Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
-
Material: FPM
(fluoride rubber) - Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10 mm -
Additional information: Oil seal,
35x48x10 mm
- Fitting Position: transmission sided
- Engine Code: AKE
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: Rubber,
Rubber/ Metal - for OE number: 068103051G
- Manufacturer: FAI
- Fitting Position: frontal sided
- Weight [kg]: 0.016
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
-
Material: ACM
(Polyacrylate) - Required quantity: 1
- Thickness [mm]: 10
- General Information: Oil seal for crankshaft; front; 35*48*10 mm
- Manufacturer: VIKA
- Fitting Position: frontal sided
- General Information: Oil seal for crankshaft; front
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: ASW
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01967
- Fitting Position: frontal sided
- Required quantity: 2
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 413009310
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Fabrication Number: NUP-
VW- 012 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist - Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.016
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AKE
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
- Required quantity: 2
- Fitting Position: frontal sided
-
Engine Code: AKE,
BAU, BDH - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Manufacturer: BGA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- General Information: Oil seal for camshaft; 47*10*32
- Manufacturer: VIKA
- Required quantity: 2
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 2
-
Engine Code: AKE,
BDH, BAU - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: frontal sided
-
Engine Code: AKE,
BAU, BDH - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Engine Code: AKE
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: FPM
(fluoride rubber) - for OE number: 034115137A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
OLIPUMP - Manufacturer: COT
- Fitting Position: frontal sided
- General Information: Oil seal for crankshaft; front
- Manufacturer: BORSEHUNG
- Fitting Position: frontal sided
-
Engine Code: AKE,
BDH, BAU - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Fitting Position: frontal sided
- Engine Code: AKE
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 034115147A
- Manufacturer: FAI
- Fitting Position: transmission sided
-
Engine Code: AKE,
BAU, BDH - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 12
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 12
-
Radial Shaft Seal Design: AW/
BS -
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Supplementary Article/Info 2: with mounting sleeve
- Name: Rongastihend
- Manufacturer: ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Engine Code: AKE
- Fitting Position: Pulley side
- Manufacturer: CORTECO USZCZELNIACZE
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Housing Type: with housing
- Housing material: Sheet Steel
- Manufacturer: TOPRAN
Sealing lip material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Height [mm]: 15
- Radial Shaft Seal Design: SP
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Additionally required articles (article numbers): 422.822
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Engine Code: AKE
- Fitting Position: transmission sided
-
Supplementary Article/Info 2: with flange,
with mounting sleeve - Height 1 [mm]: 15
- Outer Diameter 1 [mm]: 205
- Outer Diameter 2 [mm]: 235
- Inner Diameter 1 [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
Material: TFE (tetrafluorethylene)/ACM (polyacryl-rubber)/non-woven
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks