• Pikkus (mm): 1 050
• Lambda andur: Sond
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AHL
• Construction Year from: 10.1996
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 032906265
• Kvaliteet: OE
• Tootja piirang: DENSO
• Ühendustehnika: with rubber grommet
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 1 225
• Pistikkontaktide arv: 4
• Kaal (g): 163
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 210
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
POLO (6N1), 10.94-10
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO (6N1), 10.94-10
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Overall Length [mm]: 1,010
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-005
• Manufacturer: NTY
• Name: NTY ESL-AU-005

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Engine Code: ANA
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: soojendatud
• Kaablipikkus (mm): 775
• Pistikkontaktide arv: 4
• Ülekandeliinide arv: 4
• Keermemõõt: M 18x1,5
• Pistikukatte kuju: D-kuju
• OE-numbri jaoks: 06B906265E
• Manufacturer: DELLO AUTOMEGA

• Engine Code: ANA
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Vehicle Identification Number (VIN) to: 8E..2..400000
• Fitting Position: before catalytic converter
• Lambda andur: Bistabiilne andur
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Length [mm]: 1,100
• Fabrication Number: ESL-VW-007
• Manufacturer: NTY

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Diagnostic Probe
• Engine Code: ANA
• Construction Year from: 06.1999
• Kaablipikkus (mm): 650
• Garantii: 3 aastat garantii
• Kaal (kg): 0,13
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV129
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ANA
• Construction Year from: 07.1999
• Lambda Sensor: Diagnostic Probe
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ADP, AHL, ARM
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 050
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: ADP, AHL, ARM
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AHL
• Construction Year from: 10.1996
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Engine Code: ANA
• Kaablipikkus (mm): 775
• Lambda andur: Titaanandur, soojendatud
• Name: DE ES21311-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe
• Engine Code: ADP, AHL, ARM
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 1 140
• Lambda andur: Sõrmesensor, soojendatud
• Manufacturer: DELPHI

• Engine Code: ANA
• Construction Year from: 07.1999
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 95
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121
• Quality class: Q

Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Construction Year to: 07.1999
• Exhaust System: before catalytic converter
• Pinge [V]: 12
• Pikkus (mm): 985
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV045

• Takistus [oom]: 3,5
• Pikkus (mm): 720
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Kaablipikkus (mm): 720
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Ühendushulk: 4
• Pikkus (mm): 1 080
• Ülekandeliinide arv: 4
• Takistus [oom]: 6
• Kaablipikkus (mm): 1 080
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Pinge [V]: 12
• Pikkus (mm): 1 175
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV038

• Takistus [oom]: 2,1
• Pikkus (mm): 1 020
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Kaablipikkus (mm): 1 020
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Code: ADP, AHL, ARM
• Kaablipikkus (mm): 730
• Lambda andur: Sõrmesensor, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"

• Lambda andur: Sond
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 950
• OE-numbri jaoks: 06B 906 265 B
• Manufacturer: MEAT&DORIA

• Engine Code: ANA
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Vehicle Identification Number (VIN) to: 8E..2..400 000
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Code: ANA
• Kaablipikkus (mm): 1 060
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)"

• Engine Code: ADP, AHL, ARM
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 800
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV705

• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 1 060
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,16
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV626
• Manufacturer: ESEN SKV

• Construction Year to: 07.1999
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 1 440
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,22
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

• Engine Code: ADP, AHL, ARM
• Lambda Sensor: Regulating Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Pikkus (mm): 1 020
• Ühenduste arv: 4
• Manufacturer: VERNET

• Engine Code: ADP, AHL, ARM
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANA
• Construction Year from: 07.1999
• Transmission Type: Manual Transmission
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistiku värv: pruun
• OE-numbri jaoks: 036 906 262 F
• Pikkus (mm): 580
• Kaal (kg): 0,148
• Keermemõõt: M18 x 1,5
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 4
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ADP, AHL, ARM
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 010
• ka universaaltootena saadav vaata toode-nr.: 0258986505
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 06.1999
• Lambda Sensor: Diagnostic Probe
• Engine Code: ANA
• Kaablipikkus (mm): 650
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Lisainfo: ES20270-12B1
• Additional information: ES20270-12B1

• Engine Code: ADP,AHL,ARM
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 020
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Name: VA 368466
• Manufacturer: VALEO

• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 100
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Name: VA 368455
• Manufacturer: VALEO

• Engine Code: ADP, AHL, ARM
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 860
• tootekoodile: 81546
• Manufacturer: MEAT&DORIA

• Engine Code: ANA
• Construction Year from: 06.1999
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Pikkus (mm): 700
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77004
• Manufacturer: FAE

• Engine Code: ARM, AHL, ADP
• Construction Year to: 07.1999
• Lambda andur: Sond
• Pikkus (mm): 1 050
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77004
• Installatsiooni pool: katalüsaatori ees
• Manufacturer: FAE

• Engine Code: ANA
• Construction Year from: 07.1999
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 06B906265A
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 775
• Pistikkontaktide arv: 4
• Kaal (g): 119
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-1566

• Engine Code: ANA
• Construction Year from: 07.1999
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 06B906265B
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 1 055
• Pistikkontaktide arv: 4
• Kaal (g): 129
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 160
• Manufacturer: DENSO
• Name: DN DOX-1589

• Construction Year from: 07.1999
• Engine Code: ANA
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 720
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO

• Engine Code: AHL, ARM, ADP
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pikkus (mm): 1 020
• Ülekandeliinide arv: 4
• Manufacturer: VDO

• Engine Code: ANA
• Lambda andur: Sond, soojendatud
• Pinge [V]: 12
• Ühendushulk: 4
• Kaablipikkus (mm): 1 100
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Construction Year from: 07.1999
• Engine Code: ANA
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Pikkus (mm): 525
• Ülekandeliinide arv: 4
• Manufacturer: VDO

• Engine Code: ANA
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 07.1999
• Engine Code: ANA
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pikkus (mm): 1 080
• Ülekandeliinide arv: 4
• Manufacturer: VDO

• Engine Code: ANA
• Construction Year from: 07.1999
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe
• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 580
• tootekoodile: 81707
• Manufacturer: MEAT&DORIA

• Engine Code: ANA
• Construction Year from: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistikukatte kuju: D-kuju
• Ühendushulk: 4
• Väljalaskesüsteem: pärast katalüsaatorit
• Kaablipikkus (mm): 450
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.