Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Weight [kg]: 0.059
- Packaging length [cm]: 4
- Packaging width [cm]: 3.2
- Packaging height [cm]: 3.2
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle
- Height [mm]: 195
- Required quantity: 2
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E30/36/E3
- Fitting Position: Front Axle
- Weight [kg]: 0.06
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Upper,
Front - Weight [kg]: 0.134
- Packaging length [cm]: 5.7
- Packaging width [cm]: 4
- Packaging height [cm]: 4
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Height [mm]: 195
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E30/36/E3
- Fitting Position: Rear Axle
- Weight [kg]: 0.159
- Packaging length [cm]: 26.7
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Manufacturer: FEBEST
- Suspension: for vehicles with standard suspension
- Construction Year to: 04.2001
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top eye,
Bottom eye - Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: MAX
for OE number: 1128540, 1128570, 1134702, 1C15-18080-FA, 1C15-18080-GA, 4099143, 4099144, 4109774, 4109775, 4333502, V1C151-8080-BA, VYC15-18080-BB, VYC15-18080-CA, YC15-18080-DG, YC15-18080-FG, YC15-18080-VA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top eye -
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: SRL
FORD TRANSIT 00-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
FORD TRANSIT 00-
(kvaliteediklass: PJ)"
- Construction Year from: 03.2000
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Max. Length [mm]: 508
- Manufacturer: FAST
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Suspension: for vehicles with standard suspension
- Max. Length [mm]: 610
- Manufacturer: FAST
- Suspension: for vehicles with standard suspension
- Check OE number:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top eye - replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Construction Year from: 03.2000
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: KYB
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
- Parameter: SE27X240A
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Name: AMORT
- Manufacturer: SAA
for OE number: 1128540, 1128570, 1134702, 1C15-18080-FA, 1C15-18080-GA, 4099143, 4099144, 4109774, 4109775, 4333502, V1C151-8080-BA, VYC15-18080-BB, VYC15-18080-CA, YC15-18080-DG, YC15-18080-FG, YC15-18080-VA SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Check OE number:
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Fitting Position: Front Axle
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
- Parameter: SE27X240A
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Replace in pairs only:
- Name: AMORT
- Manufacturer: SAA
- Lisainfo: 230 964
- Additional information: 230 964
SVHC: No information available, please contact the manufacturer!
- Vehicle type: LPG
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: SRL
FORD TRANSIT 00-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
FORD TRANSIT 00-
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Vehicle type: Transit 330
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top eye,
Bottom eye - Weight [kg]: 2
- Bore Ø [mm]: 25
- Length 1 [mm]: 370
- Length 2 [mm]: 610
- Piston Rod Diameter [mm]: 12.4
- Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Suspension: for vehicles with standard suspension
- Check OE number:
- Quantity per axle: 1
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Yoke - Length 1 [mm]: 576
- Length 2 [mm]: 386
- Diameter [mm]: 58
- Stanchion Tube Diameter [mm]: 12
- Observe technical data:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 03.2000
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: JAPKO
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube -
Name: BI 19-
164786 - Manufacturer: BILSTEIN
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
FORD TRANSIT 00-
(kvaliteediklass: Q)"
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
691900 - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
- Construction Year from: 03.2000
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: KYB
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 714 641 0016,
714 641 0004 - replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Parameter: SFE36/
25X190A2 - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Vehicle type: LPG
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Top eye,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
- Name: Gas shock absorber
- Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
-
Fitting Position: Front Axle Right,
Front Axle Left - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Suspension: for vehicles with standard suspension
- Max. Length [mm]: 575
- Manufacturer: FAST
- Fitting Position: Front Axle
- Vehicle type: Transit 330
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 5.8
- Bore Ø [mm]: 35
- Length 1 [mm]: 377
- Length 2 [mm]: 568
- Piston Rod Diameter [mm]: 25
-
Article number of recommended accessories: MK201,
PK189 - Packaging length [cm]: 57.5
- Packaging width [cm]: 20.3
- Packaging height [cm]: 20.3
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Vehicle type: LPG
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube -
Name: BI 22-
227997 - Manufacturer: BILSTEIN
- Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"