• Installatsiooni pool: Esisild
• Piduriketta liik: sisemine õhutus
• Välisläbimõõt [mm]: 259
• Pidurikettajämedus [mm]: 23
• Aukude arv: 4
• Pealispind: kaetud
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Vehicle Equipment: for vehicles with two-wheel steering
• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Height [mm]: 48.7
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 260
• Centering Diameter [mm]: 64.1
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Hub Height [mm]: 39
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Braking/Drive Dynamics: for vehicles with ABS
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Height [mm]: 48.8
• Centering Diameter [mm]: 64.1
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Construction Year from: 01.1992
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0100/0035
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 64
• Height [mm]: 48.5
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Height [mm]: 48.5
• Rim Hole Number: 4
• Weight [kg]: 3.75
• Brake Disc Type: solid
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Vehicle Equipment: for vehicles with two-wheel steering
• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 49
• Outer Diameter [mm]: 260
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 64
• Weight [kg]: 3.94
• Name: PIDURIKETAS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with two-wheel steering
• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 48.6
• Outer Diameter [mm]: 260
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 64
• Weight [kg]: 3.94
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 92
• Height [mm]: 34.2
• Outer Diameter [mm]: 259.7
• Brake Disc Thickness [mm]: 23
• Minimum thickness [mm]: 21
• Number of bores: 4
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Disc Type: solid
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Height [mm]: 48.8
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 64.1
• Hole Arrangement/Number: 04/09
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 12.2
• Weight [kg]: 3.8
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 23
• Height [mm]: 34
• Minimum thickness [mm]: 21
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 92
• Hole Arrangement/Number: 04/04
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 8.4
• Weight [kg]: 4.8
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 23
• Minimum thickness [mm]: 21
• Height [mm]: 34
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Type: Vented, internally vented
• Centering Diameter [mm]: 92.03
• Number of Holes: 4
• Surface: Oiled
• Fulfils ECE norm: ECE-R90
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 49
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 260
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 108
• Name: BR 08.5803.10
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 260
• Height [mm]: 34
• Brake Disc Thickness [mm]: 23
• Minimum thickness [mm]: 21
• Centering Diameter [mm]: 92
• Bolt Hole Circle Ø [mm]: 114
• Number of Holes: 4
• Brake Disc Type: Vented
• Thread Size: M10x1,25
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 259
• Brake Disc Thickness [mm]: 23
• Minimum thickness [mm]: 21
• Centering Diameter [mm]: 92
• Height [mm]: 34
• Number of Holes: 4
• Thread Size: M10 x 1.25
• Bolt Hole Circle Ø [mm]: 114.3
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0176/0706
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Height [mm]: 49
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 64
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 3.7
• Hole Arrangement/Number: 8/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Disc Type: solid
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Height [mm]: 48.8
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 64.1
• Hole Arrangement/Number: 04/09
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 3.8
• Name: HE 8DD355105311
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 259.5
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 48.7
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Type: solid
• Centering Diameter [mm]: 64.13
• Number of Holes: 4
• Surface: Oiled
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 12.7
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 48.7
• Centering Diameter [mm]: 64.1
• Inner Diameter [mm]: 155
• Bore Ø [mm]: 12.8
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/0682
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 23
• Number of Holes: 4
• Height [mm]: 34
• Centering Diameter [mm]: 92
• Outer Diameter [mm]: 259
• Minimum thickness [mm]: 21
• Tightening Torque [Nm]: 108
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Disc Type: solid
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 10
• Height [mm]: 48.8
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 64.1
• Hole Arrangement/Number: 04/09
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 12.2
• Weight [kg]: 3.8
• Name: PIDURIKETAS
• Manufacturer: TEX

• Fitting Position: Front Axle
• Rim Size [inch]: 14.0
• Outer Diameter [mm]: 260
• Brake Disc Thickness [mm]: 23
• Minimum thickness [mm]: 21
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 34
• Centering Diameter [mm]: 92
• Inner Diameter [mm]: 160
• Thread Size: M10x1,25
• Test Mark: E1 90R-02C0115/0455
• Manufacturer: ATE