• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Brake Caliper Type: for brake caliper with plastic piston
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 69.6
• Height 2 [mm]: 70.7
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Thickness [mm]: 20.1
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Rear Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Width [mm]: 106
• Height [mm]: 46
• Thickness [mm]: 17
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 70
• Height 2 [mm]: 71
• Thickness [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Brake Caliper Type: for brake caliper with plastic piston
• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Height 1 [mm]: 69.6
• Width 2 [mm]: 156.3
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.1
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Driven Units: Camshaft
• Trim Level: HT -939A4000
• for OE number: 71739873
• Number of Teeth: 146
• Width [mm]: 24
• Manufacturer: DAYCO
• Name: DA 94974

• Tensioner Pulley Actuation: Automatic
• Width [mm]: 29
• Diameter [mm]: 66
• Manufacturer: KAMOKA

• Width [mm]: 24
• Number of Teeth: 146
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with rounded tooth profile
• Weight [kg]: 0.22
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Width 1 [mm]: 105.8
• Height 1 [mm]: 47
• Thickness 1 [mm]: 16.8
• Brake System: TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.96
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Width [mm]: 29
• Outer Diameter [mm]: 66
• Manufacturer: FAST

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 16.8
• Width [mm]: 105.6
• Height [mm]: 46.6
• Brake System: TRW
• Weight [kg]: 1
• Manufacturer: TOMEX BRAKES

• Construction Year to: 12.2010
• Number of Teeth: 146
• Length [mm]: 1,168
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D1106-7873 D972-7873
• Test Mark: E1 90R-01881/1004
• WVA Number: 23402 23403
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155.1
• Height 1 [mm]: 69.7
• Height 2 [mm]: 70.7
• Thickness 1 [mm]: 20
• Thickness 2 [mm]: 20
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Additional information: LP1723 DELPHI
• Lisainfo: LP1723 DELPHI

• Construction Year to: 01.2011
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 157
• Height [mm]: 70.9
• Thickness [mm]: 20.2
• Width 2 [mm]: 155
• Height 2 [mm]: 69.6
• Thickness 2 [mm]: 20.2
• WVA Number: 23402
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.04
• Manufacturer: VALEO
• Name: VA 301678

• Length [mm]: 105.6
• Width [mm]: 46.6
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.8
• Brake System: Lucas
• Weight [kg]: 0.96
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width 1 [mm]: 156.3
• Height 1 [mm]: 70.5
• Thickness 1 [mm]: 20
• Width 2 [mm]: 156.3
• Height 2 [mm]: 69.5
• Thickness 2 [mm]: 20
• Brake System: ATE
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: E9 90R-01825/2024
• WVA Number: 24348
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 105.8
• Width 2 [mm]: 105.5
• Height 1 [mm]: 46.6
• Height 2 [mm]: 46.6
• Thickness 1 [mm]: 17.1
• Thickness 2 [mm]: 17.1
• Name: DE LP1964
• Manufacturer: DELPHI

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4995
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 146
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Length [mm]: 1,168
• Manufacturer: GATES

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 19.6
• Width [mm]: 156.4
• Height [mm]: 70.7
• Height 2 [mm]: 69.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Width 2 [mm]: 155.2
• Weight [kg]: 1.65
• Manufacturer: TOMEX BRAKES

• Driven Units: Camshaft
• Number of Teeth: 146
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.17
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Name: CT 1077
• Manufacturer: CONTITECH

• Length [mm]: 156.4, 155.2
• Width [mm]: 70.7, 69.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.15
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 156.4, 155.2
• Width [mm]: 70.7, 69.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.15
• Name: SW 40 91 6492
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 21
• Height 1 [mm]: 70
• Height 2 [mm]: 71
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Width 1 [mm]: 155
• Width 2 [mm]: 157
• Supplementary Article/Info 2: with piston clip
• WVA Number: 23738, 23739
• Manufacturer: BREMBO
• Name: BR P 59 043

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 20
• Height 1 [mm]: 69.9
• Height 2 [mm]: 70.7
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: Teves
• Length 1 [mm]: 155.2
• Length 2 [mm]: 156.4
• WVA Number: 23402, 23403
• Name: SK VKBP80345
• Manufacturer: SKF

• Fitting Position: Front Axle
• Article number of recommended accessories: MWI0220, MBA1180
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Height 1 [mm]: 69.6
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.6
• Wear Warning Contact: prepared for wear indicator
• directional:
• WVA Number: 23738
• Brake System: Teves
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.05
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 105
• Thickness [mm]: 17
• Height [mm]: 47
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24348
• Name: BR P 23 101
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Width [mm]: 105.5
• Height [mm]: 46.6
• Thickness [mm]: 16.8
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24348
• Brake System: Lucas
• Article number of recommended accessories: MBA1689
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Manufacturer: MINTEX

• Construction Year to: 12.2010
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate, with piston clip
• Article number of recommended accessories: 1 987 474 337
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 23402
• Thickness [mm]: 20.2
• Height 1 [mm]: 69.6
• Height 2 [mm]: 70.9
• Width 1 [mm]: 155.3
• Width 2 [mm]: 156.5
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.4
• Height 1 [mm]: 69.9
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Manufacturer: MEYLE

• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Fitting Position: Rear Axle
• Width [mm]: 105.5
• Height [mm]: 46.4
• Thickness [mm]: 17.1
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0333/0435
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 250-511, 8DZ 355 201-211
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Height 1 [mm]: 69.6
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.6
• Wear Warning Contact: prepared for wear indicator
• directional:
• WVA Number: 23738
• Brake System: Teves
• Weight [kg]: 2.05
• Technical Information Number: T1234
• Name: HE 8DB355009311
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 105.6
• Height [mm]: 46.6
• Thickness [mm]: 16.8
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R - 01120/1366
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Article number of recommended accessories: PFK302
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01107/569
• Height [mm]: 70.7
• Width [mm]: 156.4
• Thickness [mm]: 19.6
• Height 2 [mm]: 69.6
• Length 2 [mm]: 155.2
• directional:
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: LUCAS
• Width [mm]: 106
• Height [mm]: 47
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Number of Teeth 1: 114
• Width 1 [mm]: 25.4
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530023310

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Vehicle Identification Number (VIN) from: 2060169
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 23402
• Test Mark: E1 90R-01811/133
• Length [mm]: 156.5
• Thickness [mm]: 20.3
• Height [mm]: 71
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Construction Year to: 12.2010
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with spring, with accessories
• Supplementary Article/Info 2: with bolts/screws
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24348
• Thickness [mm]: 16.5
• Width [mm]: 105.6
• Height [mm]: 47.3
• Number of bolts/screws: 4
• Number of springs: 4
• Brake System: Lucas-Girling
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: LUCAS
• Width [mm]: 106
• Height [mm]: 47
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with spring
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 70
• Height 2 [mm]: 71
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Driven Units: Camshaft
• Surface: Smooth
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 8
• Width [mm]: 29
• Observe technical data:
• Manufacturer: GATES

• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Brake Caliper Type: for brake caliper with plastic piston
• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Height 1 [mm]: 69.6
• Width 2 [mm]: 156.3
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.1
• Brake System: ATE
• Test Mark: E9 90R-02A1259/4467
• MAPP code available:
• Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Outer Diameter [mm]: 66
• Width [mm]: 29
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 531077910

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 156.4
• Height [mm]: 70.7
• Thickness [mm]: 19.6
• Wear Warning Contact: prepared for wear indicator
• directional:
• Test Mark: E9 90R-02A1062/0569
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN): [94000001;], [96000001;], [A1000001;], [A2000001;]
• Width 1 [mm]: 29
• Outer Diameter 1 [mm]: 66
• Manufacturer: SNR

• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Brake Caliper Type: for brake calipers with steel pistons
• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Height 1 [mm]: 69.6
• Width 2 [mm]: 156.3
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.1
• Brake System: ATE
• Test Mark: E9 90R-02A1259/4467
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 70
• Height 2 [mm]: 71
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with spring
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 2060168
• Manufacturer Restriction: LUCAS
• Wear Warning Contact: incl. wear warning contact
• WVA Number: 24294, 20261
• Test Mark: E20 90R-02A0124/087
• Length [mm]: 146.6
• Thickness [mm]: 19.3
• Height [mm]: 60
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 16.8
• Test Mark: R90 Homologated
• Width [mm]: 105.8
• Height [mm]: 46
• Weight [kg]: 1.2
• Height 1 [mm]: 46
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Box
• WVA Number: 24348
• Packaging length [cm]: 16
• Packaging width [cm]: 10
• Packaging height [cm]: 8
• Number of threaded bolts: 4
• Manufacturer: JURID

• Diameter [mm]: 66
• Width [mm]: 29
• Tensioner Pulley Actuation: Automatic
• Name: SK VKM15260
• Manufacturer: SKF

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 20.5
• Test Mark: R90 Homologated
• Width [mm]: 155.1
• Height [mm]: 69.5
• Weight [kg]: 2
• Height 1 [mm]: 69.5
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• Supplementary Article/Info 2: with piston clip
• WVA Number: 23402, 23403
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• directional:
• Manufacturer: JURID

• Construction Year from: 01.2006
• Construction Year to: 11.2010
• Brake Caliper Type: for brake caliper with plastic piston
• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Height 1 [mm]: 69.6
• Width 2 [mm]: 156.3
• Height 2 [mm]: 70.7
• Thickness [mm]: 20.1
• Brake System: ATE
• Test Mark: E9 90R-02A1242/4466
• MAPP code available:
• Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 21
• Height 1 [mm]: 70
• Height 2 [mm]: 71
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Width 1 [mm]: 155
• Width 2 [mm]: 157
• WVA Number: 23738, 23739
• Name: BR P 59 043X
• Manufacturer: BREMBO

General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 24
• Number of Teeth 1: 146
• Manufacturer: SNR
• Name: SN KD453.26

• Driven Units: Camshaft
• Trim Level: HT -939A4000
• for OE number: 71775897
• Number of Teeth: 146
• Width [mm]: 24
• Length [mm]: 1,168
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.1
• Manufacturer: DAYCO
• Name: DA KTB562

• Construction Year to: 12.2010
• Number of Teeth: 146
• Length [mm]: 1,168
• Width [mm]: 24
• Number of track rollers: 2
• Manufacturer: BOSCH

• Belt Width [mm]: 24
• Belt Material: PTFE (polytetrafluoroethylene)
• Colour: black
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMA05260

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4995
• Observe technical data:
• Manufacturer: GATES

• Width [mm]: 24
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Weight [kg]: 1.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Length [mm]: 1,168
• Width [mm]: 24
• Number of Teeth: 146
• Manufacturer: JP GROUP
• Lisainfo: Timing Belt Kit
• Additional information: Timing Belt Kit

• Width [mm]: 24
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Weight [kg]: 1.03
• Observe service information:
• Name: SW 40 92 7825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.36
• Number of Teeth: 146
• Width [mm]: 24
• Manufacturer: CONTITECH

• Number of Teeth 1: 146
• Width 1 [mm]: 24
• Water Pump Type: for v-ribbed belt use
• Manufacturer: BUGATTI

• Engine Code: 939 A4.000
• Number of ribs: 146
• Length [mm]: 1,168
• Width [mm]: 24
• Number of Teeth: 146
• Manufacturer: MAGNETI MARELLI

• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 24
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC05260-1

• Construction Year to: 12.2010
• Length [mm]: 1,168
• Number of Teeth: 146
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Pulleys contained: 2
• Manufacturer: BOSCH
• Name: BS 1987948800

• Number of Teeth: 146
• Width [mm]: 24
• Number of belts: 1
• Weight [kg]: 1.94
• for article number: O263
• Manufacturer: DOLZ
• Name: DO KD162

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4995
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES
• Lisainfo: KP15603XS GAT
• Additional information: KP15603XS GAT

• Number of Teeth 1: 146
• Width 1 [mm]: 24
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: LU 530072430
• Manufacturer: INA

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 146
• Weight [kg]: 1.949
• Width [mm]: 24
• Manufacturer: CONTITECH