• Veljed: metallvelje jaoks
• Võtmekaugus: 19
• Sisekeere (mm): M 12 x 1,5
• Rattakinnitus: koonus F
• OE-numbri jaoks: 1470843
• Manufacturer: DELLO AUTOMEGA

• Veljed: metallvelje jaoks
• Jämedus/Tugevus (mm): 15
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,02
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: FE27413
• Lisainfo: FE27413

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: metallvelje jaoks
• Jämedus/Tugevus (mm): 15
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,02
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, Esisild
• OE-numbri jaoks: 1 470 843
• Sisekeere (mm): M12 x 1,5
• Võtmekaugus: 19
• Jämedus/Tugevus (mm): 15
• Kvaliteet/klass: 10
• Kaal (kg): 0,021
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Veljed: metallvelje jaoks
• Jämedus/Tugevus (mm): 15
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,02
• Hooldusinfot jälgida:
• Manufacturer: SWAG
• Lisainfo: 50 92 7413 SWA
• Additional information: 50 92 7413 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides, Rear Axle both sides
• Thickness [mm]: 15
• Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Rims: for steel rims
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Wheel Fastening: Conical Seat F
• Fitting Position: Front Axle, Rear Axle
• Spanner Size: 19
• Quality/ Grade: 10
• Manufacturer: FAST

• Pikkus (mm): 46
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 26
• Kvaliteet/klass: 10.9
• Eesvõll, käigukast [mm]: 13
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Kruvipikkus kruvipea all [mm]: 42
• Kruvide-/Mutrite teostus: Rändelbolzen
• Voldi läbimõõt [mm]: 13
• Poldipea Ø ( mm ): 19
• Kaal (kg): 0,04
• Name: RATTAPOLDID
• Manufacturer: FEB
• Additional information: FE32307
• Lisainfo: FE32307

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 26
• Kvaliteet/klass: 10.9
• Eesvõll, käigukast [mm]: 13
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Kruvipikkus kruvipea all [mm]: 42
• Kruvide-/Mutrite teostus: Rändelbolzen
• Voldi läbimõõt [mm]: 13
• Poldipea Ø ( mm ): 19
• Kaal (kg): 0,04
• Name: Rattapoldid
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 26
• Kvaliteet/klass: 10.9
• Eesvõll, käigukast [mm]: 13
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Kruvipikkus kruvipea all [mm]: 42
• Kruvide-/Mutrite teostus: Rändelbolzen
• Voldi läbimõõt [mm]: 13
• Poldipea Ø ( mm ): 19
• Kaal (kg): 0,04
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• Material: Steel
• Surface: Zink flake coated
• Thread Length [mm]: 26
• Bolt Head Ø [mm]: 19
• Shaft Length [mm]: 13
• Screw length below head [mm]: 42
• Knurl Diameter [mm]: 13
• Manufacturer: FAST

• Veljed: kergemetallvelgede jaoks, metallvelje jaoks
• Jämedus/Tugevus (mm): 31
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: kroomitud
• Piirangutega toode/piirangu info 2: koos kaanega
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,06
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: F29463
• Lisainfo: F29463

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: kergemetallvelgede jaoks
• Jämedus/Tugevus (mm): 27,5
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: tsingitud
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,058
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: kergemetallvelgede jaoks
• Jämedus/Tugevus (mm): 27,5
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: tsingitud
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,058
• Hooldusinfot jälgida:
• Manufacturer: SWAG
• Name: SW 50 90 7176
• Lisainfo: 50 90 7176 SWA
• Additional information: 50 90 7176 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: kergemetallvelgede jaoks, metallvelje jaoks
• Jämedus/Tugevus (mm): 31
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: kroomitud
• Piirangutega toode/piirangu info 2: koos kaanega
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,06
• Hooldusinfot jälgida:
• Manufacturer: SWAG
• Name: SW 50 92 9463
• Lisainfo: 50 92 9463 SWA
• Additional information: 50 92 9463 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: kergemetallvelgede jaoks
• Jämedus/Tugevus (mm): 27,5
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: tsingitud
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,058
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljed: kergemetallvelgede jaoks, metallvelje jaoks
• Jämedus/Tugevus (mm): 31
• Välisläbimõõt [mm]: 28
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 10
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: kroomitud
• Piirangutega toode/piirangu info 2: koos kaanega
• Installatsiooni pool: Tagasild, Esisild
• Kaal (kg): 0,06
• Hooldusinfot jälgida:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: FE46674
• Lisainfo: FE46674

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sisekeere (mm): M12 x 1,5
• Rattakinnitus: koonus F
• Installatsiooni pool: Tagasild, Esisild
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Kaal (kg): 0,06
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sisekeere (mm): M12 x 1,5
• Installatsiooni pool: Tagasild, Esisild
• Võtmekaugus: 19
• Jämedus/Tugevus (mm): 31
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Kvaliteet/klass: 8
• Kaal (kg): 0,057
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 1 678 260
• Installatsiooni pool: Tagasild, Esisild
• Materjal: Metall
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Kvaliteet/klass: 10
• Pealispind: kroomitud
• Rattakinnitus: koonus F
• Piirangutega toode/piirangu info 2: koos kaanega
• Hooldusinfot jälgida:
• Seerianumber: KSP-FR-000
• Manufacturer: NTY

• Jämedus/Tugevus (mm): 26
• Välisläbimõõt [mm]: 23,7
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 8
• Võtmekaugus: 17, 19
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: kroomitud
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,26
• lukustatav: lukustatav
• OE-numbri jaoks: M115
• Name: RATTAMUTTER
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 26
• Välisläbimõõt [mm]: 23,7
• Sisekeermemõõde: M12 x 1,5
• Kvaliteet/klass: 8
• Võtmekaugus: 17, 19
• Rattakinnitus: koonus F
• Materjal: Metall
• Pealispind: kroomitud
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,26
• OE-numbri jaoks: M115
• lukustatav: lukustatav
• Manufacturer: SWAG
• Name: SW 81 92 7057
• Lisainfo: 81 92 7057 SWA
• Additional information: 81 92 7057 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Kvaliteet/klass: 10,9
• Keermepikkus (mm): 26
• Väliskeere [mm]: M12 x 1,5
• Hulk: 16
• Veljed: metallvelje jaoks
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.