• Production date from: 200712
• Production date to: 201107
• Fitting Position: Rear Axle
• Length [mm]: 55
• Weight [kg]: 0.075
• Packaging length [cm]: 5.6
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Front Axle
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MAX

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Front Axle
• Name: Puhver, vedrustus
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-MZ-011
• Manufacturer: NTY

• Fitting Position: Rear Axle, Lower
• Required quantity: 2
• Name: Remondikomplekt,ootshoob
• Manufacturer: TED

• Fitting Position: Front Axle
• Required quantity: 2
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fitting Position: Front Axle

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Weight [kg]: 0.053
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Fitting Position: Front Axle
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: TED

• Construction Year from: 01.2006
• Fitting Position: Rear Axle
• Bellows Material: Thermoplast
• Height [mm]: 238
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1223834
• Fitting Position: Front Axle
• Height [mm]: 250
• Material: Thermoplast
• Weight [g]: 85
• Diameter 1 [mm]: 71
• Diameter 2 [mm]: 62
• Name: IM 37013
• Manufacturer: ORIGINAL IMPERIUM

• Required quantity: 2
• Fitting Position: Front Axle
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 62
• Height [mm]: 67
• Manufacturer: TEDGUM
• Name: TG TED56210

• Suspension: for vehicles without height-adjustable suspension
• Fitting Position: Rear Axle

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Rear Axle
• Length [mm]: 123
• Weight [kg]: 0.092
• Packaging length [cm]: 12.3
• Packaging width [cm]: 5.8
• Packaging height [cm]: 5.8
• Manufacturer: FEBEST

• Thread Size: M12x1.75
• Screw length below head [mm]: 85
• Manufacturer: ZZVF

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Front Axle
• Weight [kg]: 0.067
• Packaging length [cm]: 6.3
• Packaging width [cm]: 6.3
• Packaging height [cm]: 6.1
• Manufacturer: FEBEST

• Length [mm]: 241
• Inner Diameter [mm]: 72, 65
• Fitting Position: Front Axle
• Weight [kg]: 0.17
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Length [mm]: 114
• Width [mm]: 58.55
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.09
• Name: Puhver, vedrustus
• Manufacturer: FEB
• Additional information: FE103823
• Lisainfo: FE103823

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Length [mm]: 114
• Width [mm]: 58.55
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.09
• Name: SW 50 10 3823
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Name: TG TED49083
• Manufacturer: TEDGUM

• Suspension: for vehicles with standard suspension
• Length [mm]: 67.5
• Width [mm]: 64.14
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Front Axle
• Weight [kg]: 0.125
• Packaging length [cm]: 24
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Name: CFD PK1001
• Manufacturer: DACO

• Fitting Position: Rear Axle both sides, Lower, Rear, inner
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Supplementary Info: with attachment material
• Required quantity: 2
• Quality/ Grade: 10.9
• Thread Length [mm]: 26
• Screw length below head [mm]: 85
• Spanner Size: 19
• Thread Size: M12x1.75
• Surface: Zinc-coated
• Outer Diameter [mm]: 33
• Name: Rattakalde korrektuurkruvi
• Manufacturer: TED

• Thread Size: M12x1.75
• Screw length below head [mm]: 85
• Supplementary Article/Info 2: with groove, with protect screen
• Manufacturer: ZZVF

• Production date from: 200712
• Production date to: 201107
• Length [mm]: 100
• Weight [kg]: 0.126
• Packaging length [cm]: 9.9
• Packaging width [cm]: 3.3
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-2696
• Additional information: 72-2696

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-2439
• Additional information: 72-2439

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• for OE number: BP4K-34-0A5B
• Manufacturer: KAMOKA

Fitting Position: Rear Axle

• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Height [mm]: 122
• Required quantity: 2
• Weight [kg]: 0.085
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Production date from: 200712
• Production date to: 201107
• Fitting Position: Rear Axle
• Length [mm]: 90
• Weight [kg]: 0.082
• Packaging length [cm]: 11.4
• Packaging width [cm]: 5.8
• Packaging height [cm]: 5.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• for OE number: 1309147
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Rear Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
FOCUS II SEDAN (DA/)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FOCUS II SEDAN (DA/)
(kvaliteediklass: PJ)"

• Engine Code: KKDA
• Construction Year to: 01.2006
• Suspension: for vehicles with standard suspension
• Block Separation:
• Length [mm]: 450
• Width [mm]: 53
• Material: PU (Polyurethane), Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.268
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 142
• Component Number: 4
• Name: IM 50272
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle, Lower, Rear, inner
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Supplementary Info: with attachment material
• Required quantity: 1
• Quality/ Grade: 10.9
• Thread Length [mm]: 26
• Screw length below head [mm]: 85
• Spanner Size: 19
• Outer Diameter [mm]: 33
• Thread Size: M12x1.75
• Surface: Zinc-coated
• Name: Rattakalde korrektuurkruvi
• Manufacturer: TED

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY
• Lisainfo: 7147400006
• Additional information: 7147400006

• Fitting Position: Rear Axle
• Name: CFD PK1003
• Manufacturer: DACO

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: 910026 KYB
• Lisainfo: 910026 KYB

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0135

• Production date from: 200712
• Production date to: 201107
• Weight [kg]: 0.184
• Packaging length [cm]: 11.1
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• for OE number: 1305329
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0101

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for OE number: BP4K340A5B
• Weight [kg]: 0.3
• Warranty: 5 years warranty
• Packaging length [cm]: 9.5
• Packaging width [cm]: 30
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Production date from: 200712
• Production date to: 201107
• for model code: CB4
• Fitting Position: Front Axle
• Weight [kg]: 0.36
• Packaging length [cm]: 23.3
• Packaging width [cm]: 15.1
• Packaging height [cm]: 7.7
• Manufacturer: FEBEST

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• for OE number: 1370318
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-104
• Additional information: D5104
• Lisainfo: D5104

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: OPTIMAL ZAWIESZENIE

• Suspension: for vehicles with sports suspension
• Length [mm]: 114
• Width [mm]: 58
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.064
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWT-FR-000SKK
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: BIL

• Engine Code: KKDA
• Construction Year from: 01.2006
• Suspension: for vehicles with sports suspension
• Block Separation:
• Length [mm]: 240
• Width [mm]: 58
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.26
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.