Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Type: 4-
Speed Automatic Transmission - Siseläbimõõt [mm]: 51
- Välisläbimõõt [mm]: 65
- Kõrgus (mm): 7
-
Materjal: FKM
(Fluorosüsinik- kautšuk) - Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: stirnseitig
- Siseläbimõõt [mm]: 51
- Välisläbimõõt [mm]: 65
- Jämedus/Tugevus (mm): 7
-
Kaal (kg): 0,
016 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ANA
- Quantity per packing unit: 10
- Installatsiooni pool: stirnseitig
-
Kaal (kg): 0,
035 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AHL
- OE-numbri jaoks: 03G 105 021 C
- Jämedus/Tugevus (mm): 10
- Siseläbimõõt [mm]: 35
- Installatsiooni pool: stirnseitig
- Välisläbimõõt [mm]: 48
-
Kaal (kg): 0,
031 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 06A 115 105 B
- Observe service information:
-
Fabrication Number: BPO-
VW- 008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Välisläbimõõt [mm]: 47
- Jämedus/Tugevus (mm): 10
- Siseläbimõõt [mm]: 32
- Installatsiooni pool: kastipoolselt
-
Kaal (kg): 0,
195 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Rakendustüüp: mehhaaniliselt
- Piirangutega toode/piirangu info: ilma sisendõhutoruta
- Piirangutega toode/piirangu info 2: koos hammsrattaga
- Hammastehulk: 31
- Manufacturer: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Engine Code: AHL,
ANA, ARM - Block Separation:
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Hammastehulk: 31
- Name: OLIPUMP
- Manufacturer: MAX
- Korpuse materjal: Alumiinium
- Piirangutega toode/piirangu info 2: koos hammsrattaga
- Hammastehulk: 31
- soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
- jälgida süsteemi mahutavust:
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AHL,
ARM, ANA - Manufacturer: JPN
- Construction Year from: 03.1995
- Manufacturer: BGA
- Name: Olipump
- Manufacturer: MAG
-
Engine Code: AHL,
ANA, ARM - Manufacturer: DELLO AUTOMEGA
- OE-numbri jaoks: 06A 115 105 B
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Engine Code: AHL,
ANA, ARM - Manufacturer: JP GROUP
- Lisainfo: Oil pump
- Additional information: Oil pump
- Engine Code: AHL
- Construction Year from: 10.1996
- OE-numbri jaoks: 06A 115 105 D
- Manufacturer: FAI
- Name: FAI OP233
-
Engine Code: AHL,
ANA, ARM - Block Separation:
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Ühe käigu laius [mm]: 96
- Hammastehulk: 31
- Name: OLIPUMP
- Manufacturer: PIE
-
Engine Code: AHL,
ARM, ANA - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Pikkus (mm): 182
- Kõrgus (mm): 187
- Jälgige sõidukitootja juhiseid:
- Laius (mm): 162
-
Kaal (kg): 1,
48 - jälgida süsteemi mahutavust:
- Tehnilisi andmeid jälgida:
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AHL,
ANA, ARM - Block Separation:
- Rakendustüüp: mehhaaniliselt
- OE-numbri jaoks: 06A115105H
- Manufacturer: HEPU UKLAD OLEJOWY
- tootekoodile: 06A 115 105 B
- Laius 1 (mm): 145
- Kõrgus 1 (mm): 125
- Pikkus 1 [mm]: 155
- Kaal (g): 1 013
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Engine Code: AHL,
ANA, ARM - Manufacturer: METZGER
-
Engine Code: AHL,
ARM, ANA - Vehicle Identification Number (VIN) from: ******8D*W*040001
- Block Separation:
- Mootori keti mõõt: G52H
-
Kaal (kg): 1,
28 - OE-numbri jaoks: 06A 115 105 B S1
- Piirangutega toode/piirangu info: Ketipingutiga
- Hooldusinfot jälgida:
- Name: OLIPUMP
- Manufacturer: FEB
Tehniline informatsioon: Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AHL,
ARM, ANA -
Kaal (kg): 1,
04 - OE-numbri jaoks: 06A 115 105 B
- Piirangutega toode/piirangu info 2: koos hammsrattaga
- Hooldusinfot jälgida:
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AHL,
ARM, ANA - Vehicle Identification Number (VIN) to: ******8D*W*040000
- Block Separation:
- Mootori keti mõõt: G62
-
Kaal (kg): 1,
29 - Piirangutega toode/piirangu info: Ketipingutiga
- OE-numbri jaoks: 06A 115 105 B S2
- Hooldusinfot jälgida:
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks