• for PR number: 1KY
• Fitting Position: Rear Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• for PR number: 1LD
• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• for PR number: 1KE
• Miinimumjämedus (mm): 8
• Piduriketta liik: täis
• Ava läbimõõt [mm]: 15,3
• Pidurikettajämedus [mm]: 9,7
• Ava Ø (mm): 112
• Aukude arv: 9
• Siseläbimõõt [mm]: 174,5
• Kõrgus (mm): 48,2
• Tsentri läbimõõt (mm): 65
• Välisläbimõõt [mm]: 272
• Manufacturer: DENCKERMANN HAMULCE
• Quantity per packing unit: 2

• for PR number: 1KE
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 9.7
• Brake Disc Type: solid
• Number of Holes: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 48.2
• Centering Diameter [mm]: 65
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

Article number of recommended accessories: 131-07-641, 131-07-642, 131-07-721, 131-07-722, 131-07-723, 131-07-724 General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• for PR number: 1KE
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Number of Holes: 9
• Rim Hole Number: 5
• Thread Size: 15,3
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 48.3
• Centering Diameter [mm]: 65
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0261
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• for PR number: 1KE
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 48.3
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: solid
• Centering Diameter [mm]: 65
• Number of Holes: 9
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.3
• Manufacturer: BOSCH
• Name: BS 0986479C20
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• for PR number: 1KE
• Quantity per packing unit: 2
• Height [mm]: 48.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 9
• Number of bores: 1
• Outer Diameter [mm]: 272
• Number of Holes: 9
• Centering Diameter [mm]: 65
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Name: SK VKBD90041S2
• Manufacturer: SKF

• for PR number: 1ZE
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 25
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: DELLO AUTOMEGA
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• for PR number: 1ZE
• Miinimumjämedus (mm): 22
• Piduriketta liik: õhutusega
• Ava läbimõõt [mm]: 15,3
• Pidurikettajämedus [mm]: 25
• Ava Ø (mm): 112
• Aukudearv 2: 9
• Aukude arv: 5
• Siseläbimõõt [mm]: 144
• Kõrgus (mm): 49,9
• Tsentri läbimõõt (mm): 65
• Välisläbimõõt [mm]: 288
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• for PR number: 1ZK
• Miinimumjämedus (mm): 22
• Piduriketta liik: õhutusega
• Ava läbimõõt [mm]: 15,3
• Pidurikettajämedus [mm]: 25
• Ava Ø (mm): 112
• Aukudearv 2: 9
• Aukude arv: 5
• Siseläbimõõt [mm]: 146
• Kõrgus (mm): 49,9
• Tsentri läbimõõt (mm): 65
• Välisläbimõõt [mm]: 312
• Manufacturer: DENCKERMANN HAMULCE
• Quantity per packing unit: 2

• for PR number: 1ZK
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 25
• Outer Diameter [mm]: 312
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: DELLO AUTOMEGA
• Quantity per packing unit: 2

• for PR number: 1KY
• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 48.5
• Outer Diameter [mm]: 310
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 65
• Weight [kg]: 7.04
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 48.4
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Hub Diameter [mm]: 150
• Weight [kg]: 6.8
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for PR number: 1ZE
• Fitting Position: Front Axle
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Brake Disc Type: Vented
• Number of Holes: 5
• Height [mm]: 49.9
• Centering Diameter [mm]: 65
• Bolt Hole Circle Ø [mm]: 112
• Test Mark: ECE R90
• Article number of recommended accessories: 131-07-139, 131-07-140
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0289/1665
• Surface: Oiled
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 65
• Height [mm]: 48.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3975

• for PR number: 1ZK
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 312
• Brake Disc Thickness [mm]: 25
• Brake Disc Type: Vented
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 49.9
• Centering Diameter [mm]: 65
• Test Mark: ECE R90
• Article number of recommended accessories: 131-07-139, 131-07-140
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KY
• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 49
• Outer Diameter [mm]: 310
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 65
• Weight [kg]: 7.04
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Height [mm]: 48.5
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: Vented
• Centering Diameter [mm]: 65
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.3
• Manufacturer: BOSCH
• Name: BS 0986479303
• Quantity per packing unit: 2

• for PR number: 1KY
• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 48.5
• Outer Diameter [mm]: 310
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 65
• Weight [kg]: 7.04
• Name: SW 30 92 4386
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 310
• Height [mm]: 48.3
• Centering Diameter [mm]: 65
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Number of Holes: 9
• Bolt Hole Circle Ø [mm]: 112
• Thread Size: 15,5
• Machining: High-carbon
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0185/0588
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

• Fitting Position: Front Axle
• for PR number: 1ZK
• Height [mm]: 49.5
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 22
• Number of bores: 5
• Outer Diameter [mm]: 312
• Number of Holes: 5
• Centering Diameter [mm]: 65
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Name: SK VKBD80006V1
• Manufacturer: SKF

• for PR number: 1LD
• Fitting Position: Front Axle
• Outer Diameter [mm]: 340
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 30
• Manufacturer: DELLO AUTOMEGA
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 48
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 310
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 120
• Manufacturer: BREMBO
• Name: BR 09.A200.11
• Quality class: Q

• for PR number: 1ZE
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 22
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• No. of holes 2: 9
• Height [mm]: 49.9
• Centering Diameter [mm]: 65
• Inner Diameter [mm]: 144
• Bolt Hole Circle Ø [mm]: 112
• Bore Diameter [mm]: 15.3
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0010
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• for PR number: 1KY, 1X0, 1X1
• for combined PR number: 1KD+0N4
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 49
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 20
• Weight [kg]: 6.8
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• for PR number: 1KE
• Quantity per packing unit: 2
• Piduriketta liik: täis
• Aukude arv: 9
• Piirangutega toode/piirangu info 2: koos kruvidega
• Välisläbimõõt [mm]: 272
• Pidurikettajämedus [mm]: 10
• Miinimumjämedus (mm): 8
• Tsentri läbimõõt (mm): 65
• Kõrgus (mm): 48
• Ava Ø (mm): 112
• Ava läbimõõt kuni [mm]: 15,3
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• for PR number: 1KY
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 48.5
• Minimum thickness [mm]: 20
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 169.4
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Weight [kg]: 7
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355128451
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• for PR number: 1ZK
• Brake Disc Type: Vented
• Outer Diameter [mm]: 312
• Height [mm]: 49.9
• Number of Holes: 9
• Brake Disc Thickness [mm]: 25
• Centering Diameter [mm]: 65
• Minimum thickness [mm]: 22
• Thread Size: 15,4
• Bolt Hole Circle Ø [mm]: 112
• Colour: black
• Surface: Painted
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: E190R-02 C0176/0613
• Manufacturer: TRW

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KY
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 48.5
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 169.4
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 12.5
• Weight [kg]: 7
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• for PR number: 1LD
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 49.7
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Hub Diameter [mm]: 156
• Weight [kg]: 10.74
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for PR number: 1LD
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 50
• Outer Diameter [mm]: 340
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 65
• Weight [kg]: 10.6
• Observe service information:
• Manufacturer: BLUEPRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1ZK
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 25
• Outer Diameter [mm]: 312
• Height [mm]: 49.7
• Machining: High-carbon
• Centering Diameter [mm]: 65
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Minimum thickness [mm]: 22
• Hole Arrangement/Number: 5/10
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Number of Holes: 5
• Machining: High-carbon
• Surface: Coated
• MAPP code available:
• No. of holes 2: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 48.5
• Centering Diameter [mm]: 65
• Inner Diameter [mm]: 169
• Bore Diameter [mm]: 15.3
• Test Mark: E1 90R-02C0118/0945
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• for PR number: 1ZK
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 312
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 22
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• No. of holes 2: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 49.9
• Centering Diameter [mm]: 65
• Inner Diameter [mm]: 146
• Bore Diameter [mm]: 15.3
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/1001
• Manufacturer: ATE

• for PR number: 1LD
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 49.7
• Outer Diameter [mm]: 340
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 65
• Weight [kg]: 10.6
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Kontrolltähistus: E1 90R-02C0289/1665
• Piduriketta liik: õhutusega
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: ilma ABS- anduriteta, ilma rattalaagrita
• Töötlus: töötlemata
• Välisläbimõõt [mm]: 310
• Pidurikettajämedus [mm]: 22
• Miinimumjämedus (mm): 20
• Tsentri läbimõõt (mm): 65
• Kõrgus (mm): 48
• Quality class: PJ
• Name: Brake discs

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 22
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 48.3
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 310
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 20
• Manufacturer: BREMBO
• Name: BR 09.A200.75

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• for PR number: 1LD
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 49.7
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: Vented
• Centering Diameter [mm]: 65
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.3
• Manufacturer: BOSCH
• Name: BS 0986479C90
• Lisainfo: 0986479C90 BOSCH
• Additional information: 0986479C90 BOSCH

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: Vented
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Number of Holes: 5
• Height [mm]: 49.7
• Centering Diameter [mm]: 65
• Bolt Hole Circle Ø [mm]: 112
• Thread Size: 15,3
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0176/0601
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

• Fitting Position: Front Axle
• for PR number: 1LD
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 50
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27
• Weight [kg]: 10.7
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• for PR number: 1LD
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 49.7
• Outer Diameter [mm]: 340
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 65
• Weight [kg]: 10.6
• Name: SW 30 93 9129
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0339/1622
• Surface: Coated
• Machining: High-carbon
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 65
• Height [mm]: 49.7
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG9109C
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 49.6
• Minimum thickness [mm]: 27
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 145
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Weight [kg]: 10.8
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355129241
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 50
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 340
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27
• Manufacturer: BREMBO
• Name: BR 09.C306.11
• Quantity per packing unit: 2

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Rear Axle
• for PR number: 1KY
• Quantity per packing unit: 2
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 48
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 310
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 20.5
• Tightening Torque [Nm]: 120
• Technical Information: ECE R 90 Homologation.
• Manufacturer: BREMBO
• Name: BR 09.A200.1X
• Quality class: Q

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Rear Axle
• for PR number: 1KY, 1X0, 1X1
• for combined PR number: 1KD+0N4
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 49
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 20
• Weight [kg]: 6.8
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 49.6
• Minimum thickness [mm]: 27
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 145
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Packaging length [cm]: 35.8
• Packaging width [cm]: 35.8
• Packaging height [cm]: 8.5
• Weight [kg]: 10.8
• Manufacturer: TEXTAR TARCZE HAMULCOWE
• Quantity per packing unit: 2
• Quality class: PJ
• Name: Brake discs

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• for PR number: 1LD
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• No. of holes 2: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 49.6
• Centering Diameter [mm]: 65
• Inner Diameter [mm]: 145
• Bore Diameter [mm]: 15.3
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0407
• Manufacturer: ATE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• for PR number: 1KY, 1X0, 1X1
• for combined PR number: 1KD+0N4
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 310
• Brake Disc Thickness [mm]: 22
• Height [mm]: 49
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• directional:
• Test Mark: ECE R90APPROVED
• Minimum thickness [mm]: 20
• Weight [kg]: 6.8
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for PR number: 1LD
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 50
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27
• Weight [kg]: 10.7
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for PR number: 1LD
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 9
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 50
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 340
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27.8
• Technical Information: ECE R 90 Homologation.
• Manufacturer: BREMBO
• Name: BR 09.C306.1X
• Quantity per packing unit: 2

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking. General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle Right
• for PR number: 1LD
• Brake Disc Type: internally vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 50
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• directional:
• paired article number: 600.3243.54
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27
• Weight [kg]: 10.7
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle Left
• for PR number: 1LD
• Brake Disc Type: internally vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 340
• Brake Disc Thickness [mm]: 30
• Height [mm]: 50
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• directional:
• paired article number: 600.3243.55
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27
• Weight [kg]: 10.7
• Hole Arrangement/Number: 10/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for PR number: 1LE
• Brake Disc Type: Vented, Perforated, two-part brake disc
• Quality: Alu-Topf schwimmend, Alu hub floating
• Machining: Alloyed/High-carbon
• Surface: Coated
• Outer Diameter [mm]: 370
• Brake Disc Thickness [mm]: 32
• Height [mm]: 50
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 65
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 30.4
• Weight [kg]: 12.1
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN