Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Thread Size: ZG1/
8 - Spanner Size: 27 MM
- Switch Pressure [bar]: 0.3
- Manufacturer: ASHIKA
- Engine Code: J30A1
- Manufacturer Restriction: DENSO
- Pressure to [bar]: 0.35
- Pressure from [bar]: 0.25
- Pressure [bar]: 0
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: EP 1.800.015
- Manufacturer: EPS
- Switch Pressure [bar]: 0.3
-
Thread Size: 1/
8x28 BSPT -
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 1
- Spanner Size: 12
-
Thread Size: 1/
8 - for OE number: 553621201
- Manufacturer: NRF
- Colour: black
- Manufacturer Restriction: Denso
- Pressure [bar]: 2.5
- Housing Colour: black
-
Thread Size: R1/
8 - Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: DE SW90004
- Pressure [bar]: 0.4
-
Thread Size: 1/
8 GAS - Technical Information Number: circuit N.C.
- Manufacturer: ERA
-
Thread Size: 1/
8 GAS - Manufacturer: ERA
- Length [mm]: 41
- Spanner Size: 13
- Number of connectors: 1
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 41
- Spanner Size: 13
- Number of connectors: 1
- Weight [kg]: 0.02
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Bolted,
Plug- in connection - Voltage [V]: 12
-
Resistor [Ohm]: 628,
73 - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: 1/
8 GAS - Spanner Size: 13
- Sensor Type: NTC Sensor
- Number of pins: 1
- Housing Colour: black
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107641
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Thread Size: M12x1.5
- Connector Shape: round
- Manufacturer: CALORSTAT BY VERNET
- Thread Size: M12x1.5
- Manufacturer: CALORSTAT BY VERNET
-
for OE number: 37880-
P0A- A02 -
Thread Size: M12x1,
5 mm - Number of pins: 2
- Connector Shape: round
- Weight [kg]: 0.03
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 17SKV688
-
Thread Size: M12 x 1,
5 - Manufacturer: ERA
- Construction Year to: 08.2002
- Manufacturer: BOSCH
- Engine Code: J30A1
- Manufacturer Restriction: MATSUSHITA
- Housing Colour: black
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: white
- Name: EP 1.830.198
- Manufacturer: EPS
- Number of pins: 2
- Colour: white
-
Corresponds to the original part in colour: white,
black - Supplementary Article/Supplementary Info: with seal
- Power [W]: 0.06
- Manufacturer: METZGER
- Engine Code: J30A1
- Manufacturer Restriction: MATSUSHITA
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: MEYLE
-
Lambda Sensor: Lambda Sensor,
Thread pre- greased -
Fabrication Number: ESL-
UV- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Construction Year to: 12.2000
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Technical Information Number: Universal
- Overall Length [mm]: 315
- Number of pins: 3
- Lambda Sensor: Regulating Probe
- Manufacturer: JAPKO
- Construction Year to: 12.2000
- Fitting Position: Front
-
Thread Size: M18 x 1,
5 - Socket colour: black
- Number of circuits: 4
- Connector Shape: angular
- Number of pins: 4
- Weight [kg]: 0.111
-
for OE number: 36531-
PK3- A05 - Cable Length [mm]: 460
- Length [mm]: 360
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.12
- Warranty: 3 years warranty
- Name: CE 09SKV121
- Manufacturer: ESEN SKV
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 147
- Manufacturer: DENSO
-
Lisainfo: DOX-
0109 DENSO -
Additional information: DOX-
0109 DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
- Construction Year from: 07.1998
- Construction Year to: 08.1999
-
Exhaust System: for pre-
catalytic converter - Cable Length [mm]: 389
-
Lambda Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20322-
12B1 -
Additional information: ES20322-
12B1 DELPHI -
Lisainfo: ES20322-
12B1 DELPHI
- Lambda Sensor: Diagnostic Probe
- Construction Year from: 01.2001
- Construction Year to: 08.2002
- Exhaust System: after catalytic converter
- Voltage [V]: 12
- Weight [kg]: 0.06
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV094
- Manufacturer: ESEN SKV
- Exhaust System: before catalytic converter
- Construction Year to: 09.2000
- Lambda Sensor: Regulating Probe
- Length [mm]: 425
- Number of connectors: 4
- Manufacturer: VERNET
- Construction Year from: 09.2000
- Construction Year to: 08.2002
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986507
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
-
Exhaust System: for pre-
catalytic converter -
for OE number: 36532-
P5A- 003 - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 480
- Number of pins: 4
- Weight [g]: 106
- Gross Weight [g]: 139
- Manufacturer: DENSO
-
Name: DN DOX-
1459
Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year to: 08.2000
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986602
- Construction Year to: 08.2000
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 500
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: oval
- Socket colour: grey
- Number of circuits: 4
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.118
- Length [mm]: 670
- for OE number: 36531 P5M 004
- Cable Length [mm]: 580
- Number of pins: 4
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 37870PJ7003
- Supplementary Article/Info 2: with seal ring