• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: ASZ
• Supplementary Article/Info 2: without connector parts
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Engine Code: ASZ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: ASZ
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Manufacturer: NTY
• Name: NTY ECM-AU-001

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Housing Type: without housing
• Supplementary Article/Info 2: with bracket, with seal ring
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 4
• Manufacturer: JP GROUP
• Lisainfo: Thrust sensor for intercooler
• Additional information: Thrust sensor for intercooler

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 445
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Current carrying capacity [A]: 9
• Operating voltage [V]: 24
• for OE number: 1J6 943 021 B, 1JE 943 021, 1K8 943 021 C
• for article number: 70660022
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Cable Length [mm]: 280
• Number of connectors: 3
• Housing Colour: black
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Vehicle Identification Number (VIN) to: 8L-W-150000
• Number of pins: 4
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: ECP-AU-000
• Manufacturer: NTY

• Engine Code: ASZ
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Fitting Position: Fuel Line
• for OE number: 038 906 081 B, 5033378AA
• Name: Andur, ktusetemperatuur
• Manufacturer: MD

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• General Information: pressure sensor
• Manufacturer: VIKA

• Sensor Type: Active sensor
• for OE number: 03G 906 433
• Manufacturer: KAMOKA

• Sensor Type: Active sensor
• for OE number: 1100748
• Manufacturer: KAMOKA

• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX
• Lisainfo: 21-0216
• Additional information: 21-0216

• for OE number: 038 906 051 C
• Manufacturer: TRUCKTEC

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Fitting Position: Fuel Line
• Housing Type: without housing
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 8L-X-000001
• Number of pins: 4
• Housing Colour: black
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Manufacturer: BRM

• Number of pins: 5
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Voltage [V]: 12
• Length [mm]: 340
• Number of pins: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Number of pins: 5
• Connector Shape: D Shape
• Supplementary Article/Info 2: without integrated air temperature sensor
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: with cable
• Length [mm]: 530
• Height [mm]: 46
• Resistor [Ohm]: 190
• Number of connectors: 3
• Manufacturer: VERNET

• Length [mm]: 380
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Cable Length [mm]: 445, 330
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: D Shape
• Number of mounting bores: 1
• Socket colour: black
• Weight [kg]: 0.06
• for OE number: 045 957 147 A
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: D Shape
• Cable Length [mm]: 380
• Sensor Type: Hall Sensor
• for OE number: 045 957 147 B
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 4
• Pressure from [kPA]: 28
• Manufacturer: DELPHI

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Length [mm]: 245
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year from: 05.2002
• Vehicle Identification Number (VIN) from: 8L2105001
• Housing Type: with housing
• Fabrication Number: EPP-AU-001
• Manufacturer: NTY

• Length [mm]: 358
• Number of connectors: 3
• Cable Length [mm]: 265
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN
• Additional information: F37607
• Lisainfo: F37607

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with cable protection pipe
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ASZ
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Voltage [V]: 12
• Fabrication Number: EPP-AU-031

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.06
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253807
• Additional information: VAL253807

• Length [mm]: 358
• Number of connectors: 3
• Cable Length [mm]: 265
• Weight [kg]: 0.04
• Name: SW 30 93 7607
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: EPP-VW-010
• Manufacturer: NTY

• Engine Code: ASZ
• for OE number: 03G 957 147 B
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Cable Length [mm]: 350, 270
• Length [mm]: 350
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: D Shape
• Number of mounting bores: 1
• Socket colour: grey
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 260
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012681051
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ASZ
• Length [mm]: 340
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 5
• Fabrication Number: EPP-AU-018
• Manufacturer: NTY

• for OE number: 06A 906 461 D
• Manufacturer: KAMOKA

• Voltage [V]: 12
• for OE number: 059 906 461 A
• Manufacturer: KAMOKA

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 038 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06A906461D
• Number of pins: 5
• Voltage [V]: 12
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 8L-2-105 001
• for OE number: 28906461
• Number of pins: 5
• Voltage [V]: 12
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 04.2002
• Vehicle Identification Number (VIN) to: 8L-2-105 000
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Sensor Type: Hall Sensor
• Cable Length [mm]: 306
• Supplementary Article/Supplementary Info: with cable protection pipe
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: ASZ
• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: with cable
• Length [mm]: 445
• Manufacturer: FAE

• Construction Year from: 04.2002
• Vehicle Identification Number (VIN) from: 8L-2-105 001
• Housing Type: with housing
• Number of pins: 5
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: 8L-2-105 000
• for OE number: 071906461A
• Number of pins: 5
• Voltage [V]: 12
• Manufacturer: DELLO AUTOMEGA

• Engine Code: ASZ
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Engine Code: ASZ
• Vehicle Identification Number (VIN) from: 8L-2-105001
• Number of pins: 5
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Construction Year from: 04.2002
• Vehicle Identification Number (VIN) from: 8L..2..105001
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 8L-2-105 001
• for OE number: 1209109
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 09.2000, 04.2002
• Vehicle Identification Number (VIN) from: 8L 2 105 001
• Engine Code: ASZ
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.32
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV083

• Vehicle Identification Number (VIN) to: 8L-2-105000
• Housing Type: with housing
• Number of pins: 5
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV508
• Manufacturer: ESEN SKV

• Quantity: 1
• Vehicle Identification Number (VIN) from: 8L-2-105 001
• Recommended additional repairs: Air Filter
• General Information: air mass meter
• Manufacturer: VIKA

• Engine Code: ASZ
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Vehicle Identification Number (VIN) from: 8L-2-105001
• Housing Type: with housing
• Number of pins: 5
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• Article number of recommended accessories: 113 883
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 04.2002
• Number of pins: 5
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV501
• Manufacturer: ESEN SKV

• Construction Year from: 05.2002
• Vehicle Identification Number (VIN) from: 8L_2_105001
• Mounting Type: Bolted
• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 05.2002
• Vehicle Identification Number (VIN) from: 8L2105001
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG
• Additional information: 213719641019 MAG
• Lisainfo: 213719641019 MAG

• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Transmission Type: 5-Speed Automatic Transmission, Automatic Transmission Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 04.2002
• Vehicle Identification Number (VIN) from: 8L..2..105001
• Supplementary Article/Supplementary Info: without suction pipe
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!

• Engine Code: ASZ
• Vehicle Identification Number (VIN) from: 8L-2-105 001
• for article number: V10-72-0959, V10-72-0958
• Housing Type: without housing
• Number of pins: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Alternatively:
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY