERA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Manufacturer: ERA

• Construction Year to: 08.2003
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Engine Code: 176 B2.000
• Alternatively:
• Number of pins: 4
• Weight [kg]: 0.028
• Alternative Repair Kit: 550125
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.093
• Housing Type: with housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• without ECE/ABE approval:
• Manufacturer: SKV GERMANY
• Name: CE 17SKV607

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Construction Year to: 08.2003
• Engine Code: 176B2.000,187A1.000
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 08.2003
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 253804

• Number of pins: 3
• Operating Mode: Mechanical
• Rotation Direction: Clockwise rotation
• Manufacturer: DELPHI
• Name: DE SS10693-12B1

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Length [mm]: 76.5
• Width [mm]: 65
• Height [mm]: 30
• Weight [kg]: 0.03, 0.061
• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Housing Colour: black
• Cable Length [mm]: 800
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Number of pins: 3
• Manufacturer Restriction: AM-VERSION
• Manufacturer: METZGER

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: 176 B2.000
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10226

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Engine Code: 176 B2.000
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.003
• Manufacturer: EPS

• Pressure [Pa] from: 17,000
• Pressure [Pa] to: 105,000
• Manufacturer: METZGER

• Construction Year to: 08.2003
• Alternatively:
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Additional information: VA 253817
• Lisainfo: VA 253817

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Engine Code: 176 B2.000
• Name: EP 1.995.001
• Manufacturer: EPS

• Construction Year to: 08.2003
• Observe technical data:
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.08
• Name: VA 253847
• Manufacturer: VALEO

• Engine Code: 187 A1.000
• Construction Year from: 12.2000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Engine Code: 176 B2.000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year to: 09.2003
• Transmission Type: Automatic Transmission
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,175
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV617

• Engine Code: 176 B2.000
• for OE number: 46444284, 60814386
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,175
• Number of pins: 4
• Weight [g]: 136
• Gross Weight [g]: 166
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year to: 09.2003
• Transmission Type: Automatic Transmission
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 176 B2.000
• Construction Year to: 09.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986506

• Engine Code: 176 B2.000
• Construction Year to: 09.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Overall Length [mm]: 1,000
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003772

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 71718201
• Supplementary Article/Info 2: with seal ring