• Switch Pressure [bar]: 0.3
• Housing Colour: black
• Number of pins: 1
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Operating Mode: Hydraulic
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN
• Lisainfo: 206 957 HP
• Additional information: 206 957 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECT-PL-007
• Manufacturer: NTY
• Name: NTY ECT-PL-007

• Length [mm]: 63
• Housing Colour: green
• Spanner Size: 19
• Manufacturer: KAMOKA

• Length [mm]: 63
• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Thread Size: M 12x1,5
• Colour: green
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Engine Code: 939 A7.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46554621
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Passive sensor
• for OE number: 9118368
• Manufacturer: KAMOKA

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: 939 A7.000
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: 939 A7.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.233K, 1.880.115, 1.880.179, 1.880.180, 1.880.405, 1.880.411, 1.880.572, 1.880.580, 1.880.581, 1.880.582, 1.880.585, 1.880.639, 1.880.660, 1.880.669, 1.880.670, 1.880.673, 1.880.675

• Construction Year to: 01.2008
• Number of pins: 2
• Housing Colour: green
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 939 A7.000
• Construction Year to: 07.2008
• Number of pins: 2
• Name: Lliti,sidurdamine(Mootorijuhtimine)
• Manufacturer: MAX

• Housing Colour: green
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Length [mm]: 63
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Screw length below head [mm]: 27
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.2008
• for OE number: 55 190 791
• Length [mm]: 62
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 939 A7.000
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: 939 A7.000
• Construction Year to: 07.2008
• Operating Mode: Mechanical
• Name: LšLITI,SIDURDAMINE(GRA)
• Manufacturer: EPS

• Length [mm]: 63
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Screw length below head [mm]: 27
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 92 8378

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Active sensor
• for OE number: 46432103
• Manufacturer: KAMOKA
• Additional information: 108-014-375
• Lisainfo: 108-014-375

Fabrication Number: ECP-AR-003

• Operating Mode: Mechanical
• Number of pins: 2
• Fitting Position: Footwell
• Housing Colour: grey
• Weight [kg]: 0.011
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

Manufacturer: FAST

• Fabrication Number: ECP-PL-011
• Manufacturer: NTY

• Engine Code: 939 A7.000
• Name: EP 1.953.379
• Manufacturer: EPS

• Construction Year to: 12.2008
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• for article number: 87256E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 01.2008
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.09
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Engine Code: 939 A7.000
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Construction Year to: 12.2008
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Construction Year to: 12.2008
• Number of pins: 3
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 470
• Alternatively:
• Number of pins: 3
• Resistor [Ohm]: 970
• Alternative Repair Kit: 550426
• Fitting Depth [mm]: 37
• Manufacturer: ERA

• Length [mm]: 720
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Weight [kg]: 0.068
• Alternative Repair Kit: 550057
• Manufacturer: ERA

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11077

• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Engine Code: 939 A7.000
• Length [mm]: 720
• Name: EP 1.953.355
• Manufacturer: EPS

Manufacturer: FAST

• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Construction Year to: 10.2007
• Housing Type: with housing
• Fabrication Number: EPP-PL-006

• Length [mm]: 755
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year to: 12.2008
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Construction Year from: 11.2007
• Housing Type: with housing
• Number of pins: 4
• Fabrication Number: EPP-AR-004
• Manufacturer: NTY

• Length [mm]: 770
• Number of connectors: 3
• Cable Length [mm]: 720
• Weight [kg]: 0.07
• Name: SW 70 92 8386
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.2008
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.09
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• for OE number: 51782033
• Manufacturer: KAMOKA

• Construction Year from: 12.2007
• Construction Year to: 12.2008
• Weight [kg]: 0.24
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV165

• for OE number: 11140004
• Manufacturer: KAMOKA

• Construction Year to: 11.2007
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-PL-009
• Manufacturer: NTY

• Fabrication Number: ESL-HY-513
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: Front, before catalytic converter, after catalytic converter

• Construction Year to: 10.2007
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.25
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV096

• Construction Year to: 11.2007
• Number of pins: 4
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2008
• Number of pins: 4
• Manufacturer: DELLO AUTOMEGA

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 401
• Name: DE ES21127-12B1
• Manufacturer: DELPHI

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Construction Year to: 12.2008
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Alternatively:
• Number of pins: 4
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA

• Engine Code: 939 A7.000
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.276
• Manufacturer: EPS

• Construction Year to: 11.2007
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Construction Year from: 11.2007
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: 939 A7.000
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.394
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 10.2007, 11.2007
• Block Separation:
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year to: 2008
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe
• Exhaust System: after catalytic converter
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Construction Year to: 12.2008
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Overall Length [mm]: 625
• Name: Lambda andur
• Manufacturer: BOS

• Required quantity: 1
• Construction Year to: 10.2007
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Construction Year from: 11.2007
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe
• Construction Year to: 12.2008
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Number of pins: 6
• Manufacturer: FAE

• Construction Year to: 01.2008
• Number of pins: 4
• Connector Shape: oval
• Sensor Type: Hot-film Sensor
• Voltage [V]: 12
• Length [mm]: 108
• Width [mm]: 125
• Height [mm]: 108
• Weight [kg]: 0.25
• Name: OHUMASSIMOOTJA
• Manufacturer: VAL