• Construction Year to: 06.2006
• for OE number: 9636876680, 4571477
• Thread Size: M18x1.5
• Cable Length [mm]: 1,640
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 110
• Gross Weight [g]: 143
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"

• Engine Code: RFL
• Number of pins: 2
• Socket colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1338A7
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Socket colour: bright blue
• Colour Coding: yellow
• Thread Size: M 12x1,5
• Spanner Size: 21
• for OE number: 1338A6
• Manufacturer: MEAT&DORIA

• for OE number: 96 310 010
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 3
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 3
• Colour Coding: blue
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 12x1,5
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Engine Code: RFL
• Required quantity: 1
• Manufacturer Restriction: HELLA
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Transmission Type: Manual Transmission
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Manufacturer: FAST

• Required quantity: 1
• Manufacturer: BRM

Name: CZUJNIK CI—N. POWIETRZA CZUJNIK CI—N. POWIETRZA FIAT DUCATO 2,8JTD 00-

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.5
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594623
• Manufacturer: MEAT&DORIA

• Height [mm]: 20.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: RFL
• Required quantity: 1
• Manufacturer: FACET

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Alternative Repair Kit: 550010
• Manufacturer: ERA

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 20.2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: RFL
• Required quantity: 1
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• for OE number: 1563J4
• Manufacturer: MEAT & DORIA

Manufacturer: MAGNETI MARELLI

• Engine Code: RFL
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: RFL
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• Quality: OE EQUIVALENT
• for OE number: 000019208W
• Manufacturer: MEAT&DORIA

• Engine Code: RFL
• Required quantity: 1
• Manufacturer: FACET

• for OE number: 5946,23
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 3
• Socket colour: grey
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Length [mm]: 76.5
• Width [mm]: 65
• Height [mm]: 30
• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: RFL
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• for OE number: 19208W
• Manufacturer: MEAT & DORIA

• Required quantity: 1
• Pressure [Pa] from: 15,000
• Pressure [Pa] to: 105,000
• Voltage [V]: 5
• Number of pins: 3
• Number of mounting bores: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 550
• Number of connectors: 4
• Manufacturer: VERNET

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366435

Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,260
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: RFL
• Required quantity: 1
• Manufacturer Restriction: HELLA
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Engine Code: RFL
• Manufacturer Restriction: HELLA
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Cable Length [mm]: 525
• Oxygen Sensor: Planar Sensor, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 1,250
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 570
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135334
• Manufacturer: HITACHI

• Oxygen Sensor: Diagnostic Probe
• Engine Code: RFL
• Voltage [V]: 12
• Length [mm]: 1,490
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV039
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Engine Code: RFL
• Voltage [V]: 12
• Length [mm]: 540
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV035
• Manufacturer: ESEN SKV

• Number of pins: 2
• Corresponds to the original part in colour: black, white
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Sensor, Heated, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Manufacturer: MAGNETI MARELLI

• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 570
• Cable Length [mm]: 570
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM018

• Fitting Position: after catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• for OE number: 1618Z6
• Manufacturer: MEAT&DORIA

• Engine Code: RFL
• Construction Year to: 06.2006
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Sensor, Heated, Thread pre-greased
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 470
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2006
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: before catalytic converter
• Oxygen Sensor: Heated
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Planar Sensor
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• for OE number: 00001628HQ
• Manufacturer: MEAT&DORIA

• Construction Year to: 06.2006
• Exhaust System: for pre-catalytic converter
• for OE number: 9635978580, 55353148
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: DN DOX-2005
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,260
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: RFL
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 1,260
• Cable Length [mm]: 1,500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.301
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 1,500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 1,300
• Technical Information Number: Universal 77015
• Manufacturer: FAE