Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Length [mm]: 390
- Brake System: TRW
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
brake pad wear -
Additional information: Sensor,
brake pad wear
-
for brake disc diameter [mm]: 318,
338 - Fitting Position: Front Axle
- Length [mm]: 283
- Brake System: ATE
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
brake pad wear -
Additional information: Sensor,
brake pad wear
- Fitting Position: Front Axle
- Brake Type: Disc Brake
-
Fabrication Number: HCZ-
AU- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
-
Fabrication Number: HCZ-
AU- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH -
Fitting Position: Front Axle Left,
only fitted on one side - Supplementary Article/Info 2: with cable
- Length [mm]: 290
- Brake Type: Disc Brake
- Wear Warning Contact: Change warning contact together with the pads
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 285
-
Fabrication Number: HCZ-
AU- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Brake Type: Disc Brake
- Fitting Position: Front Axle both sides
- General Information: spender wire; brake pad wear indicator
- Manufacturer: VIKA
-
for PR number: 1LJ,
1LL, 1ZA, 1ZC - Fitting Position: Front Axle
- Length [mm]: 405
- Brake Type: Disc Brake
- Wear Warning Contact: Change warning contact together with the pads
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Right,
only fitted on one side - Supplementary Article/Info 2: with cable
- Length [mm]: 390
- Brake Type: Disc Brake
- Wear Warning Contact: Change warning contact together with the pads
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Brake Type: Disc Brake
- Warning Contact Length [mm]: 380
- Fitting Position: Rear Axle both sides
- General Information: spender wire; brake pad wear indicator; 380MM
- Manufacturer: VIKA
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Length [mm]: 252
- Brake Type: Disc Brake
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MAX
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF - Brake Type: Disc Brake
- Length [mm]: 280
- Weight [kg]: 0.02
- Manufacturer: A.B.S.
-
for PR number: 1LL,
1ZA, 1ZC, 1ZK, 1LJ, 1ZD - Required quantity: 1
- Brake Type: Disc Brake
- Fitting Position: Front Axle
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MAX
- Brake Type: Disc Brake
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Length [mm]: 385
- Manufacturer: JPN
-
for PR number: 1KD,
1KE, 1KF, 1KK, 1KI, 1KJ, 1KU, 2EJ - Required quantity: 1
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Length [mm]: 385
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MAX
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
-
for brake disc diameter [mm]: 318,
338 - Length [mm]: 283
- Supplementary Article/Supplementary Info: Axle Kit
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: QBK
- Length [mm]: 385
- Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.019
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: FEB
- Additional information: F104919
- Lisainfo: F104919
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: ATE
-
for brake disc diameter [mm]: 318,
338 - Length 1 [mm]: 283
- Brake Type: Disc Brake
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0327
- Quality class: PJ
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 300
-
for PR number: 1KD,
1KE, 1KI - Brake Type: Disc Brake
- Length [mm]: 380
- Weight [kg]: 0.02
- Number of wear indicators [per axle]: 2
- Manufacturer: A.B.S.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Brake System: TRW
- Length [mm]: 392
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Name: QB WS0404A
- Fitting Position: Rear Axle
- Brake System: TRW
- Length 1 [mm]: 392
- Brake Type: Disc Brake
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0308
- Quality class: PJ
- Length [mm]: 385
- Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.019
- Name: SW 30 10 4919
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Brake Type: Disc Brake
- Fitting Position: Front Axle
- Warning Contact Length [mm]: 285
- Required quantity: 1
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MEY
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: Akebono
- for brake disc diameter [mm]: 350
- Quantity per packing unit: 2
- Length [mm]: 400
- Supplementary Article/Supplementary Info: Axle Kit
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: QBK
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Length [mm]: 252
- Brake Type: Disc Brake
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: BOS
- Lisainfo: 1987473604 BOSCH
- Additional information: 1987473604 BOSCH
-
for PR number: 1KD,
1KE, 1KF, 1KJ, 1KK, 2EJ - Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Warning Contact Length [mm]: 395
- Required quantity: 1
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MEY
-
for brake disc diameter [mm]: 350,
375 - Block Separation:
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
- Cable Length [mm]: 345
- Weight [kg]: 0.017
- for OE number: 4M0 615 121 AB
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 2EJ, 1KJ, 1KF, 1KK - Brake Type: Disc Brake
- Length [mm]: 390
- Number of wear indicators [per axle]: 1
- Manufacturer: BREMBO
- Name: BR A 00 524
- Fitting Position: Front Axle
- Brake System: Akebono
- for brake disc diameter [mm]: 350
- Quantity per packing unit: 2
- Length 1 [mm]: 400
- Brake Type: Disc Brake
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0304
- Quality class: PJ
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Brake Type: Disc Brake
- Name: DE LZ0406
- Manufacturer: DELPHI
- Fitting Position: Front Axle Left
-
for PR number: 1LC,
1LD, 1LE, 1LF - Brake Type: Disc Brake
- Length [mm]: 285
- Packaging length [cm]: 20
- Packaging width [cm]: 12
- Packaging height [cm]: 1
- Weight [kg]: 0.017
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TEX
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KJ, 1KK, 1KU, 2EJ - Length [mm]: 147
- Brake Type: Disc Brake
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: BOS
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Length [mm]: 280
- Version: 212163
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MD
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KJ, 1KK, 2EJ - Brake Type: Disc Brake
- Length [mm]: 395
- Packaging length [cm]: 26
- Packaging width [cm]: 15
- Packaging height [cm]: 1
- Weight [kg]: 0.019
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TEX
- Fitting Position: Front Axle
-
for PR number: 1LL,
1LJ, 1ZA, 1ZC - Length [mm]: 400
- Brake Type: Disc Brake
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: BOS
-
for PR number: 1LL,
1ZA, 1ZC, 1ZK, 1LI, 1LJ, 1ZD - Required quantity: 1
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 397
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Quality class: Q
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Required quantity: 1
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 281
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
-
for PR number: 1KD,
1KE, 1KF, 1KK, 1KI, 1KJ, 1KU, 2EJ - Required quantity: 1
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 394
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Quality class: Q
- Fitting Position: Rear Axle
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article/Supplementary Info: with accessories
-
Brake System: Lucas -
TRW - Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 17
- Manufacturer: KAMOKA
- for brake disc diameter [mm]: 300
-
for PR number: 1KD,
1KI, 1KE - Width [mm]: 129.3
- Height [mm]: 59
- Thickness [mm]: 17.5
-
WVA Number: 22308,
22309 - Fitting Position: Rear Axle
-
Manufacturer: ASHIKA-
KLOCKI
-
for PR number: 1KE,
1KF, 2EJ, 1KK, 1KJ, 1KI, 1KD - Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Height 1 [mm]: 59.1
- Width 1 [mm]: 129.2
- Thickness 1 [mm]: 17.5
- Manufacturer: JPN
-
for PR number: 1LA,
1LB - Fitting Position: Front Axle
- Width [mm]: 155.1
- Thickness [mm]: 17.3
- Height [mm]: 64
- Wear Warning Contact: with integrated wear warning contact
- Brake System: ATE
- Manufacturer: DENCKERMANN FILTRY
-
for PR number: 1KD,
1KE - for brake disc diameter [mm]: 300
- Fitting Position: Rear Axle
- Width [mm]: 129.2
- Thickness [mm]: 17.5
- Height [mm]: 59.1
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
- Manufacturer: DENCKERMANN ZAWIESZENIE
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Article number of recommended accessories: 98057400
-
for PR number: 1KD,
1KE, 1KI, 1KF, 1KU, 1KK, 2EJ - Fitting Position: Rear Axle
- Height [mm]: 59
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Info 2: with brake caliper screws
- Brake System: TRW
- Width [mm]: 129
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MAX
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 314
-
for PR number: 1LA,
1LB - Wear Warning Contact: with integrated wear sensor
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 64
- Warning Contact Length [mm]: 250
- Width 1 [mm]: 155.2
- Thickness 1 [mm]: 17
- Manufacturer: JPN
- for OE number: 8W0 698 451 T
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Manufacturer: TRUCKTEC
- Fitting Position: Front Axle
- Wear Warning Contact: with integrated wear warning contact
- Brake System: ATE
- Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 230
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE - for brake disc diameter [mm]: 300
- Quantity per packing unit: 4
-
Test Mark: E9 90R-
02A0120/ 4422 - Supplementary Article/Info 2: with brake caliper screws
- Supplementary Article/Supplementary Info: with accessories
- Wear Warning Contact: prepared for wear indicator
- Manufacturer Restriction: TRW
- Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 17.5
- Quality class: PJ
- Name: Brake pads
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Fitting Position: Rear Axle
- General Information: brake pads; rear; without wire
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KK, 2EJ - Quantity per packing unit: 4
- Thickness [mm]: 17.5
- Width [mm]: 129.2
- Height [mm]: 59
- Manufacturer: LPR
- Fitting Position: Rear Axle
- Brake System: TRW
- Width [mm]: 129
- Height [mm]: 58.6
- Thickness [mm]: 17.3
- WVA Number: 22308
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate - Vibration: with vibration damper
-
Test Mark: ECE-
R90 - Weight [kg]: 1.4
- Manufacturer: VALEO
- Name: VA 302470
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KK, 1KU, 2EJ - Quantity per packing unit: 4
- Fitting Position: Rear Axle
- Thickness [mm]: 17.5
- Width [mm]: 129.2
- Height [mm]: 59.1
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
- Weight [kg]: 1.6
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
- Number of wear indicators [per axle]: 1
- Width [mm]: 155.2
- Height [mm]: 63.8
- Thickness [mm]: 17
- Manufacturer: LPR
- Additional information: 05P2038
- Lisainfo: 05P2038
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KI - Width 1 [mm]: 129.2
- Height 1 [mm]: 59.1
- Thickness 1 [mm]: 17.5
- Brake System: TRW
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.51
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Rear Axle
-
for PR number: 1KF,
1KK, 1KJ, 2EJ, 1KU - Article number of recommended accessories: 98057400
- Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Lisainfo: QP2278
- Additional information: QP2278
-
for PR number: 1LA,
1LB - Fitting Position: Front Axle
- Height [mm]: 63.8
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
- Width [mm]: 155
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MAX
- Fitting Position: Front Axle
- Width [mm]: 194
- Height [mm]: 74
- Thickness [mm]: 16.8
- Wear Warning Contact: prepared for wear indicator
- Brake System: Akebono
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MAX
- Fitting Position: Rear Axle
-
for brake disc diameter [mm]: 300,
330 -
for PR number: 1KD,
1KE, 1KF, 1KJ, 1KK, 2EJ - Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17.5
- Length [mm]: 128.8
- Height [mm]: 58.5
- Wear Warning Contact: prepared for wear indicator
- Brake Pad: With bevelled edges
- Brake System: TRW
-
WVA Number: 22308,
22309 - Name: SK VKBP90165
- Manufacturer: SKF
- Fitting Position: Rear Axle
- for PR number: 1KD
- Quantity per packing unit: 4
-
FMSI Code: D1898-
9126 -
Test Mark: E9 90R-
02A0841/ 4422 - WVA Number: 22308 22309
- Brake System: TRW
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear indicator
- Width 1 [mm]: 129.2
- Width 2 [mm]: 129.1
- Height 1 [mm]: 58.6
- Height 2 [mm]: 58.6
- Thickness 1 [mm]: 17.3
- Thickness 2 [mm]: 17.3
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP3240
- Additional information: LP3240 DELPHI
- Lisainfo: LP3240 DELPHI
- for OE number: 4M0 698 151 AA
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Manufacturer: TRUCKTEC
-
for PR number: 1ZA,
1ZC, 1LL, 1ZK, 1LI, 1LJ, 1ZD - Fitting Position: Front Axle
- Width [mm]: 194
- Thickness [mm]: 16.9
- Height [mm]: 74
- Brake System: Akebono
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- for brake disc diameter [mm]: 300
-
for PR number: 1KD,
1KE, 1KI - Block Separation:
- Length [mm]: 129
- Width [mm]: 59.1
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 16.6
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.493
- Supplementary Article/Info 2: with fastening material
- Name: SW 30 11 6425
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake System: Trw
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Wear Warning Contact: prepared for wear indicator
- Vibration: with vibration damper
- Thickness 1 [mm]: 17
- Manufacturer: METELLI UKL.HAMULCOWY
-
for PR number: 1LC,
1LE, 1LD, 1LF - Article number of recommended accessories: 98057300
- Fitting Position: Front Axle
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- Brake System: Teves
- Width 1 [mm]: 251.8
- Width 2 [mm]: 210.2
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Manufacturer: DENCKERMANN HAMULCE
- Brake System: Trw
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Wear Warning Contact: prepared for wear indicator
- Vibration: with vibration damper
- Thickness 1 [mm]: 17
- Manufacturer: CIFAM
- Fitting Position: Front Axle
-
Brake System: Teves,
Continental - for PR number: 1LA
- Quantity per packing unit: 4
-
FMSI Code: D1953-
9180 -
Test Mark: E9 90R-
02A0841/ 4518 - WVA Number: 22383 22384 22385
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 155.2
- Width 2 [mm]: 155.2
- Height 1 [mm]: 63.6
- Height 2 [mm]: 63.6
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP3219
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KJ, 1KF, 1KK, 2EJ, 1KU, 1KI - Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 129.2
- Height [mm]: 59.1
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
-
Test Mark: E9 90R-
02A0120/ 4422 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Fitting Position: Front Axle
- Height 1 [mm]: 99
- Height 2 [mm]: 99.2
- Brake System: ATE
- Width 1 [mm]: 210
- Width 2 [mm]: 252
- Thickness 1 [mm]: 16.2
- Thickness 2 [mm]: 16.2
- Manufacturer: JPN
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
-
for PR number: 1LI,
1ZD - Production date to: 31.05.2021
- Fitting Position: Front Axle
- Thickness 1 [mm]: 16.8
- Supplementary Article/Supplementary Info: without accessories
-
Supplementary Article/Info 2: with anti-
squeak plate, with mounting manual - Number of pads: 4
- Number of wear indicators [per axle]: 2
- directional:
-
for brake disc thickness [mm]: 34,
36 - Test Mark: ECE R90 APPROVED
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN HANS PRIES
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact, Change warning contact together with the pads General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KJ, 1KK, 1KU, 2EJ -
Supplementary Article/Info 2: with anti-
squeak plate -
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 22308
- Thickness [mm]: 17.3
- Width [mm]: 129.1
- Height 1 [mm]: 58.9
- Height 2 [mm]: 59
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: BOS
- Fitting Position: Front Axle
- Height 1 [mm]: 99
- Height 2 [mm]: 99
- Brake System: ATE
- Width 1 [mm]: 210
- Width 2 [mm]: 252
- Thickness 1 [mm]: 16
- Thickness 2 [mm]: 16
- Manufacturer: KAMOKA
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Trw
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Wear Warning Contact: prepared for wear indicator
- Vibration: with vibration damper
- Thickness 1 [mm]: 17
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Width [mm]: 155
- Height [mm]: 63.8
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Fitting Position: Rear Axle
-
for PR number: 1KF,
1KK, 1KJ, 2EJ, 1KU - Article number of recommended accessories: 98057400
- Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Lisainfo: QP2278C
- Additional information: QP2278C
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 314
- for PR number: 1LA
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17
- Length [mm]: 155.2
- Height [mm]: 63.7
- Wear Warning Contact: incl. wear warning contact
- Brake Pad: With bevelled edges
- Brake System: ATE
-
WVA Number: 22383,
22384, 22385 - Name: SK VKBP80250E
- Manufacturer: SKF
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 17.3
- WVA Number: 22383
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 230
- Operating Mode: Electric
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.86
- Manufacturer: VALEO
- Name: VA 302320
-
for PR number: 1LC,
1LE, 1LD, 1LF - Article number of recommended accessories: 98057300
- Fitting Position: Front Axle
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- directional:
- Brake System: Teves
- Width 1 [mm]: 252
- Width 2 [mm]: 210
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MAX
-
for PR number: 1KE,
1KF, 2EJ, 1KK, 1KJ, 1KI, 1KD - Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Height 1 [mm]: 59.1
- Width 1 [mm]: 129.2
- Thickness 1 [mm]: 17.5
- Manufacturer: PROFIPOWER
- Fitting Position: Rear Axle
-
for PR number: 1KJ,
1KF, 1KK, 1KD, 1KE, 2EJ - Quantity per packing unit: 4
- Width [mm]: 129
- Thickness [mm]: 18
- Height [mm]: 59
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: TRW
- Supplementary Article/Info 2: with brake caliper screws
-
WVA Number: 22308,
22309 - Manufacturer: BREMBO
- Name: BR P 85 154
- for brake disc diameter [mm]: 318
-
for PR number: 1LC,
1LG, 1LD - Thickness [mm]: 15
- Test Mark: R90 Homologated
- Length [mm]: 251
- Weight [kg]: 2.716
- Height 1 [mm]: 72.9
- Height 2 [mm]: 73.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: TRW
- Supplementary Article/Info 2: with piston clip
-
WVA Number: 24408,
24409, 24743 - Height [mm]: 98.3
- Number of threaded bolts: 4
- Fitting Position: Front Axle
-
Manufacturer: ASHIKA-
KLOCKI
- for brake disc diameter [mm]: 318
-
for PR number: 1LC,
1LD, 1LG - Block Separation:
-
Length [mm]: 210,
252 - Width [mm]: 99
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 15
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 2.898
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for brake disc diameter [mm]: 318
-
for PR number: 1LC,
1LD, 1LG - Block Separation:
-
Length [mm]: 210,
252 -
Width [mm]: 98.7,
99 - Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 15.2
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 2.898
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 318
-
for PR number: 1LC,
1LD, 1LG - Width 1 [mm]: 252
- Height 1 [mm]: 99
- Thickness 1 [mm]: 16.3
- Width 2 [mm]: 209
- Height 2 [mm]: 99
- Brake System: ATE
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 3.6
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle
-
for brake disc diameter [mm]: 318,
338 -
for PR number: 1LE,
1LF, 1LH - Rim Size [inch]: 17.0
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 16.3
- Length [mm]: 127.3
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Wear Warning Contact: prepared for wear indicator
- Brake Pad: Without Bevelled Edges
- Brake System: Teves
-
WVA Number: 22402,
22403, 22404, 22405 - Name: SK VKBP80277
- Manufacturer: SKF
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 155.2
- Height [mm]: 64
- Thickness [mm]: 17
- Wear Warning Contact: not prepared for wear indicator
-
Test Mark: E9 90R-
02A0107/ 4518 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
-
Brake System: Teves,
Continental -
for PR number: 1LC,
1LE, 1LF - for article number: LP3239
- Quantity per packing unit: 4
-
FMSI Code: D1897-
9125 -
Test Mark: E9 90R-
02A0841/ 4523 - WVA Number: 22402 22403 22404 22
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear indicator
- Width 1 [mm]: 210.2
- Width 2 [mm]: 252.4
- Height 1 [mm]: 98.5
- Height 2 [mm]: 98.3
- Thickness 1 [mm]: 15.9
- Thickness 2 [mm]: 15.9
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP3239
- Fitting Position: Front Axle
- Width [mm]: 155
- Height [mm]: 63.8
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 210
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate -
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MEY
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KK, 1KU, 2EJ -
Article number of recommended accessories: 8DK 355 252-
791 - Quantity per packing unit: 4
- Width [mm]: 129.2
- Height [mm]: 59
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Info 2: with brake caliper screws
- WVA Number: 22308
- Brake System: TRW
- Weight [kg]: 1.45
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355024791
- Manufacturer: HELLA PAGID
-
for PR number: 1LC,
1LD, 1LE, 1LF - Quantity per packing unit: 4
- Fitting Position: Front Axle
- Thickness [mm]: 16.3
- Height 1 [mm]: 99
- Height 2 [mm]: 98.7
- Wear Warning Contact: prepared for wear indicator
- Brake System: ATE
- Width 1 [mm]: 210.2
- Width 2 [mm]: 251.8
- Weight [kg]: 3.05
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LE, 1LG, 1LH, 1LD, 1LF -
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 22402
- Number of springs: 8
- Thickness [mm]: 16.3
- Height 1 [mm]: 99
- Height 2 [mm]: 98.8
- Width 1 [mm]: 210.1
- Width 2 [mm]: 252
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: BOS
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LE, 1LD, 1LF - Article number of recommended accessories: 98057300
- Width 1 [mm]: 252
- Width 2 [mm]: 210
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- directional:
- Brake System: Teves
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
-
for PR number: 1LC,
1LD, 1LG, 1LH, 1LE, 1LF -
for brake disc diameter [mm]: 318,
338 - Block Separation:
- Fitting Position: Front Axle
- Width 1 [mm]: 210.1
- Width 2 [mm]: 252.8
- Height 1 [mm]: 99
- Height 2 [mm]: 98.8
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MEY
- Lisainfo: 0252240216
- Additional information: 0252240216
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Width [mm]: 155
- Height [mm]: 63.8
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 350
-
for PR number: 1LJ,
1LL, 1ZA, 1ZC - Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 16.5
- Length [mm]: 194
- Height [mm]: 74
- Wear Warning Contact: prepared for wear indicator
- Brake Pad: With bevelled edges
- Brake System: Akebono
-
WVA Number: 22611,
22612 - Name: SK VKBP80360
- Manufacturer: SKF
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Wear Warning Contact: with integrated wear sensor
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 22383
- Thickness [mm]: 16.9
- Width [mm]: 155.2
- Height [mm]: 63.8
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: BOS
- Fitting Position: Front Axle
- Width [mm]: 155.2
- Height [mm]: 63.9
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 210
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MEY
General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF - Quantity per packing unit: 4
- Thickness [mm]: 16.3
- Width 1 [mm]: 251.8
- Height 1 [mm]: 98.7
- Brake System: ATE
- Width 2 [mm]: 210.2
- Height 2 [mm]: 99
- Manufacturer: LPR
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KK, 1KU, 2EJ - Article number of recommended accessories: 98057400
- Width [mm]: 129.2
- Height [mm]: 59
- Thickness [mm]: 17.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Info 2: with brake caliper screws
- WVA Number: 22308
- Brake System: TRW
- Packaging length [cm]: 15.2
- Packaging width [cm]: 8.8
- Packaging height [cm]: 8.4
- Weight [kg]: 1.45
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX
- Fitting Position: Front Axle
-
for PR number: 1LE,
1LF, 1LH - for brake disc diameter [mm]: 338
- Quantity per packing unit: 4
-
Test Mark: E9 90R-
02A0107/ 4523 - Wear Warning Contact: prepared for wear indicator
- Manufacturer Restriction: ATE
- Width [mm]: 253
- Height [mm]: 99
- Thickness [mm]: 16.3
- Quality class: PJ
- Name: Brake pads
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
- Width [mm]: 155
- Thickness [mm]: 17
- Height [mm]: 64
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
- Warning Contact Length [mm]: 232
- Supplementary Article/Info 2: with piston clip
- directional:
- Number of wear indicators [per axle]: 1
-
WVA Number: 22383,
22384, 22385 - Name: BR P 85 153
- Manufacturer: BREMBO
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
- Width [mm]: 155.2
- Height [mm]: 63.8
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- WVA Number: 22383
- Brake System: Teves
- Weight [kg]: 1.7
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355024951
- Manufacturer: HELLA PAGID
- Fitting Position: Front Axle
-
for PR number: 1LE,
1LF, 1LH, 1LC, 1LG, 1LD - Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 252.8
- Height [mm]: 98.8
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
-
Test Mark: E9 90R-
02A0107/ 4523 - Manufacturer: TRW
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LE, 1LD, 1LF - Article number of recommended accessories: 98057300
- Width 1 [mm]: 252
- Width 2 [mm]: 210
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- directional:
- Brake System: Teves
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Fitting Position: Front Axle
- Brake System: Ate
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Wear Warning Contact: prepared for wear indicator
- Vibration: with vibration damper
- Thickness 1 [mm]: 16
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1LL, 1ZA, 1ZC -
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 22611
- Thickness [mm]: 16.8
- Width [mm]: 194.2
- Height [mm]: 74
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: BOS
-
for PR number: 1LC,
1LD, 1LG, 1LH, 1LE, 1LF -
for brake disc diameter [mm]: 318,
338 - Block Separation:
- Fitting Position: Front Axle
- Width 1 [mm]: 210.1
- Height 1 [mm]: 99
- Height 2 [mm]: 99.8
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: MEY
General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 300
-
for PR number: 1KD,
1KE, 1KI - paired article number: 563177JC
- Quantity per packing unit: 4
- Thickness [mm]: 17.5
- Test Mark: R90 Homologated
- Width [mm]: 129
- Height [mm]: 59
- Weight [kg]: 1.486
- Height 1 [mm]: 59
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
- Packing Type: Box
-
WVA Number: 22308,
22309 - Article number of recommended accessories: FWI452
- Packaging length [cm]: 16.8
- Packaging width [cm]: 9.7
- Packaging height [cm]: 6.2
- Manufacturer: JURID
- Fitting Position: Rear Axle
-
for PR number: 1KJ,
1KK, 2EJ, 1KD, 1KE, 1KI, 1KF - Quantity per packing unit: 4
- Brake System: TRW
- Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 18
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
for PR number: 1ZA,
1LJ, 1LL, 1ZC - Quantity per packing unit: 4
- Manufacturer Restriction: AKEBONO
- Width [mm]: 194.2
- Height [mm]: 74
- Thickness [mm]: 16.4
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: with accessories
-
Test Mark: E9 90R-
02A0107/ 4659 -
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: TRW
- Quality class: Q
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KE, 1KF, 1KI, 1KK, 1KJ, 2EJ - Width [mm]: 129
- Height [mm]: 58.9
- Thickness [mm]: 17.7
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
-
Brake System: Lucas /
TRW -
Test Mark: E1 90R-
02A0401/ 0216 -
Article number of recommended accessories: 24.8190-
0964.2, 24.8190- 0969.2, 24.8190- 0990.2 - MAPP code available:
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Fitting Position: Front Axle
-
for PR number: 1ZA,
1LJ, 1LL, 1ZC, 1LI, 1ZD - Quantity per packing unit: 4
- Manufacturer Restriction: AKEBONO
- Width [mm]: 194.2
- Height [mm]: 74
- Thickness [mm]: 16.8
- Wear Warning Contact: prepared for wear indicator
-
Test Mark: E9 90R-
02A0107/ 4659 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Width [mm]: 155.2
- Height [mm]: 63.8
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- WVA Number: 22383
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 1.7
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX
- Quality class: PJ
-
for PR number: 1LD,
1LF - Block Separation:
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Width 1 [mm]: 251.7
- Height 1 [mm]: 98.6
- Width 2 [mm]: 210.1
- Height 2 [mm]: 98.8
- Thickness [mm]: 16.3
- fulfils ECE norm: R90
- Manufacturer: METZGER
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
-
for PR number: 1LA,
1LB - Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 64
- Thickness [mm]: 17.3
- Wear Warning Contact: with integrated wear warning contact
- Warning Contact Length [mm]: 230
- Brake System: ATE
-
Test Mark: E1 90R-
02A0515/ 0358 - MAPP code available:
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
- Quality class: Q
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF - Article number of recommended accessories: 98057300
- Width 1 [mm]: 251.8
- Width 2 [mm]: 210.2
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- directional:
- WVA Number: 22402
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 25.8
- Packaging width [cm]: 12.8
- Packaging height [cm]: 10
- Weight [kg]: 2.36
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: TEX
- Fitting Position: Front Axle
-
for PR number: 1LE,
1LF, 1LC, 1LD - Quantity per packing unit: 4
- Thickness [mm]: 16
- Height [mm]: 99
- Wear Warning Contact: prepared for wear indicator
-
Supplementary Article/Supplementary Info: with counterweights,
without accessories - Brake System: Teves
- Width 1 [mm]: 210
- Width 2 [mm]: 252
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate -
WVA Number: 22405,
22402, 22403, 22404 - Name: BR P 85 164
- Manufacturer: BREMBO
-
for PR number: 1KD,
1KE, 1KF, 1KK, 1KI, 1KJ, 2EJ - Fitting Position: Rear Axle
- Width [mm]: 129
- Height [mm]: 58.9
- Thickness [mm]: 17.7
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
-
Brake System: Lucas /
TRW -
Test Mark: E1 90R-
02A0258/ 0217 -
Article number of recommended accessories: 24.8190-
0964.2, 24.8190- 0969.2, 24.8190- 0990.2 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Fitting Position: Front Axle
- Width 1 [mm]: 210
- Height 1 [mm]: 99
- Thickness 1 [mm]: 16.2
- Width 2 [mm]: 252
- Height 2 [mm]: 99.2
- Thickness 2 [mm]: 16.2
- Brake System: ATE
-
Test Mark: E1 90R-
02A0612/ 0436 -
Article number of recommended accessories: 24.8190-
0975.2 - MAPP code available:
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LD, 1LE, 1LF -
Article number of recommended accessories: 8DK 355 252-
911 - Quantity per packing unit: 4
- Width 1 [mm]: 251.8
- Width 2 [mm]: 210.2
- Height 1 [mm]: 98.7
- Height 2 [mm]: 99
- Thickness [mm]: 16.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 22402
- Brake System: Teves
- Weight [kg]: 2.36
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355025811
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
-
for PR number: 1KJ,
1KF, 1KK, 1KD, 1KE, 2EJ - Quantity per packing unit: 4
- Width [mm]: 129
- Thickness [mm]: 18
- Height [mm]: 59
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: TRW
- Supplementary Article/Info 2: with brake caliper screws
-
WVA Number: 22308,
22309 - Name: BR P 85 154X
- Manufacturer: BREMBO
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
-
for PR number: 1LA,
1LB - Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 64
- Thickness [mm]: 17.3
- Wear Warning Contact: with integrated wear warning contact
- Warning Contact Length [mm]: 230
- Brake System: ATE
-
Test Mark: E1 90R-
02A0402/ 0359 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
-
for PR number: 1LA,
1LB - Quantity per packing unit: 4
- Width [mm]: 155
- Thickness [mm]: 17
- Height [mm]: 64
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
- Warning Contact Length [mm]: 232
- directional:
- Number of wear indicators [per axle]: 1
-
WVA Number: 22384,
22385, 22383 - Name: BR P 85 153X
- Manufacturer: BREMBO
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
- for brake disc diameter [mm]: 350
- Fitting Position: Front Axle
-
for PR number: 1ZA,
1ZK, 1LL, 1ZC - Quantity per packing unit: 4
- Brake System: AKEBONO
- Width [mm]: 194
- Height [mm]: 74
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear indicator
-
Supplementary Article/Supplementary Info: Photo corresponds to scope of supply,
with spring - Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 318
-
for PR number: 1LC,
1LD, 1LG -
paired article number: 563174JC-
1 - Quantity per packing unit: 4
- Thickness [mm]: 15.5
- Test Mark: R90 Homologated
- Width [mm]: 251
- Height [mm]: 105
- Weight [kg]: 3.05
- Height 1 [mm]: 105
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: ATE
- Packing Type: Box
- Supplementary Article/Info 2: with piston clip
-
WVA Number: 22402,
22403, 22404, 22405 - Article number of recommended accessories: FWI453
- Packaging length [cm]: 27.5
- Packaging width [cm]: 17.4
- Packaging height [cm]: 11.3
- directional:
- Manufacturer: JURID
- Fitting Position: Front Axle
-
for PR number: 1LC,
1LE, 1LD, 1LF - Quantity per packing unit: 4
- Braking System: Low dust brake pads
- Brake System: ATE
- Width 1 [mm]: 252
- Width 2 [mm]: 210
- Height 1 [mm]: 99
- Height 2 [mm]: 99
- Thickness [mm]: 16
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
-
for PR number: 1ZA,
1ZC, 1LL, 1ZK, 1LI, 1LJ, 1ZD - Fitting Position: Front Axle
- Width [mm]: 194
- Height [mm]: 74
- Thickness [mm]: 16.9
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Akebono
-
Test Mark: E1 90R-
02A0612/ 0469 -
Article number of recommended accessories: 13.0460-
0520.2 - MAPP code available:
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
-
for PR number: 1LC,
1LD, 1LE, 1LF, 1LG, 1LH - Fitting Position: Front Axle
- Width 1 [mm]: 210
- Height 1 [mm]: 99
- Thickness 1 [mm]: 16.2
- Width 2 [mm]: 252
- Height 2 [mm]: 99.2
- Thickness 2 [mm]: 16.2
- Brake System: ATE
-
Test Mark: E1 90R-
02A0479/ 0662 -
Article number of recommended accessories: 24.8190-
0975.2 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
-
for PR number: 1LE,
1LF, 1LC, 1LD - Quantity per packing unit: 4
- Thickness [mm]: 16
- Height [mm]: 99
- Wear Warning Contact: prepared for wear indicator
-
Supplementary Article/Supplementary Info: without accessories,
with counterweights - Brake System: Teves
- Width 1 [mm]: 210
- Width 2 [mm]: 252
-
Supplementary Article/Info 2: with anti-
squeak plate -
WVA Number: 22405,
22402, 22403, 22404 - Manufacturer: BREMBO
- Name: BR P 85 164X
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 350
-
for PR number: 1ZA,
1ZK, 1LL, 1ZC - Quantity per packing unit: 4
- Braking System: Low dust brake pads
- Brake System: AKEBONO
- Width [mm]: 194
- Height [mm]: 74
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear indicator
-
Supplementary Article/Supplementary Info: Photo corresponds to scope of supply,
with spring - Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
-
for PR number: 1ZA,
1ZC, 1LL, 1ZK, 1LI, 1LJ, 1ZD - Fitting Position: Front Axle
- Width [mm]: 194
- Height [mm]: 74
- Thickness [mm]: 16.9
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Akebono
-
Test Mark: E1 90R-
02A0577/ 0403 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.