• Fabrication Number: ESL-FT-004
• Manufacturer: NTY
• Name: NTY ESL-FT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• for OE number: 46750243
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Weight [g]: 122
• Gross Weight [g]: 155
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)"

• Engine Code: 199 A8.000
• Thread Size: M14x1.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Engine Code: 199 A8.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Manufacturer: FACET

• Pressure [bar]: 0.3
• Thread Size: M 14 x 1,5
• for OE number: 1535416
• Manufacturer: MEAT&DORIA

• Engine Code: 199 A8.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: EP 1.800.096
• Manufacturer: EPS

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Fabrication Number: ECT-PL-007
• Manufacturer: NTY
• Name: NTY ECT-PL-007

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90000
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

Manufacturer: FAST

• Pressure [bar]: 0.35
• Thread Size: M14 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55190791
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Manufacturer: MAGNETI MARELLI
• Name: MM SAA101

• Thread Size: M12x1.5
• Manufacturer: VERNET
• Additional information: WS2633
• Lisainfo: WS2633

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY
• Name: NTY ECP-AR-000

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV499
• Manufacturer: ESEN SKV

• Engine Code: 199 A8.000
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.3326K, 7.8672, 7.8699, 7.8701, 7.8758, 7.8938
• Manufacturer: FACET

• Construction Year from: 10.2009
• for OE number: 55 190 791
• Length [mm]: 62
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 199 A8.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.326
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

• Construction Year from: 10.2009
• Number of pins: 2
• Housing Colour: green
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380451
• Manufacturer: HELLA

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Height [mm]: 34.5
• Resistor [Ohm]: 600
• Number of connectors: 2
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: 199 A8.000
• Operating Mode: Mechanical
• Manufacturer: FACET

Manufacturer: NRF

• Resistor [Ohm]: 900
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 34.5
• Alternative Repair Kit: 550306
• Manufacturer: ERA

• Engine Code: 199 A8.000
• Operating Mode: Mechanical
• Name: EP 1.810.226
• Manufacturer: EPS

• Engine Code: 199 A8.000
• Manufacturer: FACET

• Engine Code: 199 A8.000
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 46798368
• Manufacturer: MEAT & DORIA

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Engine Code: 199 A8.000
• Name: EP 1.953.377
• Manufacturer: EPS

Manufacturer: FAST

• Engine Code: 199 A8.000
• Manufacturer: FACET

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550305
• Manufacturer: ERA

• Engine Code: 199 A8.000
• Name: EP 1.957.006
• Manufacturer: EPS

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11179

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Manufacturer: OYODO

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10168

• Number of connectors: 3
• Manufacturer: JPN

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Manufacturer: BOSCH
• Name: BS 0232103097

• Manufacturer: BOSCH
• Name: BS 0261210238

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without cable
• Manufacturer: VDO

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: 199 A8.000
• Name: EP 1.953.619
• Manufacturer: EPS

• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253847

• Oxygen Sensor: Diagnostic Probe, Oxygen Sensor
• Engine Code: 199 A8.000
• Voltage [V]: 12
• Length [mm]: 610
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258006206

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20302-12B1

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Model Year to: 2010
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 430
• Weight [kg]: 0.084
• Name: SW 33 10 3140
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066141
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 310
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 3.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV595

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 300
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Conductor Number: 4
• Length [mm]: 350
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 350
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Length [mm]: 630
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 630
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM067

• Engine Code: 199 A8.000
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 650
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV638
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986615

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Name: DE ES20303-12B1
• Manufacturer: DELPHI

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 630
• Number of connectors: 4
• Manufacturer: VERNET

• Exhaust System: for pre-catalytic converter
• for OE number: 46751082
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2006

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"