• Quantity per packing unit: 50
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Thickness [mm]: 15
• Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Rims: for steel rims
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 11.2012
• Block Separation:
• Rims: for steel rims
• Spanner Size: 19
• Wheel Fastening: Conical Seat F
• for OE number: 1470843
• Thread Size: M 12 x 1,5
• Manufacturer: DELLO AUTOMEGA

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 11.2012
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 11.2012
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: FE27413
• Lisainfo: FE27413

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 11.2012
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zink-nickel coated
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.022
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 11.2012
• Block Separation:
• Rims: for steel rims
• Spanner Size: 19
• Wheel Fastening: Conical Seat F
• for OE number: 5114405
• Thread Size: M 12 x 1,5
• Manufacturer: DELLO AUTOMEGA

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 11.2012
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zink-nickel coated
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.022
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Wheel Fastening: Conical Seat F
• Fitting Position: Front Axle, Rear Axle
• Spanner Size: 19
• Quality/ Grade: 10
• Manufacturer: FAST

• Engine Code: SPJC, SPJA, RTJA
• Block Separation:
• Quantity per packing unit: 25
• Fitting Position: Rear Axle, Front Axle
• for OE number: 1 470 843
• Internal Thread [mm]: M12 x 1,5
• Spanner Size: 19
• Thickness [mm]: 15
• Quality/ Grade: 10
• Weight [kg]: 0.021
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 46
• Material: Steel
• Surface: Zink flake coated
• Thread Length [mm]: 26
• Bolt Head Diameter [mm]: 19
• Shaft Length [mm]: 13
• Screw length below head [mm]: 42
• Knurl Diameter [mm]: 13
• Manufacturer: FAST

• Construction Year to: 06.2012
• Length [mm]: 41
• Weight [kg]: 0.038
• Thread Size: M12x1,5
• Packaging length [cm]: 4.1
• Packaging width [cm]: 4.1
• Packaging height [cm]: 1.8
• Manufacturer: FEBEST

• Engine Code: RTJA, SPJA
• Construction Year to: 06.2012
• Length [mm]: 46
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 26
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Surface: Zink flake coated
• Screw length below head [mm]: 42
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Diameter [mm]: 19
• Weight [kg]: 0.04
• Name: RATTAPOLDID
• Manufacturer: FEB
• Additional information: FE32307
• Lisainfo: FE32307

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 200807
• Fitting Position: Rear Axle, Front Axle
• Manufacturer: OYODO

• Engine Code: RTJA, SPJA
• Construction Year to: 06.2012
• Length [mm]: 46
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 26
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Surface: Zink flake coated
• Screw length below head [mm]: 42
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Diameter [mm]: 19
• Weight [kg]: 0.04
• Name: Rattapoldid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 201212
• Length [mm]: 46
• Thread Length [mm]: 26
• Name: Rattapoldid
• Manufacturer: MAX

• Quantity per packing unit: 10
• Length [mm]: 46.5
• Thread Size: M12 x 1,5
• Thread Length [mm]: 25.9
• Quality/ Grade: 10.9
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 6
• Fitting Position: Rear Axle, Front Axle
• Thickness [mm]: 31
• Weight [kg]: 0.063
• Internal Thread [mm]: M12 x 1,5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Surface: Chromed
• Manufacturer: METALCAUCHO

• Quantity per packing unit: 5
• Bolt Head Diameter [mm]: 19
• Screw length below head [mm]: 42
• Length [mm]: 46
• Weight [kg]: 0.04
• Knurl Diameter [mm]: 13
• External Thread [mm]: M12 x 1,5
• Quality/ Grade: 10.9
• Surface: Zink flake coated
• Thread Length [mm]: 26
• Manufacturer: METALCAUCHO

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: F29463
• Lisainfo: F29463

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 31
• Thread Size: M12 x 1,5
• Manufacturer: 3RG

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Lisainfo: 46674 FEBI
• Additional information: 46674 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 48
• Weight [kg]: 0.046
• Thread Size: M12x1,5
• Packaging length [cm]: 4.9
• Packaging width [cm]: 1.9
• Packaging height [cm]: 1.9
• Manufacturer: FEBEST

• Engine Code: SPJC, SPJA, RTJA
• Construction Year to: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Name: SW 50 92 9463
• Manufacturer: SWAG
• Lisainfo: 50 92 9463 SWA
• Additional information: 50 92 9463 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RTJA, SPJA
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 26.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zinc-coated
• Supplementary Article/Info 2: without lid
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB
• Additional information: NRF30249
• Lisainfo: NRF30249

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Name: SW 50 94 4949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, SPJE
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Name: Rattamutter
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RTJA, SPJA
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 26.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zinc-coated
• Supplementary Article/Info 2: without lid
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Name: SW 50 93 0249
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RTJA, SPJA
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 26.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Phosphatized
• Supplementary Article/Info 2: without lid
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJC, SPJA, RTJA
• Block Separation:
• Quantity per packing unit: 20
• Internal Thread [mm]: M12 x 1,5
• Wheel Fastening: Conical Seat F
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: SPJC, SPJA, RTJA
• Block Separation:
• Quantity per packing unit: 25
• Internal Thread [mm]: M12 x 1,5
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Thickness [mm]: 31
• Bolt Head-/Nut Design: Male Hex
• Quality/ Grade: 8
• Weight [kg]: 0.057
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 6
• Fitting Position: Rear Axle, Front Axle
• Thickness [mm]: 31
• Internal Thread [mm]: M 12 x 1,5
• Spanner Size: 19
• Wheel Fastening: Conical Seat F
• Manufacturer: METALCAUCHO

• Weight [kg]: 0.429
• Quantity: 10
• Packaging length [cm]: 6.6
• Packaging width [cm]: 6.6
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Quantity per packing unit: 10
• for OE number: 1 678 260
• Fitting Position: Rear Axle, Front Axle
• Material: Steel
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Quality/ Grade: 10
• Surface: Chromed
• Wheel Fastening: Conical Seat F
• Supplementary Article/Info 2: with lid
• Observe service information:
• Fabrication Number: KSP-FR-000
• Manufacturer: NTY

• Engine Code: SPJA
• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• Lockable: Lockable
• for OE number: M115
• Observe service information:
• Name: RATTAMUTTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: SPJA
• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• Lockable: Lockable
• for OE number: M115
• Name: SW 81 92 7057
• Manufacturer: SWAG
• Lisainfo: 81 92 7057 SWA
• Additional information: 81 92 7057 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• Quality/ Grade: 10,9
• Thread Length [mm]: 26
• External Thread [mm]: M12 x 1,5
• Quantity: 16
• Rims: for steel rims
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.