• Construction Year to: 11.2016
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: BOS

• Engine Code: F1AE3481G
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-FT-007
• Number of pins: 3
• Voltage [V]: 12

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 11.2016
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Outer Diameter [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.025
• Name: SW 33 10 5510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 11.2016
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX
• Lisainfo: 21-0313
• Additional information: 21-0313

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Fabrication Number: ECS-CT-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550734
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Construction Year to: 11.2016
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: Andur,kompressorirohk
• Manufacturer: MAX

• Material: Plastic
• Number of connectors: 3
• Weight [kg]: 0.021
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fabrication Number: ECS-FT-001
• Manufacturer: NTY

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Manufacturer: FAST

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168651

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of connectors: 3
• Material: Plastic
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Construction Year to: 07.2014
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year to: 11.2016
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of connectors: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Name: CE 17SKV667
• Manufacturer: ESEN SKV

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.021
• for OE number: 51908411
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 99,000
• Manufacturer: NRF

• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: oval
• Number of pins: 3
• for OE number: 51 855 119
• Weight [kg]: 0.024
• Vehicle Equipment: for vehicles with diesel soot filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Engine Code: F1AE3481G
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 1
• Name: DE DPS00007
• Manufacturer: DELPHI

• for OE number: 55211656
• Number of pins: 2
• Socket colour: white
• Fabrication Number: EGT-FT-019
• Cable Length [mm]: 510
• Manufacturer: NTY

• for OE number: 55215116
• Number of pins: 2
• Socket colour: black
• Fabrication Number: EGT-FT-020
• Cable Length [mm]: 315
• Manufacturer: NTY

• for OE number: 51825699
• Number of pins: 2
• Fabrication Number: EGT-FT-022
• Cable Length [mm]: 260
• Manufacturer: NTY

• Supplementary Article/Info 2: with plug
• Conductor Number: 5
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

Manufacturer: MAGNETI MARELLI

• Engine Code: F1AE3481G
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 0
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• Housing Type: with housing
• Fabrication Number: EPP-AR-007
• Manufacturer: NTY

Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Supplementary Article/Supplementary Info: with seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 11.2016
• Manufacturer: BOSCH

• Number of pins: 3
• Manufacturer: FAST

• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Manufacturer: SKV GERMANY

• Thread Size: M18X1.5
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,000
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST

• Number of pins: 4
• Fabrication Number: EPP-FT-004
• Manufacturer: NTY

• for OE number: 51831050
• Manufacturer: KAMOKA

• Construction Year to: 11.2016
• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Name: CE 17SKV619
• Manufacturer: ESEN SKV

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 2 [mm]: 10
• Diameter 1 [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: F1AE3481G
• Sensor Type: Inductive Sensor
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 11.2016
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• for model code: 250, 290
• Construction Year from: 12.2012, 05.2014
• Construction Year to: 12.2014, 11.2016
• Block Separation:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• for model code: 250, 290
• Construction Year to: 12.2014, 11.2016
• Transmission Type: Semi-automatic
• Block Separation:
• Construction Year from: 05.2014
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: MAX

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Construction Year to: 11.2016
• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Number of pins: 3
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Voltage [V]: 12
• Cable Length [mm]: 510
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.1
• Operating Mode: Electric
• Manufacturer: SKV GERMANY
• Name: CE 30SKV216

• Voltage [V]: 12
• Cable Length [mm]: 315
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Operating Mode: Electric
• Manufacturer: SKV GERMANY
• Name: CE 30SKV184

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fitting Position: after catalytic converter
• Cable Length [mm]: 260
• Number of pins: 2
• Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Construction Year from: 01.2014
• Thread Size: M14x1,5
• Cable Length [mm]: 315
• Socket colour: black
• Fitting Position: after catalytic converter
• Manufacturer: FAE

• Exhaust System: before soot particulate filter
• Weight [kg]: 0.115
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Mixture Formation: Common Rail (CR)
• Manufacturer: FAST

• Construction Year from: 01.2013
• Pressure [Pa] to: 93,000
• Number of pins: 3
• Manufacturer: FAE

• Cable Length [mm]: 500
• Warranty: 5 years warranty
• Fitting Position: after soot particulate filter
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 315
• Number of pins: 2
• Socket colour: black
• Manufacturer: FAST

• Fitting Position: after soot particulate filter
• Cable Length [mm]: 510
• Number of pins: 2
• Socket colour: white
• Manufacturer: FAST

• Length [mm]: 96
• Vehicle Equipment: for vehicles with start-stop function
• Manufacturer: FAST

• Cable Length [mm]: 305
• Warranty: 5 years warranty
• Fitting Position: before soot particulate filter
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 360
• Manufacturer: DELPHI
• Name: DE ES21314-12B1

• Number of connectors: 3
• Manufacturer: ERA

• Engine Code: F1AE3481G
• Housing Type: with housing
• Length [mm]: 90
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.483
• Manufacturer: EPS

• Production number to: 12421975
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Manufacturer: MAGNETI MARELLI

• Recommended additional repairs: Air Filter
• Manufacturer: FAST

• Transmission Type: Semi-automatic
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• for model code: 250
• Construction Year to: 12.2014
• Transmission Type: Manual Transmission
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Exhaust System: after soot particulate filter
• Manufacturer: METZGER

• Construction Year from: 01.2014
• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 80
• Supplementary Article/Supplementary Info: without gasket/seal
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET358095201
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Pressure to [bar]: 1,800
• Thread Size: M18X1,5
• Quality: OE EQUIVALENT
• Name: Andur,ktuserohk
• Manufacturer: MD

• Exhaust System: before soot particulate filter
• Manufacturer: METZGER

• for facelift:
• Production date to: 16.04.2015
• Vehicle Equipment: for vehicles without top speed regulation
• Number of pins: 6
• Manufacturer: METZGER

• Required quantity: 1
• Construction Year from: 01.2014
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.083
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for model code: 250, 290
• Construction Year to: 12.2014, 11.2016
• Transmission Type: Semi-automatic
• Block Separation:
• Construction Year from: 05.2014
• Recommended additional repairs: Air Filter
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Construction Year to: 11.2016
• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS