• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor, Active sensor
• Manufacturer: KAMOKA

• Number of pins: 4
• Fabrication Number: ECM-FT-000
• Manufacturer: NTY

• Construction Year to: 12.2010
• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV499

• Pressure from [kPA]: 10
• Pressure to [kPA]: 11
• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Colour: black
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Engine Code: 188 A4.000
• Engine Number from: 2939662
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Engine Code: 188 A4.000
• Engine Number to: 2939661
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Construction Year to: 12.2012
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.2
• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECM-FT-004
• Manufacturer: NTY

• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Engine Number from: 2939662
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. FIAT 500 1,4 02-
• Manufacturer: BRM

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV107

Manufacturer: FAST

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: MAX

• Construction Year to: 12.2010
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV108

• Voltage [V]: 5
• Pressure [bar]: 1
• Number of pins: 4
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Pressure from [kPA]: 33
• Pressure to [kPA]: 370
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV156

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Construction Year to: 12.2012
• Number of pins: 4
• Connector Shape: oval
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• for OE number: 77364869, 95512846
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2012
• for OE number: 77364869
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Construction Year to: 12.2012
• for OE number: 55242637
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2012
• for OE number: 55240726
• Number of pins: 4
• Name: Andur,kompressorirohk
• Manufacturer: MAX

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Construction Year to: 12.2012
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Number of pins: 2
• Manufacturer: FAST

• Engine Number to: 2939661
• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY

• Engine Code: 188 A4.000
• Engine Number to: 2939661
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: 188 A4.000
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Number to: 2939661
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11212

• Construction Year to: 12.2012
• for OE number: 46798367
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Construction Year to: 12.2012
• for OE number: 46798367
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Engine Number to: 2888157, 2939660
• Block Separation:
• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ESL-FT-000
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 310
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-FT-006
• Manufacturer: NTY

• Engine Number to: 2888157, 2939660
• Block Separation:
• Length [mm]: 52
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Number to: 2939661
• Voltage [V]: 12
• Corresponds to the original part in colour: anthracite
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163921

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2010
• Engine Number to: 2939661
• Engine Code: 188A4.000
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: 188 A4.000
• Engine Number from: 2939662
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Number from: 2939661
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10170

• Engine Number from: 2888158, 2939661
• Block Separation:
• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Number of pins: 4

• Construction Year to: 12.2012
• for OE number: 55240726
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor

• Thickness [mm]: 43.45
• Outer Diameter [mm]: 12.9
• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 006 153 47 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2012
• for OE number: 55240726
• Name: Andur,kompressorirohk
• Manufacturer: BOS

• Number of pins: 4
• Colour: black
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Engine Code: 188 A4.000
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.091
• Manufacturer: EPS

• Engine Number from: 2939662
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10226

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV122

• Construction Year to: 12.2012
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Lambda Sensor
• Emission Standard: Euro 5
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Construction Year to: 12.2012
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Emission Standard: Euro 4 (D4)
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 06.2010
• Engine Number from: 2888158
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Construction Year to: 06.2010
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Quantity: 1
• Block Separation:
• Cable Length [mm]: 310
• Manufacturer: DELPHI
• Name: DE ES20277-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter Additional information: "Tootja: DELPHI
BARCHETTA (183), 03.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BARCHETTA (183), 03.
(kvaliteediklass: PJ)"

• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 118,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400311
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2012
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: Euro 5
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2012
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: Euro 4 (D4)
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 06.2010
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Exhaust System: after catalytic converter
• Cable Length [mm]: 450
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.