Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Colour Coding: blue
- Number of connectors: 1
- External Thread [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thread Size: M10x1
- Length [mm]: 46
- Spanner Size: 24
- Colour Coding: white
- Number of pins: 1
- Manufacturer: DELLO AUTOMEGA
- Thread Size: M10x1
- Length [mm]: 46
- Spanner Size: 24
- Colour: blue
- Number of pins: 1
- Manufacturer: DELLO AUTOMEGA
- Thread Size: M10
- Colour Coding: brown
- Number of pins: 1
- Spanner Size: 24
- Supplementary Article/Supplementary Info: with seal
- for OE number: 056919081C
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 4A-
M- 000 001 -
Vehicle Identification Number (VIN) to: 4A-
M- 100 000 - Thread Size: M10x1
- Colour: grey
- Number of pins: 1
- Spanner Size: 24
- Manufacturer: DELLO AUTOMEGA
- Plug Type: Blade Terminal
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Shifting Points [bar]: 0.3
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Switch point from [bar]: 1.6
-
Surface: Zinc-
coated - Switch point to [bar]: 2
- Weight [kg]: 0.03
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Supplementary Article/Info 2: with seal ring
- Colour Coding: white
- Length [mm]: 46
- General Information: oil pressure switch
- Manufacturer: VIKA
- Plug Type: Blade Terminal
- Operating Mode: Hydraulic
- Colour Coding: blue
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
15 - 0, 35 - Manufacturer: TOPRAN
- Lisainfo: 100 345 HP
- Additional information: 100 345 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: ABC
- Colour: blue
- Pressure [bar]: 0.3
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Quantity: 1
-
Vehicle Identification Number (VIN) from: 4A-
N- 000 001 -
Vehicle Identification Number (VIN) to: 4A-
M- 100 000 -
Surface: Zinc-
coated -
Control Range [bar]: 0,
15 - 0, 35 - Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Thread Length [mm]: 13
- Inner Diameter [mm]: 2.54
- Spanner Size: 24
- Supplementary Article/Info 2: with seal ring
- Colour Coding: blue
- Length [mm]: 46
- General Information: oil pressure switch
- Manufacturer: VIKA
- Engine Code: ABC
- Colour: blue
- Pressure [bar]: 0.3
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Additional information: 1-
800- 108 -
Lisainfo: 1-
800- 108
- Thread Size: M 10x1
- Housing Colour: black
- Pressure [bar]: 0.4
- Manufacturer: FAE ELEKTRYKA
- Switch point from [bar]: 1.6
- Switch point to [bar]: 2
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Length [mm]: 46
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ABC
- Colour: blue
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Length [mm]: 46
- Spanner Size: 24
- Colour Coding: blue
- Number of pins: 1
- Thread Size: M10x1
- Pressure from [bar]: 0.15
- Pressure to [bar]: 0.35
- Diameter [mm]: 3
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Length [mm]: 46
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 23 0002
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 46
- Thread Size: M10x1
- Spanner Size: 24
- Colour Coding: white
- Number of pins: 1
- Pressure [bar]: 1.8
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Length [mm]: 46
- Thread Size: M10x1
- Spanner Size: 24
- Colour Coding: grey
- Number of pins: 1
- Pressure from [bar]: 0.75
- Pressure to [bar]: 1.05
- Diameter [mm]: 2
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Switch point from [bar]: 2.3
- Length [mm]: 46
- Switch point to [bar]: 2.7
- Inner Diameter [mm]: 2.48
- External Thread Size: M10 x 1
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: red
- Screw length below head [mm]: 12
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9768
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Switch point from [bar]: 0.75
- Switch point to [bar]: 1.05
- External Thread [mm]: M10x1
- Number of connectors: 1
- Colour Coding: grey
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Pressure [bar]: 1.8
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Engine Code: ABC
- Pressure [bar]: 3.5
- Housing Colour: blue
-
Thread Size: M10×1-
6g - Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: DE SW90009
- Lisainfo: SW90009
- Additional information: SW90009
- Colour: grey
- Pressure [bar]: 0.9
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: white
- Pressure [bar]: 1.8
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: blue
- Shifting Points [bar]: 0.25
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Length [mm]: 46
- Switch point from [bar]: 1.6
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 23 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure [bar]: 0.3
- Thread Size: M10 x 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Thread Size: M 10x1
- Colour: brown
- Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.25
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Article/Supplementary Info: with seal
-
Thread Size: M10x1,
0 -
Control Range [bar]: 0,
15 - 0, 35 - Colour: blue
- Weight [kg]: 0.038
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M 10x1
- Housing Colour: white
- Pressure [bar]: 0.9
- Manufacturer: FAE
- Engine Code: ABC
- Colour: grey
- Pressure [bar]: 0.9
- Thread Size: M10x1
- Spanner Size: 24
- Corresponds to the original part in colour: brown
- Manufacturer: FACET
- Engine Code: ABC
- Colour: grey
- Pressure [bar]: 0.9
- Thread Size: M10x1
- Spanner Size: 24
- Corresponds to the original part in colour: brown
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Length [mm]: 46
- Switch point from [bar]: 0.75
- Switch point to [bar]: 1.05
- Inner Diameter [mm]: 2.48
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: grey
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M10x1,
0 - Colour: white
- Weight [kg]: 0.031
- Pressure from [bar]: 0.7
- Pressure to [bar]: 1
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M10x1,
0 - Colour: white
- Weight [kg]: 0.033
- Pressure from [bar]: 1.6
- Pressure to [bar]: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 1
- Pressure [bar]: 0.3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Length [mm]: 46
- Switch point from [bar]: 0.75
- Switch point to [bar]: 1.05
- Inner Diameter [mm]: 2.48
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: grey
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 23 0004
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Switch point from [bar]: 1.6
- Length [mm]: 46
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Connecting thread: M10 x 1
- Manufacturer: ERA
- Pressure from [bar]: 0.75
- Pressure to [bar]: 1
- Combi Switch Function: Normally Open Contact
- Colour: grey
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.15
- Pressure to [bar]: 0.35
- Number of pins: 1
- Plug Type: Blade Terminal
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Olisurvellitus
- Manufacturer: HEL
- Thread Size: M 10x1
- Housing Colour: red
- Pressure [bar]: 2.5
- Manufacturer: FAE
- Engine Code: ABC
- Number of pins: 1
- Colour: blue
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: EPS
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.75
- Pressure to [bar]: 1.05
- Number of pins: 1
- Plug Type: Blade Terminal
- Corresponds to the original part in colour: grey
- Assy./disassy. by qualified personnel required!:
- Name: HE 6ZL003259481
- Manufacturer: HELLA
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 1.6
- Pressure to [bar]: 2
- Number of pins: 1
- Corresponds to the original part in colour: Milk White
- Assy./disassy. by qualified personnel required!:
- Name: HE 6ZL003259441
- Manufacturer: HELLA
- Pressure from [bar]: 0.15
- Pressure to [bar]: 0.35
- Combi Switch Function: Normally Closed Contact
- Colour: blue
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Engine Code: ABC
- Colour: red
- Pressure [bar]: 2.5
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Observe technical data:
- Manufacturer: BOSCH
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M10x1
- Manufacturer: FAE
-
Vehicle Identification Number (VIN) from: 4A-
N- 000001 - Thread Size: M10X1
- Shifting Points [bar]: 0.3
- Working pressure to [bar]: 5
- Manufacturer: METZGER