Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 100
- Thickness [mm]: 2
- Weight [kg]: 0.003
- Material: Copper
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Weight [g]: 3
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 25
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2.1
- Material: Copper
- Shape: A Shape
- Alternative Repair Kit: 505.540
- Manufacturer: ELRING
- Lisainfo: 108.502 ELR
- Additional information: 108.502 ELR
- Thickness [mm]: 2
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.05
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 6
- Weight [kg]: 0.02
-
Thread Size: M10x1,
25 - Weight [g]: 20
- Manufacturer: METALCAUCHO
-
Engine Code: TZJA,
TZJB, T3JA - Thickness [mm]: 2
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Manufacturer: AJUSA
- Height [mm]: 2
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.004
- Manufacturer: BLUE PRINT SILNIK
- Quantity per packing unit: 5
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 13
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 10
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Screw length below head [mm]: 11
- Sealing Ring Diameter [mm]: 20
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 10
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Screw length below head [mm]: 11
- Sealing Ring Diameter [mm]: 20.4
- Weight [kg]: 0.2
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M10x1,
25x13 - Spanner Size: 21 mm
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
- Engine Code: TZJA
- Material: Steel
- Length [mm]: 35
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
-
Thread Size: M14 x 1,
75 - for OE number: 1013938
- Manufacturer: DELLO AUTOMEGA
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Additionally required articles (article numbers): 746.520.100
- Manufacturer: FA1
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ENERGY
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Alternative Repair Kit: 877.930
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Outer Diameter [mm]: 20.5
- Inner Diameter [mm]: 10.2
- Thickness [mm]: 2
- Material: Copper
- Packing Type: Blister Pack
- Name: COU 005696S
- Manufacturer: CORTECO
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 10 x 1,
25 x 12, 5 - Length [mm]: 18
- Packing Type: Blister Pack
- Spanner Size: 21
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
- Engine Code: TZJA
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: TZJA
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: TZJA
- Length [mm]: 35
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: TZJA
- Length [mm]: 34.5
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 7
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: ENERGY
- Engine Code: TZJA
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Name: SW 50 92 1096
- Manufacturer: SWAG
- Lisainfo: 50 92 1096 SWA
- Additional information: 50 92 1096 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: TZJA
- Length [mm]: 20
- Outer Diameter [mm]: 25
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 17
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Surface: Coated
- Screw length below head [mm]: 17
- Weight [kg]: 0.116
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FA1 FISCHER
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FIS
Name: PODKADKA,USZCZELKA MIEDZIANA CU 10,00 X 21,00 X 2,00 (OPAKOWANIE 100 SZT.)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks