Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 22
- Jämedus/Tugevus (mm): 3
- Manufacturer: 3RG
- Quantity per packing unit: 50
- Jämedus/Tugevus (mm): 3
-
Kaal (kg): 0,
001 -
Materjal: NBR
(Nitril- Butadien- Kautschuk) -
Siseläbimõõt [mm]: 12,
8 -
Välisläbimõõt [mm]: 22,
5 - Manufacturer: METALCAUCHO
- Engine Code: JJB
- Material: Nylon
- Thickness [mm]: 2
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 22
- Shape: A Shape
- Manufacturer: VICTOR REINZ
- Quantity per packing unit: 25
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 14.5
- Thickness [mm]: 2
- Shape: A Shape
- Material: Nylon
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Manufacturer: ELRING
- Quantity per packing unit: 25
- Material: Polyamid 6.6
- Thickness [mm]: 2
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 22
- Weight [kg]: 0
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 2
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 22
- Manufacturer: AJUSA
- Quantity per packing unit: 25
- Thickness [mm]: 3
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 22.4
- Weight [kg]: 0.006
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 2
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 22
- Material: Plastic
- Weight [kg]: 0.001
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 22.4
- Thickness [mm]: 3
-
Material: ACM
(Polyacrylate) - Shape: Asymmetrical
-
Alternative Repair Kit: 505.550,
505.540 - Manufacturer: ELRING
- Quantity per packing unit: 10
-
Pikkus (mm): 16,
5 -
Kaal (kg): 0,
035 -
Väliskeere [mm]: M14x1,
5 - Kruvipea-/Mutriprofiil: Väliskuuskant
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: METALCAUCHO
-
Thread Size: M14x1,
5 - Length [mm]: 16
-
Additionally required articles (article numbers): 241.250.100,
891.760.100 - Manufacturer: FA1 FISCHER
-
Thread Size: M14x1,
5 - Length [mm]: 16
- Supplementary Article/Info 2: with seal ring
- Alternatively:
- Manufacturer: FA1
-
Thread Size: M14x1,
5 - Length [mm]: 22
- Supplementary Article/Info 2: with seal ring
- Name: FI 256850
- Manufacturer: FA1
- Construction Year from: 05.1998
- Material: Steel
- Length [mm]: 35
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
-
Thread Size: M14 x 1,
75 - for OE number: 1013938
- Manufacturer: DELLO AUTOMEGA
- Length [mm]: 25
- Outer Diameter [mm]: 24
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 15
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Oiled
- Screw length below head [mm]: 16
- Weight [kg]: 0.035
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Keermemõõt: M14x1,
5x20 - Võtmekaugus: 13 mm
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Shape: A Shape
- Material: Nylon
- Alternatively:
-
Keermemõõt: M14 x 1,
50 - Manufacturer: 3RG
- Length [mm]: 25
- Outer Diameter [mm]: 24
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 15
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Oiled
- Screw length below head [mm]: 16
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 05.1998
- Length [mm]: 34.5
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 7
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Keermemõõt: M14x1.5
- Manufacturer: FAST
- Construction Year from: 05.1998
-
Pikkus (mm): 34,
5 - Välisläbimõõt [mm]: 28
-
Väliskeerme mõõde: M14 x 1,
5 - Keermepikkus (mm): 7
- Kvaliteet/klass: 5.8
- Võtmekaugus: 13
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Materjal: Metall
- Pealispind: fosfeeritud
- Kruvipikkus kruvipea all [mm]: 20
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Hooldusinfot jälgida:
- Manufacturer: ENERGY
- Construction Year from: 05.1998
- Length [mm]: 35
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 7
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
- Inner Diameter [mm]: 13
- Thickness [mm]: 3
- Alternatively:
-
Material: ACM
(Polyacrylate)
- Construction Year from: 05.1998
- Length [mm]: 34.5
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 7
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5x20 - Spanner Size: 13 mm
- Alternative Repair Kit: 505.540
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 34
-
Thread Size: M 14 x 1,
50 x 20 - Spanner Size: 13
- Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
- Name: COU 220112S
- Manufacturer: CORTECO
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Shape: A Shape
- Material: Nylon
- Manufacturer: FISCHER
- Quantity per packing unit: 100
- Inner Diameter [mm]: 13
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: FISCHER
- Quantity per packing unit: 100
- Inner Diameter [mm]: 13
- Thickness [mm]: 3
-
Material: ACM
(Polyacrylate)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 13
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) - Alternatively:
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks