• Fitting Position: Left Front
• Model Year from: 2007
• Fabrication Number: EDS-FR-011
• paired article number: EDS-FR-012
• Manufacturer: NTY

• Fitting Position: Right Front
• Fabrication Number: EDS-FR-012
• paired article number: EDS-FR-011
• Manufacturer: NTY

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Colour: grey
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 08.2008
• Fitting Position: inner, Front
• Fabrication Number: EPDC-FR-000
• Manufacturer: NTY
• Name: NTY EPDC-FR-000

• Construction Year to: 09.2010
• Fitting Position: Left Front
• Section: Outer section
• paired article number: ZVXY-ZS-017R

• Construction Year to: 08.2008
• Fitting Position: outer, Front
• Fabrication Number: EPDC-FR-007

• Construction Year from: 09.2008
• Fitting Position: inner, Rear, Front, outer, both sides
• Fabrication Number: EPDC-FR-006

• Construction Year to: 09.2010
• Fitting Position: Right Front
• Section: Outer section
• paired article number: ZVXY-ZS-017L

• Fitting Position: Front
• Fabrication Number: EPDC-FR-010
• Manufacturer: NTY

• Fitting Position: Front, Centre
• Production date from: 01.09.2008
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• Production date to: 01.09.2008
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• Construction Year to: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Fitting Position: both sides
• Number of pins: 3
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Connector Shape: oval

• Construction Year to: 09.2008
• Fitting Position: outer, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Front
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP039

• Construction Year from: 09.2010
• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP102
• Manufacturer: MAGNETI MARELLI

• Fitting Position: inner, Front
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: outer, Rear, Front
• Construction Year from: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: inner, Left, Right, Rear, Front
• Construction Year from: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Construction Year from: 09.2010
• Construction Year to: 03.2012
• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: MAG

• Fitting Position: outer, Front
• Construction Year to: 09.2008
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Fitting Position: Rear
• Construction Year to: 09.2008
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Colour: black
• Name: Sensor, parkimisabi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 09.2010
• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: MAG

• Fitting Position: inner, Front
• Construction Year to: 09.2008
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front, inner
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Construction Year to: 08.2008
• Quantity: 2
• Fitting Position: outer, Front, Rear
• Number of pins: 3
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Connector Shape: angled

• Fitting Position: outer, Front
• Construction Year to: 09.2008
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: outer, Rear, Front
• Construction Year from: 09.2010, 09.2008
• Construction Year to: 03.2012
• Block Separation:
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: inner, Front
• Construction Year from: 09.2008
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Height [mm]: 6
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: Rear, inner
• Construction Year from: 09.2010
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Manufacturer: TOPRAN
• Lisainfo: 304 777 HP
• Additional information: 304 777 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front and Rear
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: Rear
• Diameter [mm]: 16
• Manufacturer: FAST

• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• Fitting Position: Front, Rear
• for OE number: 8A6J 15K859 AA
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Fitting Position: outer, Rear, Front
• Construction Year from: 09.2010
• Construction Year to: 03.2012
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Fitting Position: Front

• Construction Year from: 09.2008
• Fitting Position: inner, Left, Right, Front
• Quantity: 2
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.31
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: Left Front, Right Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Height [mm]: 5.9
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: inner, Front, Rear
• Number of pins: 3
• Manufacturer: FAE

• Fitting Position: Front, inner
• Number of pins: 3
• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 09.2008
• Quantity: 2
• Fitting Position: inner, Left, Right, Front, Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, outer, Rear
• Production date from: 01.09.2008, 06.09.2010
• Block Separation:
• Production date to: 07.03.2012
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: METZGER

• Construction Year from: 09.2010
• Quantity: 2
• Fitting Position: inner, Left, Right, Front, Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.017
• Manufacturer: VEMO
• Lisainfo: V25-72-0102 VEM
• Additional information: V25-72-0102 VEM

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date to: 01.09.2008
• Fitting Position: Front, inner
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Construction Year to: 09.2008
• Fitting Position: Front, outer
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2010
• Fitting Position: Front, inner, Left, Right, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 29.2
• Number of pins: 3
• Diameter [mm]: 16.1
• Weight [kg]: 0.03
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL

• Construction Year from: 09.2010
• Fitting Position: outer, inner, Left, Right, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: not paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Weight [kg]: 0.03
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL
• Additional information: 890011 VALEO
• Lisainfo: 890011 VALEO

• Construction Year from: 09.2010
• Required quantity: 2
• Fitting Position: both sides, inner, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PX358141281

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2008
• Required quantity: 2
• Fitting Position: both sides, inner, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Weight [kg]: 0.015
• Fitting Position: Front, inner
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Fitting Position: Rear

• Name: Bumper reinforcement
• Quality class: P

Lisainfo: MONDEO, 03.07- (kvaliteediklass PJ)