Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Rims: for steel rims
- Length [mm]: 51
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 26
- Quality/ Grade: 10.9
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 26
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.073
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for steel rims
- Length [mm]: 51
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 26
- Quality/ Grade: 10.9
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 26
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.073
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 31
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Supplementary Article/Info 2: with lid
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: FEBI
- Additional information: F29463
- Lisainfo: F29463
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 31
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Supplementary Article/Info 2: with lid
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: SWAG
- Name: SW 50 92 9463
- Lisainfo: 50 92 9463 SWA
- Additional information: 50 92 9463 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 31
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Supplementary Article/Info 2: with lid
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: FE46674
- Lisainfo: FE46674
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Internal Thread [mm]: M12 x 1,
5 - Wheel Fastening: Conical Seat F
-
Fitting Position: Rear Axle,
Front Axle - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0.06
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Internal Thread [mm]: M12 x 1,
5 -
Fitting Position: Rear Axle,
Front Axle - Spanner Size: 19
- Thickness [mm]: 31
- Bolt Head-/Nut Design: Male Hex
- Quality/ Grade: 8
- Weight [kg]: 0.057
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1 678 260
-
Fitting Position: Rear Axle,
Front Axle - Material: Steel
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Quality/ Grade: 10
- Surface: Chromed
- Wheel Fastening: Conical Seat F
- Supplementary Article/Info 2: with lid
- Observe service information:
-
Fabrication Number: KSP-
FR- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Length [mm]: 56.5
- Outer Diameter [mm]: 23.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 30
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Lockable: Lockable
- Observe dimensions:
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- Lockable: Lockable
- for OE number: M115
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 56.5
- Outer Diameter [mm]: 23.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 30
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Lockable: Lockable
- Observe dimensions:
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- for OE number: M115
- Lockable: Lockable
- Name: SW 81 92 7057
- Manufacturer: SWAG
- Lisainfo: 81 92 7057 SWA
- Additional information: 81 92 7057 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks