• Switch Pressure [bar]: 0.3
• Housing Colour: black
• Number of pins: 1
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• Thread Size: M 14x1,5
• Colour: black
• Number of pins: 1
• Switch Pressure [bar]: 0.35
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with seal
• for OE number: 1535416
• Manufacturer: DELLO AUTOMEGA

• Spanner Size: 19
• for OE number: 55190791
• Manufacturer: KAMOKA

• Fabrication Number: ECT-PL-007
• Name: NTY ECT-PL-007
• Manufacturer: NTY

• Engine Code: 312 A1.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.42
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER
• Additional information: WS2633
• Lisainfo: WS2633

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 312 A3.000
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: brown
• Weight [kg]: 0.024
• for OE number: 55190791
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 312 A3.000
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: brown
• Weight [kg]: 0.024
• for OE number: 55190791
• Name: SW 70 10 6570
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000

• Engine Code: 312 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55190791
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Housing Colour: green
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI

• Construction Year from: 01.2009
• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Name: CE 17SKV499
• Manufacturer: ESEN SKV

Fabrication Number: ESS-FT-002

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Thread Size: M12x1,5

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 312 A1.000, 312 A3.000
• Block Separation:
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Engine Code: 312 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

• Engine Code: 312 A1.000
• Required quantity: 1
• Manufacturer Restriction: CLASSICLINE
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Construction Year from: 01.2009
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Version: 1
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. FIAT 500 1,4 02-
• Manufacturer: BRM

• Alternatively:
• Number of pins: 2
• Resistor [Ohm]: 900
• Alternative Repair Kit: 550306
• Fitting Depth [mm]: 34.5
• Manufacturer: ERA

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Height [mm]: 34.5
• Resistor [Ohm]: 600
• Number of connectors: 2
• Manufacturer: VERNET

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: 312 A1.000
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

Manufacturer: FAST

• Quantity: 1
• Block Separation:
• Version: 2
• Number of pins: 3
• Name: DE SS12295-12B1
• Manufacturer: DELPHI

• Length [mm]: 34
• Number of connectors: 2
• Weight [kg]: 0.44
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 312 A1.000
• Required quantity: 1
• Name: EP 1.957.006
• Manufacturer: EPS

• Required quantity: 1
• Vehicle type: 500
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11179

• Required quantity: 1
• Vehicle type: 500
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Fabrication Number: ESL-AR-002

Fitting Position: Front, before catalytic converter, after catalytic converter Transmission Type: 5-Speed Manual Transmission, automatically operated, 5-Speed Automatic Transmission Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Fabrication Number: ESL-FT-004
• Name: NTY ESL-FT-004
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Engine Code: 312 A1.000
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Vehicle type: 500
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Engine Code: 312 A1.000, 312 A3.000
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 350
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Construction Year to: 02.2016
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Engine Code: 312 A1.000, 312 A3.000
• Construction Year to: 02.2016
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• not for emission standard: Euro 6
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Transmission Type: not for sequential manual transmission, Sequential Manual Transmission Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20302-12B1

• Construction Year from: 12.2009
• Engine Code: 312A1.000,312A3.000, 312B4.000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: 312 A1.000
• Voltage [V]: 12
• Length [mm]: 610
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV054
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 800
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: 312 A1.000, 312 A3.000
• Construction Year to: 02.2016
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• not for emission standard: Euro 6
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 312 A1.000
• Fitting Position: after catalytic converter
• Transmission Type: 5-Speed Manual Transmission
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 630
• Resistor [Ohm]: 9
• Cable Length [mm]: 630
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 650
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV638
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle type: 500
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 312 A1.000, 312 A3.000
• Construction Year to: 02.2016
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• not for emission standard: Euro 6
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter Transmission Type: not for sequential manual transmission, Sequential Manual Transmission

• Exhaust System: for pre-catalytic converter
• for OE number: 46751082
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2006

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: 312 A1.000, 312 A3.000, 312 B4.000
• Construction Year to: 02.2016
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 6
• Transmission Type: Sequential Manual Transmission
• Block Separation:
• Construction Year from: 03.2016
• Number of circuits: 4
• Overall Length [mm]: 795
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 312 A1.000, 312 A3.000
• Construction Year to: 02.2016
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• not for emission standard: Euro 6
• Transmission Type: not for sequential manual transmission
• Number of circuits: 4
• Overall Length [mm]: 630
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 312 A1.000, 312 A3.000, 312 B4.000
• Construction Year to: 02.2016
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Block Separation:
• Construction Year from: 03.2016
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 07.2012
• Construction Year to: 09.2015
• Engine Code: 312A3.000
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: 312 A1.000, 312 A3.000
• Construction Year to: 02.2016
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• not for emission standard: Euro 6
• Transmission Type: Sequential Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 850
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH