• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.8
• Height 1 [mm]: 67.1
• Width 1 [mm]: 103.8
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: WVA 20574/19.5
• Net weight [kg]: 1.22

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 36
• Inner Diameter [mm]: 6
• Height [mm]: 105
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)"

• Filter type: In-Line Filter
• Manufacturer Restriction: universal
• Height [mm]: 109
• Outer Diameter [mm]: 36
• Name: Ktusefilter
• Manufacturer: MAX

• Filter type: In-Line Filter
• Height [mm]: 106.5
• Outer Diameter [mm]: 35.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 6
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Height [mm]: 110
• Outer Diameter [mm]: 48
• Housing Type: Synthetic Material Housing
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Outer Diameter [mm]: 31.5
• Length [mm]: 140
• Width [mm]: 95
• Height [mm]: 142
• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 37
• Weight [kg]: 0.104
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Outer Diameter [mm]: 36
• Overall Length [mm]: 136
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 125
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• Engine Code: WA,WF
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/ Diameter 2 [mm]: IN/OUT: 8
• Manufacturer: JAPKO

• Height [mm]: 119
• Outer Diameter [mm]: 53
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 6.3
• Outlet Ø [mm]: 6.3
• Packaging length [cm]: 5.8
• Packaging width [cm]: 5.8
• Packaging height [cm]: 11.6
• Name: CH CFF100101
• Manufacturer: CHAMPION

• Height [mm]: 142
• Outer Diameter [mm]: 31.5
• Outer Diameter 1 [mm]: 37
• Outlet Ø [mm]: 6.5
• Inlet Ø [mm]: 8.4
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Construction Year to: 07.1978
• Filter type: In-Line Filter
• Diameter [mm]: 48
• Height [mm]: 117.5
• Inlet Ø [mm]: 7.2
• Outlet Ø [mm]: 7.2
• Manufacturer: BOSCH
• Name: BS F026403169

• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Manufacturer: KNECHT
• Name: KN KL15OF

• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: WA
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Construction Year to: 07.1978
• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Driven Units: Camshaft
• Trim Level: CR
• Number of Teeth: 121
• Width [mm]: 18
• Name: HAMMASRIHM
• Manufacturer: DAY

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Name: Hammasrihm
• Manufacturer: GAT

• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 24
• Outer Diameter [mm]: 72
• Manufacturer: KAMOKA

• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Mechanical
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 20.4
• Outer Diameter [mm]: 72
• Weight [kg]: 0.38
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Construction Year from: 08.1977
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.54
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Construction Year from: 08.1977
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.59
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Driven Units: Camshaft
• Surface: Smooth
• Material: Metal
• Outer Diameter [mm]: 70
• Width [mm]: 24
• Manufacturer: GATES

• Fitting Position: Rear Axle
• Width [mm]: 40
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Manufacturer: LPR

• Width [mm]: 26.6
• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: without accessories
• Height [mm]: 27.7
• Manufacturer: OPTIMAL

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Width [mm]: 40
• Brake System: Ate/Teves
• Inner brake drum diameter [mm]: 200
• Weight [kg]: 1.45
• Manufacturer: TOMEX BRAKES

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Number of belts: 1
• Pulleys contained: 1
• Number of Teeth: 121
• Width [mm]: 18
• Quick-change adapter diameter [mm]: 82.5
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• Height [mm]: 58.7
• Width [mm]: 76.7
• Thickness [mm]: 18.5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Width [mm]: 104.4
• Height [mm]: 66.5
• Thickness [mm]: 19.5
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 07.1978
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Brake Pad: with lining
• Brake Size: 200x400
• Manufacturer: BOSCH

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth 1: 121
• Manufacturer: SNR
• Name: SN KD457.01

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 121
• Width [mm]: 18
• Length [mm]: 1,153
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Manufacturer: DAYCO
• Name: DA KTB265

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth 1: 121
• Manufacturer: SNR
• Name: SN KD457.05

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Fitting Position: Rear Axle
• Manufacturer Restriction: VAG
• Test Mark: E1 90R 01195/047
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 07.1978
• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BOS

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Manufacturer Restriction: KELSEY HAYES
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 20887, 20888
• Test Mark: E1 90R-01813/030
• Length [mm]: 137.7
• Thickness [mm]: 19.7
• Height [mm]: 48.6
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.64
• Number of Teeth: 121
• Width [mm]: 18
• contains more articles than the OE kit (art. no.): 056 198 119
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Construction Year to: 07.1978
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 230
• Width [mm]: 40
• Brake Pad: with lining
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: BOS

• Number of Teeth: 121
• Width [mm]: 18
• Number of belts: 1
• Weight [kg]: 0.56
• for article number: KD122
• Manufacturer: DOLZ