Manufacturer: MAGNETI MARELLI

• for OE number: 5263219
• Manufacturer: SASIC

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Fitting Position: Throttle Housing
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: NGA
• Construction Year to: 12.1997
• Thread Size: 1/8-27NPT
• Spanner Size: 19
• Corresponds to the original part in colour: red
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: round
• Socket colour: light grey
• Thread Size: 3/8"-18NPTF
• Spanner Size: 24 mm
• for OE number: 6810428
• Manufacturer: MEAT&DORIA

• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAG

• Engine Code: NGA
• Construction Year to: 05.1998
• Thread Size: 3/818NPT
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year from: 11.1999
• Colour: grey
• Supplementary Article/Supplementary Info: with seal
• Connector type: ohne Gewinde
• Power [W]: 0.06
• Manufacturer: METZGER

• Construction Year to: 12.1997
• Number of pins: 2
• Housing Colour: black
• Thread Size: 1/8x27 NPTF
• Manufacturer: FAE

• Construction Year to: 05.1998
• Thread Size: 3/8" x 18 NPT
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: white
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: NGA
• Construction Year from: 11.1999
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Height [mm]: 34
• Resistor [Ohm]: 500
• Number of connectors: 2
• Manufacturer: VERNET

• Fabrication Number: ECT-FR-001
• Manufacturer: NTY
• Name: NTY ECT-FR-001

• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 988F 9B989 BB
• Manufacturer: MEAT&DORIA

• Engine Code: NGD, NGB
• Length [mm]: 34
• Number of connectors: 2
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: DELPHI

• Engine Code: NGA
• Construction Year from: 05.1998
• Construction Year to: 11.1999
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Construction Year to: 04.1998
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 1001591
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 2
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• for OE number: 1 071 403
• Number of pins: 3
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Engine Code: NGA
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 3
• Weight [kg]: 0.03
• Manufacturer: ENERGY

• Construction Year from: 05.1998
• Number of pins: 3
• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: grey
• Thread Size: 3/8x18 NPTF
• Manufacturer: FAE

• Number of pins: 3
• Fitting Position: Throttle Housing
• Connector Shape: oval
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Fitting Depth [mm]: 34
• Housing Colour: black
• Weight [kg]: 0.034
• Resistor [Ohm]: 430
• Manufacturer: ERA

• Number of connectors: 3
• Weight [kg]: 0.018
• for OE number: 1 071 403
• Name: Andur,drosselklapiasend
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.018
• for OE number: 1 071 403
• Name: SW 50 10 3689
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Construction Year from: 06.1998
• Colour: blue
• Cable Length [mm]: 400, 530
• Transmission Type: Manual Transmission
• Fabrication Number: ESL-FR-002
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Construction Year to: 05.1998
• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 460
• Number of pins: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-FR-006
• Manufacturer: NTY

• Construction Year to: 05.1998
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Thread Size: 3/8x18 NPTF
• Spanner Size: 25 mm
• Tightening Torque [Nm]: 30
• Number of connectors: 2
• Fitting Depth [mm]: 26
• Manufacturer: BERU BY DRIV

• Construction Year to: 05.1998
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 710
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Construction Year from: 06.1998
• Length [mm]: 400
• Number of connectors: 4
• Manufacturer: VERNET

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Construction Year from: 06.1998
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 375
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Additional information: ES20025-12B1 DELPHI
• Lisainfo: ES20025-12B1 DELPHI

• Number of circuits: 4
• Lambda Sensor: Planar probe
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.1998
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: NGA
• Construction Year from: 05.1998
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Construction Year from: 08.1998
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV101

• Construction Year from: 08.1998
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: NGA, NGB, NGC, NGD
• Cable Length [mm]: 390
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
GALAXY (WGR), 03.95-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
GALAXY (WGR), 03.95-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: NGB
• Voltage [V]: 12
• Length [mm]: 770
• Number of circuits: 4
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV003

• Construction Year from: 08.1998
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 393
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV048

• Construction Year to: 05.1998
• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 630
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.1997
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: NGA
• Cable Length [mm]: 720
• Manufacturer: DELPHI
• Name: DE ES20252-12B1

• Construction Year from: 05.1998
• Weight [kg]: 0.27
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV175

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 670
• for article number: 81029E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: NGB, NGC, NGD
• Construction Year from: 08.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 511
• Available as universal article as well, see article no.: 0258005729
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Engine Code: NGA
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year from: 1998
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.094
• for OE number: CA09-18-861
• Name: SW 33 10 3762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.1998
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 400
• Exhaust System: before catalytic converter
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066251

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Finger probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 430
• Number of pins: 4
• Weight [kg]: 0.129
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.1998
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Engine Code: NGA, NGB, NGC, NGD
• Cable Length [mm]: 400
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 06.1998
• Number of pins: 6
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Engine Code: NGA
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 05.1998
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Engine Code: NGA
• Cable Length [mm]: 339
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20318-12B1

• Construction Year from: 08.1998
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Heated, Regulating Probe
• Cable Length [mm]: 400
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 06.1998
• Number of pins: 6
• Connector Shape: rectangular
• Housing Type: with housing
• Housing material: Plastic
• for OE number: 1054420
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 01.1997
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 710
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAG

• Engine Code: NGA
• Construction Year from: 05.1998
• for OE number: 1053108, 1035595
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 460
• Number of pins: 4
• Weight [g]: 101
• Gross Weight [g]: 131
• Manufacturer: DENSO
• Name: DN DOX-1371
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO II SEDAN (BFP
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO II SEDAN (BFP
(kvaliteediklass: Q)"

• Engine Code: NGB, NGC, NGD
• Construction Year from: 08.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.1998
• Number of pins: 4
• Connector Shape: rectangular
• Housing Type: with housing
• Housing material: Aluminium
• for OE number: 6848047
• Manufacturer: DELLO AUTOMEGA

• Housing Type: with housing
• Number of pins: 6
• Housing material: Plastic
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 05.1998
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Construction Year from: 05.1998
• Engine Code: NGA
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Planar probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 750
• Number of pins: 4
• Weight [kg]: 0.151
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: with housing
• Number of pins: 4
• Housing material: Aluminium
• Connector Shape: rectangular
• Supplementary Article/Info 2: with seal ring
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 05.1998
• Lambda Sensor: Regulating Probe
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Construction Year from: 05.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: purple
• Number of circuits: 4
• Lambda Sensor: Heated, Thread pre-greased
• Connector Shape: round
• Cable Length [mm]: 240
• Thread Size: M18 x 1,5
• Weight [kg]: 0.12
• for OE number: 2S6A 9G444 BA
• Length [mm]: 300
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.